पेंटर, निर्माण और रखरखाव
निर्माण, रखरखाव और मरम्मतAI एक्सपोजर
- डेटा स्रोत: BLSप्रकाशन: 2026-08
कम· सापेक्ष
कमचार सापेक्ष श्रेणियाँबहुत उच्चव्यवसाय-समूह स्तर का मान
मापक्रम, आधार और स्रोत
चार सापेक्ष बैंड (कम / मध्यम / उच्च / बहुत उच्च)
BLS रोज़गार पूर्वानुमान तालिका के 831 विस्तृत व्यवसायों के आधार पर। मान NEM (नेशनल एम्प्लॉयमेंट मैट्रिक्स) कोड के स्तर पर दिया जाता है, इसलिए एक ही NEM कोड वाले व्यवसायों को वही बैंड मिलता है
- डेटा स्रोत: Anthropicप्रकाशन: 2026-03
0.000
0.000यहाँ दिए गए मानों की सीमा0.745मापक्रम, आधार और स्रोत
- डेटा स्रोत: ILOप्रकाशन: 2025
0.13
0.09यहाँ दिए गए मानों की सीमा0.70व्यवसाय-समूह स्तर का मान
मापक्रम, आधार और स्रोत
जेनरेटिव AI एक्सपोजर सूचकांक, प्रकाशित रूप में 0–1
ISCO-08 यूनिट समूह — समान कोड वाले सभी व्यवसायों को यही मान मिलता है
यह इस साइट की गणना है, ILO द्वारा प्रकाशित आँकड़ा नहीं: इस साइट द्वारा ILO डेटासेट से जोड़े गए 1,012 व्यवसायों में से 97% इस मान के बराबर या उससे अधिक हैं।
यह स्रोत किस प्रकार का आँकड़ा प्रकाशित करता है
BLS की श्रेणी सापेक्ष रैंक है, निरपेक्ष स्तर नहीं, और यह प्रथम-हस्त माप भी नहीं है: यह कई प्रकाशित अध्ययनों में व्यवसाय की पर्सेंटाइल रैंकों को चार बैंडों में बांटती है। यह रोज़गार या वेतन का पूर्वानुमान नहीं है, न अपनाए जाने की संभावना, और यह स्वचालन और संवर्धन में अंतर नहीं करती।
Task-level exposure
केवल एक्सपोज़र वाले कार्य| Task | Claude.aiRaw / share % |
|---|---|
Calculate amounts of required materials and estimate costs, based on surface measurements or work orders.47-2141 | 0.002356.1 |
Fill cracks, holes, or joints with caulk, putty, plaster, or other fillers, using caulking guns or putty knives.47-2141 | 0.001843.9 |
| Not observed on any surface — 17 task(s) — These tasks have no row in the source for this release. The 0 in the share row is a display-stage composition ratio; absence is what the — in the raw row states. | |
Cover surfaces with dropcloths or masking tape and paper to protect surfaces during painting. | —0 |
Apply primers or sealers to prepare new surfaces, such as bare wood or metal, for finish coats. | —0 |
Apply paint, stain, varnish, enamel, or other finishes to equipment, buildings, bridges, or other structures, using brushes, spray guns, or rollers. | —0 |
Read work orders or receive instructions from supervisors or homeowners to determine work requirements. | —0 |
Erect scaffolding or swing gates, or set up ladders, to work above ground level. | —0 |
Remove fixtures such as pictures, door knobs, lamps, or electric switch covers prior to painting. | —0 |
Wash and treat surfaces with oil, turpentine, mildew remover, or other preparations, and sand rough spots to ensure that finishes will adhere properly. | —0 |
Mix and match colors of paint, stain, or varnish with oil or thinning and drying additives to obtain desired colors and consistencies. | —0 |
Remove old finishes by stripping, sanding, wire brushing, burning, or using water or abrasive blasting. | —0 |
Select and purchase tools or finishes for surfaces to be covered, considering durability, ease of handling, methods of application, and customers' wishes. | —0 |
Smooth surfaces, using sandpaper, scrapers, brushes, steel wool, or sanding machines. | —0 |
Polish final coats to specified finishes. | —0 |
Use special finishing techniques such as sponging, ragging, layering, or faux finishing. | —0 |
Cut stencils and brush or spray lettering or decorations on surfaces. | —0 |
Waterproof buildings, using waterproofers or caulking. | —0 |
Spray or brush hot plastics or pitch onto surfaces. | —0 |
Bake finishes on painted or enameled articles, using baking ovens. | —0 |
Values in this tab are predicted labels, not observations. Eloundou et al. (2023) published two rating regimes — human raters and GPT-4 — and the β shown here is derived from the GPT-4 rater basis alone; the same task can take a different value under the other regime. The unit and the meaning differ from the observed shares (%) in the other tabs, so do not place them on the same axis.
