- O*NET-SOC কোড
- 47-2082.00
Seal joints between plasterboard or other wallboard to prepare wall surface for painting or papering.
- ডেটার উৎস: BLSপ্রকাশকাল: 2026-08
কম· আপেক্ষিক
কমচারটি আপেক্ষিক স্তরঅত্যন্ত উচ্চপেশা-গোষ্ঠী পর্যায়ের মান
স্কেল, ভিত্তি ও উৎস
চারটি আপেক্ষিক স্তর (কম / মাঝারি / উচ্চ / অত্যন্ত উচ্চ)
BLS কর্মসংস্থান পূর্বাভাস সারণির 831টি বিস্তারিত পেশার ভিত্তিতে। মান NEM (ন্যাশনাল এমপ্লয়মেন্ট ম্যাট্রিক্স) কোড অনুযায়ী দেওয়া হয়, তাই একই NEM কোডের পেশাগুলি একই ব্যান্ড পায়
- ডেটার উৎস: Anthropicপ্রকাশকাল: 2026-03
0.000
0.000এখানে থাকা মানগুলোর পরিসর0.745স্কেল, ভিত্তি ও উৎস
পর্যবেক্ষিত এক্সপোজার সূচক, প্রকাশিত রূপে 0–1
O*NET টাস্কে ম্যাপ করা
SOC 2018 পেশা স্তরে প্রকাশিত; একই SOC 2018 কোডের প্রতিটি O*NET পেশা এই মান পায়
- ডেটার উৎস: ILOপ্রকাশকাল: 2025
0.11
0.09এখানে থাকা মানগুলোর পরিসর0.70পেশা-গোষ্ঠী পর্যায়ের মান
স্কেল, ভিত্তি ও উৎস
জেনারেটিভ AI এক্সপোজার সূচক, প্রকাশিত রূপে 0–1
ISCO-08 ইউনিট গ্রুপ স্তরে প্রকাশিত মান। মার্কিন শ্রম পরিসংখ্যান ব্যুরো (BLS)-এর সরকারি ক্রসওয়াক (ISCO-08 থেকে 2010 SOC, 2010 SOC থেকে 2018 SOC) প্রকাশিত রূপেই প্রয়োগ করে এই পেশার সঙ্গে যুক্ত করা হয়েছে; মিল সম্পূর্ণ বা আংশিক
এই উৎস কী ধরনের মান প্রকাশ করে
BLS-এর শ্রেণিবিভাগ একটি আপেক্ষিক র্যাঙ্ক, পরম মাত্রা নয়, এবং এটি সরাসরি পরিমাপও নয়: এটি কয়েকটি প্রকাশিত গবেষণায় পাওয়া পেশার পার্সেন্টাইল র্যাঙ্কগুলিকে চারটি স্তরে ভাগ করে। এটি কর্মসংস্থান বা মজুরির পূর্বাভাস নয়, গ্রহণের সম্ভাবনাও নয়, এবং এটি স্বয়ংক্রিয়তা ও সম্প্রসারণের মধ্যে পার্থক্য করে না।
Task-level exposure
শুধু এক্সপোজার থাকা কাজ16 মূল্যায়িত কার্য · β ≥ 0.5 থাকা 0 কার্য (0.0%)
β = সরাসরি এক্সপোজার (E1) + 0.5 × সরঞ্জাম উপলব্ধ থাকলে এক্সপোজার (E2), উৎস রিপোজিটরির সংজ্ঞা অনুসারে।
- উৎস একক: O*NET 27.2-এর কাজ → O*NET 31.0-এর পেশা কোড
- মূল্যায়িত সব কাজ O*NET 31.0-এর কাজের তালিকায় আছে।
- উৎস
- OpenAI "GPTs are GPTs" exposure rubric
- সংস্করণ
- gh-main-0471612
- লাইসেন্স
- MIT License, Copyright (c) 2024 OpenAI
| Task (O*NET 20.1) | Claude.aiRaw / share % |
|---|---|
Check adhesives to ensure that they will work and will remain durable.47-2082.00 | 0.0015100.0 |
| Not observed on any surface — 15 task(s) — These tasks have no row in the source for this release. The 0 in the share row is a display-stage composition ratio; absence is what the — in the raw row states. | |
Remove extra compound after surfaces have been covered sufficiently. | —0 |
Spread sealing compound between boards or panels or over cracks, holes, nail heads, or screw heads, using trowels, broadknives, or spatulas. | —0 |
Press paper tape over joints to embed tape into sealing compound and to seal joints. | —0 |
Mix sealing compounds by hand or with portable electric mixers. | —0 |
Spread and smooth cementing material over tape, using trowels or floating machines to blend joints with wall surfaces. | —0 |
Seal joints between plasterboard or other wallboard to prepare wall surfaces for painting or papering. | —0 |
Sand or patch nicks or cracks in plasterboard or wallboard. | —0 |
Use mechanical applicators that spread compounds and embed tape in one operation. | —0 |
