ইটের রাজমিস্ত্রি
নির্মাণ, রক্ষণাবেক্ষণ ও মেরামতAI এক্সপোজার
- ডেটার উৎস: BLSপ্রকাশকাল: 2026-08
কম· আপেক্ষিক
কমচারটি আপেক্ষিক স্তরঅত্যন্ত উচ্চপেশা-গোষ্ঠী পর্যায়ের মান
স্কেল, ভিত্তি ও উৎস
চারটি আপেক্ষিক স্তর (কম / মাঝারি / উচ্চ / অত্যন্ত উচ্চ)
BLS কর্মসংস্থান পূর্বাভাস সারণির 831টি বিস্তারিত পেশার ভিত্তিতে। মান NEM (ন্যাশনাল এমপ্লয়মেন্ট ম্যাট্রিক্স) কোড অনুযায়ী দেওয়া হয়, তাই একই NEM কোডের পেশাগুলি একই ব্যান্ড পায়
- ডেটার উৎস: Anthropicপ্রকাশকাল: 2026-03
0.000
0.000এখানে থাকা মানগুলোর পরিসর0.745স্কেল, ভিত্তি ও উৎস
- ডেটার উৎস: ILOপ্রকাশকাল: 2025
0.09
0.09এখানে থাকা মানগুলোর পরিসর0.70পেশা-গোষ্ঠী পর্যায়ের মান
স্কেল, ভিত্তি ও উৎস
জেনারেটিভ AI এক্সপোজার সূচক, প্রকাশিত রূপে 0–1
ISCO-08 ইউনিট গ্রুপ — একই কোডের সব পেশা এই মানই পায়
এটি এই সাইটের হিসাব, ILO-এর প্রকাশিত সংখ্যা নয়: এই সাইট ILO ডেটাসেটের সঙ্গে যুক্ত করা ১,০১২টি পেশার মধ্যে 100% এই মানের সমান বা তার বেশি।
এই উৎস কী ধরনের মান প্রকাশ করে
BLS-এর শ্রেণিবিভাগ একটি আপেক্ষিক র্যাঙ্ক, পরম মাত্রা নয়, এবং এটি সরাসরি পরিমাপও নয়: এটি কয়েকটি প্রকাশিত গবেষণায় পাওয়া পেশার পার্সেন্টাইল র্যাঙ্কগুলিকে চারটি স্তরে ভাগ করে। এটি কর্মসংস্থান বা মজুরির পূর্বাভাস নয়, গ্রহণের সম্ভাবনাও নয়, এবং এটি স্বয়ংক্রিয়তা ও সম্প্রসারণের মধ্যে পার্থক্য করে না।
Task-level exposure
শুধু এক্সপোজার থাকা কাজValues in this tab are predicted labels, not observations. Eloundou et al. (2023) published two rating regimes — human raters and GPT-4 — and the β shown here is derived from the GPT-4 rater basis alone; the same task can take a different value under the other regime. The unit and the meaning differ from the observed shares (%) in the other tabs, so do not place them on the same axis.
| Task | βE1 + 0.5 × E2 |
|---|---|
Interpret blueprints and drawings to determine specifications and to calculate the materials required.O*NET Task ID 4774 | 0.5 |
Construct corners by fastening in plumb position a corner pole or building a corner pyramid of bricks, and filling in between the corners using a line from corner to corner to guide each course, or layer, of brick.O*NET Task ID 4768 | 0.0 |
Measure distance from reference points and mark guidelines to lay out work, using plumb bobs and levels.O*NET Task ID 4769 | 0.0 |
Calculate angles and courses and determine vertical and horizontal alignment of courses.O*NET Task ID 4770 | 0.0 |
Fasten or fuse brick or other building material to structure with wire clamps, anchor holes, torch, or cement.O*NET Task ID 4771 | 0.0 |
Break or cut bricks, tiles, or blocks to size, using trowel edge, hammer, or power saw.O*NET Task ID 4772 | 0.0 |
Remove excess mortar with trowels and hand tools, and finish mortar joints with jointing tools, for a sealed, uniform appearance.O*NET Task ID 4773 | 0.0 |
Apply and smooth mortar or other mixture over work surface.O*NET Task ID 4775 | 0.0 |
Mix specified amounts of sand, clay, dirt, or mortar powder with water to form refractory mixtures.O*NET Task ID 4776 | 0.0 |
Examine brickwork or structure to determine need for repair.O*NET Task ID 4777 | 0.0 |
Clean working surface to remove scale, dust, soot, or chips of brick and mortar, using broom, wire brush, or scraper.O*NET Task ID 4778 | 0.0 |
Lay and align bricks, blocks, or tiles to build or repair structures or high temperature equipment, such as cupola, kilns, ovens, or furnaces.O*NET Task ID 4779 | 0.0 |
Remove burned or damaged brick or mortar, using sledgehammer, crowbar, chipping gun, or chisel.O*NET Task ID 4780 | 0.0 |
Spray or spread refractory material over brickwork to protect against deterioration.O*NET Task ID 4781 | 0.0 |
β = E1 + 0.5 × E2 · E1 = tasks where direct LLM access alone cuts time by at least 50%, E2 = tasks where software built on top of an LLM cuts time by at least 50%. Values take only 0 / 0.5 / 1.0.
Data sources & licenses — O*NET®, Eloundou et al. (2023): see full notices on the Credits page