| Task | βE1 + 0.5 × E2 |
|---|---|
Calculate amounts of required materials and estimate costs, based on surface measurements or work orders.O*NET Task ID 11515 | 1.0 |
Cover surfaces with dropcloths or masking tape and paper to protect surfaces during painting.O*NET Task ID 11511 | 0.0 |
Fill cracks, holes, or joints with caulk, putty, plaster, or other fillers, using caulking guns or putty knives.O*NET Task ID 11512 | 0.0 |
Apply primers or sealers to prepare new surfaces, such as bare wood or metal, for finish coats.O*NET Task ID 11513 | 0.0 |
Apply paint, stain, varnish, enamel, or other finishes to equipment, buildings, bridges, or other structures, using brushes, spray guns, or rollers.O*NET Task ID 11514 | 0.0 |
Read work orders or receive instructions from supervisors or homeowners to determine work requirements.O*NET Task ID 11516 | 0.0 |
Erect scaffolding or swing gates, or set up ladders, to work above ground level.O*NET Task ID 11517 | 0.0 |
Remove fixtures such as pictures, door knobs, lamps, or electric switch covers prior to painting.O*NET Task ID 11518 | 0.0 |
Wash and treat surfaces with oil, turpentine, mildew remover, or other preparations, and sand rough spots to ensure that finishes will adhere properly.O*NET Task ID 11519 | 0.0 |
Mix and match colors of paint, stain, or varnish with oil or thinning and drying additives to obtain desired colors and consistencies.O*NET Task ID 11520 | 0.0 |
Remove old finishes by stripping, sanding, wire brushing, burning, or using water or abrasive blasting.O*NET Task ID 11521 | 0.0 |
Select and purchase tools or finishes for surfaces to be covered, considering durability, ease of handling, methods of application, and customers' wishes.O*NET Task ID 11522 | 0.0 |
Smooth surfaces, using sandpaper, scrapers, brushes, steel wool, or sanding machines.O*NET Task ID 11523 | 0.0 |
Polish final coats to specified finishes.O*NET Task ID 11524 | 0.0 |
Use special finishing techniques such as sponging, ragging, layering, or faux finishing.O*NET Task ID 11525 | 0.0 |
Waterproof buildings, using waterproofers or caulking.O*NET Task ID 11526 | 0.0 |
Cut stencils and brush or spray lettering or decorations on surfaces.O*NET Task ID 11527 | 0.0 |
Spray or brush hot plastics or pitch onto surfaces.O*NET Task ID 11528 | 0.0 |
Bake finishes on painted or enameled articles, using baking ovens.O*NET Task ID 11529 | 0.0 |
β = E1 + 0.5 × E2 · E1 = tasks where direct LLM access alone cuts time by at least 50%, E2 = tasks where software built on top of an LLM cuts time by at least 50%. Values take only 0 / 0.5 / 1.0.
Data sources & licenses — O*NET®, Anthropic Economic Index, Eloundou et al. (2023): see full notices on the Credits page
व्यावसायिक जानकारी
इस व्यवसाय से जुड़े हालिया बदलाव
मार्च 2026: निर्माण पेंटरों पर AI प्रभाव विश्लेषण ब्लॉग पोस्ट प्रकाशित (5% ऑटोमेशन जोखिम)
[स्रोत: Blog Wave 19]