टाइल और पत्थर सेटर
निर्माण, रखरखाव और मरम्मतAI एक्सपोजर
- डेटा स्रोत: BLSप्रकाशन: 2026-08
कम· सापेक्ष
कमचार सापेक्ष श्रेणियाँबहुत उच्चव्यवसाय-समूह स्तर का मान
मापक्रम, आधार और स्रोत
चार सापेक्ष बैंड (कम / मध्यम / उच्च / बहुत उच्च)
BLS रोज़गार पूर्वानुमान तालिका के 831 विस्तृत व्यवसायों के आधार पर। मान NEM (नेशनल एम्प्लॉयमेंट मैट्रिक्स) कोड के स्तर पर दिया जाता है, इसलिए एक ही NEM कोड वाले व्यवसायों को वही बैंड मिलता है
- डेटा स्रोत: Anthropicप्रकाशन: 2026-03
0.000
0.000यहाँ दिए गए मानों की सीमा0.745मापक्रम, आधार और स्रोत
- डेटा स्रोत: ILOप्रकाशन: 2025
0.10
0.09यहाँ दिए गए मानों की सीमा0.70व्यवसाय-समूह स्तर का मान
मापक्रम, आधार और स्रोत
जेनरेटिव AI एक्सपोजर सूचकांक, प्रकाशित रूप में 0–1
ISCO-08 यूनिट समूह — समान कोड वाले सभी व्यवसायों को यही मान मिलता है
यह इस साइट की गणना है, ILO द्वारा प्रकाशित आँकड़ा नहीं: इस साइट द्वारा ILO डेटासेट से जोड़े गए 1,012 व्यवसायों में से 98% इस मान के बराबर या उससे अधिक हैं।
यह स्रोत किस प्रकार का आँकड़ा प्रकाशित करता है
BLS की श्रेणी सापेक्ष रैंक है, निरपेक्ष स्तर नहीं, और यह प्रथम-हस्त माप भी नहीं है: यह कई प्रकाशित अध्ययनों में व्यवसाय की पर्सेंटाइल रैंकों को चार बैंडों में बांटती है। यह रोज़गार या वेतन का पूर्वानुमान नहीं है, न अपनाए जाने की संभावना, और यह स्वचालन और संवर्धन में अंतर नहीं करती।
Task-level exposure
केवल एक्सपोज़र वाले कार्य| Task | Claude.aiRaw / share % |
|---|---|
Study blueprints and examine surface to be covered to determine amount of material needed.47-2044 | 0.008374.4 |
Determine and implement the best layout to achieve a desired pattern.47-2044 | 0.002925.6 |
| Not observed on any surface — 23 task(s) — These tasks have no row in the source for this release. The 0 in the share row is a display-stage composition ratio; absence is what the — in the raw row states. | |
Align and straighten tile using levels, squares, and straightedges. | —0 |
Cut and shape tile to fit around obstacles and into odd spaces and corners, using hand and power cutting tools. | —0 |
Finish and dress the joints and wipe excess grout from between tiles, using damp sponge. | —0 |
Apply mortar to tile back, position the tile, and press or tap with trowel handle to affix tile to base. | —0 |
Mix, apply, and spread plaster, concrete, mortar, cement, mastic, glue or other adhesives to form a bed for the tiles, using brush, trowel and screed. | —0 |
Measure and mark surfaces to be tiled, following blueprints. | —0 |
Level concrete and allow to dry. | —0 |
Prepare surfaces for tiling by attaching lath or waterproof paper, or by applying a cement mortar coat to a metal screen. | —0 |
Cut, surface, polish, and install marble and granite or install pre-cast terrazzo, granite or marble units. | —0 |
Remove any old tile, grout and adhesive using chisels and scrapers and clean the surface carefully. | —0 |
Lay and set mosaic tiles to create decorative wall, mural, and floor designs. | —0 |
Remove and replace cracked or damaged tile. | —0 |
Mix and apply mortar or cement to edges and ends of drain tiles to seal halves and joints. | —0 |
Apply a sealer to make grout stain- and water-resistant. | —0 |
Prepare cost and labor estimates, based on calculations of time and materials needed for project. | —0 |
Build underbeds and install anchor bolts, wires, and brackets. | —0 |
Install and anchor fixtures in designated positions, using hand tools. | —0 |
Cut tile backing to required size, using shears. | —0 |
Assist customers in selection of tile and grout. | —0 |
Measure and cut metal lath to size for walls and ceilings, using tin snips. | —0 |
Select and order tile and other items to be installed, such as bathroom accessories, walls, panels, and cabinets, according to specifications. | —0 |
Spread mastic or other adhesive base on roof deck to form base for promenade tile, using serrated spreader. | —0 |
Brush glue onto manila paper on which design has been drawn and position tiles, finished side down, onto paper. | —0 |
Values in this tab are predicted labels, not observations. Eloundou et al. (2023) published two rating regimes — human raters and GPT-4 — and the β shown here is derived from the GPT-4 rater basis alone; the same task can take a different value under the other regime. The unit and the meaning differ from the observed shares (%) in the other tabs, so do not place them on the same axis.