Apply additional coats to fill in holes and make surfaces smooth. | —0 |
Install metal molding at wall corners to secure wallboard. | —0 |
Sand rough spots of dried cement between applications of compounds. | —0 |
Countersink nails or screws below surfaces of walls before applying sealing compounds, using hammers or screwdrivers. | —0 |
Select the correct sealing compound or tape. | —0 |
Apply texturizing compounds or primers to walls or ceilings before final finishing, using trowels, brushes, rollers, or spray guns. | —0 |
Work on high ceilings using scaffolding or other tools, such as stilts. | —0 |
Values in this tab are predicted labels, not observations. Eloundou et al. (2023) published two rating regimes — human raters and GPT-4 — and the β shown here is derived from the GPT-4 rater basis alone; the same task can take a different value under the other regime. The unit and the meaning differ from the observed shares (%) in the other tabs, so do not place them on the same axis.
| Task (O*NET 27.2) | βE1 + 0.5 × E2 |
|---|---|
Remove extra compound after surfaces have been covered sufficiently.O*NET Task ID 13529 | 0.0 |
Spread sealing compound between boards or panels or over cracks, holes, nail heads, or screw heads, using trowels, broadknives, or spatulas.O*NET Task ID 13530 | 0.0 |
Press paper tape over joints to embed tape into sealing compound and to seal joints.O*NET Task ID 13531 | 0.0 |
Mix sealing compounds by hand or with portable electric mixers.O*NET Task ID 13532 | 0.0 |
Spread and smooth cementing material over tape, using trowels or floating machines to blend joints with wall surfaces.O*NET Task ID 13533 | 0.0 |
Seal joints between plasterboard or other wallboard to prepare wall surfaces for painting or papering.O*NET Task ID 13534 | 0.0 |
Sand or patch nicks or cracks in plasterboard or wallboard.O*NET Task ID 13535 | 0.0 |
Use mechanical applicators that spread compounds and embed tape in one operation.O*NET Task ID 13536 | 0.0 |
Apply additional coats to fill in holes and make surfaces smooth.O*NET Task ID 13537 | 0.0 |
Install metal molding at wall corners to secure wallboard.O*NET Task ID 13538 | 0.0 |
Sand rough spots of dried cement between applications of compounds.O*NET Task ID 13539 | 0.0 |
Countersink nails or screws below surfaces of walls before applying sealing compounds, using hammers or screwdrivers.O*NET Task ID 13540 | 0.0 |
Select the correct sealing compound or tape.O*NET Task ID 13541 | 0.0 |
Apply texturizing compounds or primers to walls or ceilings before final finishing, using trowels, brushes, rollers, or spray guns.O*NET Task ID 13542 | 0.0 |
Check adhesives to ensure that they will work and will remain durable.O*NET Task ID 13543 | 0.0 |
Work on high ceilings, using scaffolding or other tools, such as stilts.O*NET Task ID 20788 | 0.0 |
β = E1 + 0.5 × E2 · E1 = tasks where direct LLM access alone cuts time by at least 50%, E2 = tasks where software built on top of an LLM cuts time by at least 50%. Values take only 0 / 0.5 / 1.0.
