টেপার

নির্মাণ, রক্ষণাবেক্ষণ ও মেরামত

AI এক্সপোজার

  • ডেটার উৎস: BLSপ্রকাশকাল: 2026-08

    কম· আপেক্ষিক

    কমচারটি আপেক্ষিক স্তরঅত্যন্ত উচ্চ

    পেশা-গোষ্ঠী পর্যায়ের মান

    স্কেল, ভিত্তি ও উৎস

    চারটি আপেক্ষিক স্তর (কম / মাঝারি / উচ্চ / অত্যন্ত উচ্চ)

    BLS কর্মসংস্থান পূর্বাভাস সারণির 831টি বিস্তারিত পেশার ভিত্তিতে। মান NEM (ন্যাশনাল এমপ্লয়মেন্ট ম্যাট্রিক্স) কোড অনুযায়ী দেওয়া হয়, তাই একই NEM কোডের পেশাগুলি একই ব্যান্ড পায়

    উৎস ডেটাসেট (XLSX ফাইল ডাউনলোড)

  • ডেটার উৎস: Anthropicপ্রকাশকাল: 2026-03

    0.000

    0.000এখানে থাকা মানগুলোর পরিসর0.745
    স্কেল, ভিত্তি ও উৎস

    পর্যবেক্ষিত এক্সপোজার সূচক, প্রকাশিত রূপে 0–1

    O*NET টাস্কে ম্যাপ করা

    উৎস ডেটাসেট

  • ডেটার উৎস: ILOপ্রকাশকাল: 2025

    0.11

    0.09এখানে থাকা মানগুলোর পরিসর0.70

    পেশা-গোষ্ঠী পর্যায়ের মান

    স্কেল, ভিত্তি ও উৎস

    জেনারেটিভ AI এক্সপোজার সূচক, প্রকাশিত রূপে 0–1

    ISCO-08 ইউনিট গ্রুপ — একই কোডের সব পেশা এই মানই পায়

    এটি এই সাইটের হিসাব, ILO-এর প্রকাশিত সংখ্যা নয়: এই সাইট ILO ডেটাসেটের সঙ্গে যুক্ত করা ১,০১২টি পেশার মধ্যে 98% এই মানের সমান বা তার বেশি।

    উৎস ডেটাসেট

এই উৎস কী ধরনের মান প্রকাশ করে

BLS-এর শ্রেণিবিভাগ একটি আপেক্ষিক র্যাঙ্ক, পরম মাত্রা নয়, এবং এটি সরাসরি পরিমাপও নয়: এটি কয়েকটি প্রকাশিত গবেষণায় পাওয়া পেশার পার্সেন্টাইল র্যাঙ্কগুলিকে চারটি স্তরে ভাগ করে। এটি কর্মসংস্থান বা মজুরির পূর্বাভাস নয়, গ্রহণের সম্ভাবনাও নয়, এবং এটি স্বয়ংক্রিয়তা ও সম্প্রসারণের মধ্যে পার্থক্য করে না।

Task-level exposure

Values in this tab are predicted labels, not observations. Eloundou et al. (2023) published two rating regimes — human raters and GPT-4 — and the β shown here is derived from the GPT-4 rater basis alone; the same task can take a different value under the other regime. The unit and the meaning differ from the observed shares (%) in the other tabs, so do not place them on the same axis.

TaskβE1 + 0.5 × E2
Remove extra compound after surfaces have been covered sufficiently.

O*NET Task ID 13529

0.0
Spread sealing compound between boards or panels or over cracks, holes, nail heads, or screw heads, using trowels, broadknives, or spatulas.

O*NET Task ID 13530

0.0
Press paper tape over joints to embed tape into sealing compound and to seal joints.

O*NET Task ID 13531

0.0
Mix sealing compounds by hand or with portable electric mixers.

O*NET Task ID 13532

0.0
Spread and smooth cementing material over tape, using trowels or floating machines to blend joints with wall surfaces.

O*NET Task ID 13533

0.0
Seal joints between plasterboard or other wallboard to prepare wall surfaces for painting or papering.

O*NET Task ID 13534

0.0
Sand or patch nicks or cracks in plasterboard or wallboard.

O*NET Task ID 13535

0.0
Use mechanical applicators that spread compounds and embed tape in one operation.

O*NET Task ID 13536

0.0
Apply additional coats to fill in holes and make surfaces smooth.

O*NET Task ID 13537

0.0
Install metal molding at wall corners to secure wallboard.

O*NET Task ID 13538

0.0
Sand rough spots of dried cement between applications of compounds.

O*NET Task ID 13539

0.0
Countersink nails or screws below surfaces of walls before applying sealing compounds, using hammers or screwdrivers.

O*NET Task ID 13540

0.0
Select the correct sealing compound or tape.

O*NET Task ID 13541

0.0
Apply texturizing compounds or primers to walls or ceilings before final finishing, using trowels, brushes, rollers, or spray guns.

O*NET Task ID 13542

0.0
Check adhesives to ensure that they will work and will remain durable.

O*NET Task ID 13543

0.0
Work on high ceilings, using scaffolding or other tools, such as stilts.

O*NET Task ID 20788

0.0

β = E1 + 0.5 × E2 · E1 = tasks where direct LLM access alone cuts time by at least 50%, E2 = tasks where software built on top of an LLM cuts time by at least 50%. Values take only 0 / 0.5 / 1.0.

Data sources & licenses — O*NET®, Eloundou et al. (2023): see full notices on the Credits page

পেশাগত তথ্য