| Task | βE1 + 0.5 × E2 |
|---|---|
Prepare cost and labor estimates, based on calculations of time and materials needed for project.O*NET Task ID 2854 | 1.0 |
Determine and implement the best layout to achieve a desired pattern.O*NET Task ID 2849 | 0.5 |
Measure and mark surfaces to be tiled, following blueprints.O*NET Task ID 2855 | 0.5 |
Study blueprints and examine surface to be covered to determine amount of material needed.O*NET Task ID 2859 | 0.5 |
Align and straighten tile using levels, squares, and straightedges.O*NET Task ID 2848 | 0.0 |
Cut and shape tile to fit around obstacles and into odd spaces and corners, using hand and power cutting tools.O*NET Task ID 2850 | 0.0 |
Finish and dress the joints and wipe excess grout from between tiles, using damp sponge.O*NET Task ID 2851 | 0.0 |
Apply mortar to tile back, position the tile, and press or tap with trowel handle to affix tile to base.O*NET Task ID 2852 | 0.0 |
Mix, apply, and spread plaster, concrete, mortar, cement, mastic, glue or other adhesives to form a bed for the tiles, using brush, trowel and screed.O*NET Task ID 2853 | 0.0 |
Level concrete and allow to dry.O*NET Task ID 2856 | 0.0 |
Build underbeds and install anchor bolts, wires, and brackets.O*NET Task ID 2857 | 0.0 |
Prepare surfaces for tiling by attaching lath or waterproof paper, or by applying a cement mortar coat to a metal screen.O*NET Task ID 2858 | 0.0 |
Cut, surface, polish, and install marble and granite or install pre-cast terrazzo, granite or marble units.O*NET Task ID 2860 | 0.0 |
Install and anchor fixtures in designated positions, using hand tools.O*NET Task ID 2861 | 0.0 |
Cut tile backing to required size, using shears.O*NET Task ID 2862 | 0.0 |
Remove any old tile, grout and adhesive using chisels and scrapers and clean the surface carefully.O*NET Task ID 2863 | 0.0 |
Lay and set mosaic tiles to create decorative wall, mural, and floor designs.O*NET Task ID 2864 | 0.0 |
Assist customers in selection of tile and grout.O*NET Task ID 2865 | 0.0 |
Remove and replace cracked or damaged tile.O*NET Task ID 2866 | 0.0 |
Measure and cut metal lath to size for walls and ceilings, using tin snips.O*NET Task ID 2867 | 0.0 |
Select and order tile and other items to be installed, such as bathroom accessories, walls, panels, and cabinets, according to specifications.O*NET Task ID 2868 | 0.0 |
Mix and apply mortar or cement to edges and ends of drain tiles to seal halves and joints.O*NET Task ID 2869 | 0.0 |
Spread mastic or other adhesive base on roof deck to form base for promenade tile, using serrated spreader.O*NET Task ID 2870 | 0.0 |
Apply a sealer to make grout stain- and water-resistant.O*NET Task ID 2871 | 0.0 |
Brush glue onto manila paper on which design has been drawn and position tiles, finished side down, onto paper.O*NET Task ID 2872 | 0.0 |
β = E1 + 0.5 × E2 · E1 = tasks where direct LLM access alone cuts time by at least 50%, E2 = tasks where software built on top of an LLM cuts time by at least 50%. Values take only 0 / 0.5 / 1.0.
Data sources & licenses — O*NET®, Anthropic Economic Index, Eloundou et al. (2023): see full notices on the Credits page