Data sources & licenses — O*NET®, Anthropic Economic Index, Eloundou et al. (2023): see full notices on the Credits page
O*NET 31.0-এর সব কাজ (16টি)
এই পেশার O*NET 31.0-এর সব কাজ (ইংরেজি, প্রকাশিত রূপে; কাজের ধরন মূল বা সম্পূরক)। এক্সপোজার-মান এই তালিকায় নেই; সেগুলো উপরের টেবিলে, প্রতিটি সূত্র যে O*NET সংস্করণ ব্যবহার করেছে তার ভাষ্যের পাশে রয়েছে।
| কাজ (O*NET 31.0) | ধরন |
|---|---|
| Remove extra compound after surfaces have been covered sufficiently. | মূল |
| Spread sealing compound between boards or panels or over cracks, holes, nail heads, or screw heads, using trowels, broadknives, or spatulas. | মূল |
| Press paper tape over joints to embed tape into sealing compound and to seal joints. | মূল |
| Mix sealing compounds by hand or with portable electric mixers. | মূল |
| Spread and smooth cementing material over tape, using trowels or floating machines to blend joints with wall surfaces. | মূল |
| Seal joints between plasterboard or other wallboard to prepare wall surfaces for painting or papering. | মূল |
| Sand or patch nicks or cracks in plasterboard or wallboard. | মূল |
| Use mechanical applicators that spread compounds and embed tape in one operation. | মূল |
| Apply additional coats to fill in holes and make surfaces smooth. | মূল |
| Install metal molding at wall corners to secure wallboard. | মূল |
| Sand rough spots of dried cement between applications of compounds. | মূল |
| Countersink nails or screws below surfaces of walls before applying sealing compounds, using hammers or screwdrivers. | মূল |
| Select the correct sealing compound or tape. | মূল |
| Apply texturizing compounds or primers to walls or ceilings before final finishing, using trowels, brushes, rollers, or spray guns. | মূল |
| Check adhesives to ensure that they will work and will remain durable. | মূল |
| Work on high ceilings, using scaffolding or other tools, such as stilts. | মূল |
1.59/ 3· রোবট এক্সপোজার সূচক
স্কেল, ভিত্তি ও উৎস
প্রতিটি শারীরিক কাজকে 0–3 গ্রেড দেওয়া হয়েছে এই ভিত্তিতে যে ইতিমধ্যে মোতায়েন, বিক্রি বা প্রদর্শিত রোবট কোন পরিবেশে সেটি করতে পারে (0 নেই · 1 রোবটের জন্য তৈরি পরিবেশ, যেমন বেড়া-ঘেরা মেশিন সেল বা বোতলজাতকরণ লাইন · 2 সংগঠিত সুবিধা, যেমন হাসপাতালের ফার্মেসি বা কনটেইনার বন্দর · 3 অসংগঠিত পরিবেশ, যেমন ব্যক্তিগত বাড়ি বা নির্মাণস্থল), এবং কাজের সময়ের অংশ অনুযায়ী গ্রেডগুলোর গড় নেওয়া হয়েছে
এই পেশার O*NET 29.3 কাজগুলোর মধ্যে শারীরিক কাজ
গ্রেড ও সময়ের অংশ Anthropic Claude Opus 5 (ওয়েব অনুসন্ধান) দিয়ে অনুমান করেছে (2026 অনুযায়ী)।
রোবট এক্সপোজার সূচক এই সাইটের AI এক্সপোজার পরিসংখ্যান থেকে আলাদা একটি পরিমাপ, তাই এটিকে সেগুলোর সঙ্গে যোগ বা তুলনা করা যায় না। এটি প্রকৃত গ্রহণ বা খরচ পরিমাপ করে না, এবং 0-এর মধ্যে এমন পেশাও আছে যেগুলোতে কোনো শারীরিক কাজ নেই।
প্রতিটি শারীরিক কাজের গ্রেড
রোবট পরিবেশ স্তর (E0–E3)
E0 নেইবিস্তারিত
মোতায়েন, বিক্রি বা প্রদর্শিত রোবট দিয়ে, রোবটের জন্য তৈরি পরিবেশেও, করা যায় না বলে মূল্যায়িত
E1 রোবটের জন্য তৈরি পরিবেশবিস্তারিত
যন্ত্রকে ঘিরে তৈরি পরিবেশে, যেমন বেড়া-ঘেরা মেশিন সেল বা বোতলজাতকরণ লাইনে, করা যায় বলে মূল্যায়িত
E2 সংগঠিত সুবিধাবিস্তারিত
কোনো প্রতিষ্ঠান কাজের মান বজায় রাখে এমন মানুষের কর্মস্থলে, যেমন হাসপাতালের ফার্মেসি বা কনটেইনার বন্দরে, করা যায় বলে মূল্যায়িত
E3 অসংগঠিত পরিবেশবিস্তারিত
কোনো প্রতিষ্ঠান কাজের মান বজায় রাখে না এমন পরিবেশে, যেমন ব্যক্তিগত বাড়ি বা নির্মাণস্থলে, করা যায় বলে মূল্যায়িত
শুধু শারীরিক হিসেবে শ্রেণিবদ্ধ কাজগুলো তালিকাভুক্ত; অন্য কাজগুলোর উৎসে কোনো স্তর নেই।
| কাজ (O*NET 29.3) | রোবট পরিবেশ স্তর |
|---|---|
| Remove extra compound after surfaces have been covered sufficiently. | E3 অসংগঠিত পরিবেশ |
| Spread sealing compound between boards or panels or over cracks, holes, nail heads, or screw heads, using trowels, broadknives, or spatulas. | E1 রোবটের জন্য তৈরি পরিবেশ |
| Press paper tape over joints to embed tape into sealing compound and to seal joints. | E0 নেই |
| Mix sealing compounds by hand or with portable electric mixers. | E1 রোবটের জন্য তৈরি পরিবেশ |
| Spread and smooth cementing material over tape, using trowels or floating machines to blend joints with wall surfaces. | E3 অসংগঠিত পরিবেশ |
| Seal joints between plasterboard or other wallboard to prepare wall surfaces for painting or papering. | E0 নেই |
| Sand or patch nicks or cracks in plasterboard or wallboard. | E2 সংগঠিত সুবিধা |
| Use mechanical applicators that spread compounds and embed tape in one operation. | E0 নেই |
| Apply additional coats to fill in holes and make surfaces smooth. | E3 অসংগঠিত পরিবেশ |
| Install metal molding at wall corners to secure wallboard. | E1 রোবটের জন্য তৈরি পরিবেশ |
| Sand rough spots of dried cement between applications of compounds. | E3 অসংগঠিত পরিবেশ |
| Countersink nails or screws below surfaces of walls before applying sealing compounds, using hammers or screwdrivers. | E1 রোবটের জন্য তৈরি পরিবেশ |
| Apply texturizing compounds or primers to walls or ceilings before final finishing, using trowels, brushes, rollers, or spray guns. | E3 অসংগঠিত পরিবেশ |
| Check adhesives to ensure that they will work and will remain durable. | E1 রোবটের জন্য তৈরি পরিবেশ |
| Work on high ceilings, using scaffolding or other tools, such as stilts. | E0 নেই |
পেশাগত তথ্য
কর্মসংস্থানের পূর্বাভাস (BLS)
- কর্মসংস্থান, 2025
- 16K
- প্রক্ষেপিত কর্মসংস্থান, 2035
- 16K
- পরিবর্তন (2025–35)
- -1.6%
- মধ্যমা বার্ষিক মজুরি, 2025
- $68,270
- প্রবেশের জন্য সাধারণত প্রয়োজনীয় শিক্ষা
- No formal educational credential
কোরীয় শ্রেণিবিন্যাসের সঙ্গে সংযোগ (KSCO)
AI Changing Work-এর তৈরি Korea Occupation Direct Crosswalk v1.1-এর বর্তমান সংস্করণের সংযোগ। সম্পর্ক-মান O*NET-SOC পেশার দিক থেকে পড়া হয়।
| KSCO কোড | KSCO নাম | সম্পর্ক | অবস্থা |
|---|---|---|---|
| 78120 | 경량 철골공 | এই পেশা বেশি সংকীর্ণ | নিশ্চিত |
সম্পর্ক ও অবস্থার সংজ্ঞা(kr-direct v1.1)
আইএলও পেশাগত বিবরণ
নিচের ISCO-08 একক গোষ্ঠীগুলোকে AI Changing Work মার্কিন শ্রম পরিসংখ্যান ব্যুরো (BLS)-এর প্রকাশিত ক্রসওয়াক (2018 SOC থেকে 2010 SOC, 2010 SOC থেকে ISCO-08) কোনো ক্ষেত্রভিত্তিক বাছাই ছাড়া প্রকাশিত রূপেই প্রয়োগ করে এই পেশার সঙ্গে যুক্ত করেছে; প্রতিটি সংযোগ পূর্ণ বা আংশিক হতে পারে।
- ISCO-08 7123Plasterers
প্লাষ্টার মিস্ত্রি
উৎস: বাংলা পেশার নামসমূহ বাংলাদেশ পরিসংখ্যান ব্যুরো (বিবিএস) প্রকাশিত 'বাংলাদেশ পেশাগত শ্রেণিবিন্যাস (বিএসসিও)-২০২০, ভলিউম-২' থেকে অপরিবর্তিতভাবে উদ্ধৃত। উৎস: https://bbs.gov.bd/pages/static-pages/6922dce2933eb65569e128ee । বিএসসিও-২০২০ আইএলও-এর আইএসসিও-০৮ এর ভিত্তিতে প্রণীত। এই উপস্থাপনা বিবিএস বা আইএলও কর্তৃক প্রস্তুত, পর্যালোচিত বা অনুমোদিত নয়।
নিচের সংজ্ঞা, কাজ ও উদাহরণ ওই একক গোষ্ঠী সম্পর্কে ILO-র বর্ণনা, এই পেশা সম্পর্কে নয়।
Plasterers install, maintain and repair plasterboard in buildings, and apply decorative and protective coverings of plaster, cement and similar material to the interiors and exteriors of structures.
কার্য
- (a) applying one or more coats of plaster to interior walls and ceilings of buildings to produce finished surface;
- (b) measuring, marking and installing ornamental plaster panels, and casting and trimming ornamental plaster cornices;
- (c) measuring, marking and cutting plasterboard, lifting and positioning panels and securing them to walls, ceilings and battens;
- (d) covering joins and nail holes with wet plaster and sealing compounds, and smoothing them using wet brushes and sand paper;
- (e) applying protective and decorative covering of cement, plaster and similar materials to exterior building surfaces;
- (f) making and installing decorative plaster fixtures of fibrous plaster;
- (g) applying and finishing acoustic, insulating and fireproofing materials bonded with plaster, plastic cement and similar materials.
উদাহরণ পেশা
Dry wall plasterer · Fibrous plasterer · Ornamental plasterer · Plasterer · Solid plasterer · Stucco plasterer
Sources: ILO ISCO-08 — details: Credits
ESCO পেশাগত শব্দভাণ্ডার
ISCO-08 7123
- ceiling installerESCO 7123.1
Ceiling installers install ceilings in buildings. They apply different techniques as the situation requires - for example when fire resistance is especially important, or when space is needed between the dropped ceiling and the next floor - or specialise in one.
- plastererESCO 7123.2
Plasterers apply plaster made from gypsum, cement or other solutions to walls as a smooth finish. They mix dry plaster powder with water, then smear the resulting paste onto a wall. The plaster is then smoothed before it hardens and forms a solid coating on the wall.
এগুলো সেই ESCO পেশা যেগুলোকে ESCO ওপরে যুক্ত ISCO-08 একক গোষ্ঠীগুলোর অধীনে শ্রেণিবদ্ধ করে; এগুলো এই পেশার সঙ্গে একটি একটি করে মেলানো হয়নি।
উৎস: European Commission, DG EMPL — ESCO API 2026-08-08 (bridge v1.2.1)
লাইসেন্স: CC BY 4.0 (EU Reuse Notice)
ESCO reuse terms and the modification notice are in Credits.
ফরাসি শ্রেণিবিন্যাসের সঙ্গে সংযোগ (ROME)
এই পেশা ও ROME 4.0 পেশা-প্রোফাইলের মধ্যে সংযোগ, যা AI Changing Work এআই মডেলের সাহায্যে নির্ধারণ করেছে। সম্পর্কগুলো এই পেশার দিক থেকে পড়তে হবে। ‘অস্থায়ী’ চিহ্নিত সংযোগগুলো কেবল একই মডেল পরিবারের (Claude) দুই বিচারকের বিচারের ভিত্তিতে, বা সেই বিচারের ওপর পরিচালকের নিয়ম প্রয়োগ করে গৃহীত হয়েছে, তাই এগুলো নিশ্চিত সংযোগের তুলনায় দুর্বল প্রমাণের ওপর দাঁড়িয়ে আছে।
| ROME কোড | ROME নাম (ফরাসি) | সম্পর্ক |
|---|---|---|
| F1604 | Plaquiste | এই পেশা বেশি সংকীর্ণ |
| F1606 | Peintre en bâtiment | সম্পর্কিত, সমতুল্য নয় |
Source: France Travail — Répertoire Opérationnel des Métiers et des Emplois (ROME 4.0), version 61, last updated 15 June 2026 (https://www.data.gouv.fr/datasets/repertoire-operationnel-des-metiers-et-des-emplois-rome). Licence Ouverte 2.0.
ROME codes and titles are reproduced unchanged; the links to O*NET-SOC occupations are AI Changing Work's own judgment and are not a France Travail correspondence.
(AI Changing Work link release: fr-direct v1)
স্প্যানিশ শ্রেণিবিন্যাসের সঙ্গে সংযোগ (CNO-11)
এই পেশা ও CNO-11 পেশার মধ্যে সংযোগ, যা AI Changing Work এআই মডেলের সাহায্যে নির্ধারণ করেছে। সম্পর্কগুলো এই পেশার দিক থেকে পড়তে হবে।
| CNO-11 কোড | CNO-11 নাম (স্প্যানিশ) | সম্পর্ক |
|---|---|---|
| 7199 | Otros trabajadores de las obras estructurales de construcción no clasificados bajo otros epígrafes | এই পেশা বেশি সংকীর্ণঅস্থায়ী |
| 7212 | Aplicadores de revestimientos de pasta y mortero | সম্পর্কিত, সমতুল্য নয় |
Source: Instituto Nacional de Estadística (INE), National Classification of Occupations 2011 (CNO-11, Royal Decree 1591/2010) — www.ine.es · Licensed CC BY 4.0. CNO-11 codes and Spanish titles are reproduced unchanged; the links to O*NET occupations are AI Changing Work's own judgment and are not an INE correspondence.
(AI Changing Work link release: es-direct v1)
জার্মান শ্রেণিবিন্যাসের সঙ্গে সংযোগ (KldB)
এই পেশা ও KldB পেশার মধ্যে সংযোগ, যা AI Changing Work এআই মডেলের সাহায্যে নির্ধারণ করেছে। সম্পর্কগুলো এই পেশার দিক থেকে পড়তে হবে।
| KldB কোড | KldB নাম (জার্মান) | সম্পর্ক |
|---|---|---|
| 33302 | Berufe im Aus- und Trockenbau (ohne Spezialisierung) - fachlich ausgerichtete Tätigkeiten | এই পেশা বেশি সংকীর্ণ |
Source: © Statistik der Bundesagentur für Arbeit — Klassifikation der Berufe 2010 – überarbeitete Fassung 2020, https://statistik.arbeitsagentur.de. KldB codes and titles are reproduced unchanged; the links to O*NET occupations are AI Changing Work's own mapping (eigene Zuordnung) and are not a Bundesagentur für Arbeit correspondence.
(AI Changing Work link release: de-direct v1)
জাপানি শ্রেণিবিন্যাসের সঙ্গে সংযোগ (JSCO)
এই পেশা ও JSCO পেশার মধ্যে সংযোগ, যা AI Changing Work এআই মডেলের সাহায্যে নির্ধারণ করেছে। সম্পর্কগুলো এই পেশার দিক থেকে পড়তে হবে।
| JSCO কোড | JSCO নাম (জাপানি) | সম্পর্ক |
|---|---|---|
| 669 | その他の建設従事者 | এই পেশা বেশি সংকীর্ণ |
| 664 | 左官 | সম্পর্কিত, সমতুল্য নয় |
Source: Ministry of Internal Affairs and Communications (MIC), Japan Standard Occupational Classification (Dec. 2009, MIC Notification No. 555). JSCO codes and Japanese titles are reproduced unchanged; the links to O*NET occupations are AI Changing Work's own judgment and are not a MIC correspondence.
(AI Changing Work link release: jp-direct v1)
এই পৃষ্ঠার ডেটার সূত্র, লাইসেন্স এবং AI Changing Work-এর পরিবর্তন ও অনুবাদ-বিজ্ঞপ্তি: ক্রেডিট ও সূত্র