O*NET-SOC कोड
49-9099.01

Perform technical activities at power plants or individual installations necessary for the generation of power from geothermal energy sources. Monitor and control operating activities at geothermal power generation facilities and perform maintenance and repairs as necessary. Install, test, and maintain residential and commercial geothermal heat pumps.

  • डेटा स्रोत: BLSप्रकाशन: 2026-08

    मध्यम· सापेक्ष

    कमचार सापेक्ष श्रेणियाँबहुत उच्च

    व्यवसाय-समूह स्तर का मान

    मापक्रम, आधार और स्रोत

    चार सापेक्ष बैंड (कम / मध्यम / उच्च / बहुत उच्च)

    BLS रोज़गार पूर्वानुमान तालिका के 831 विस्तृत व्यवसायों के आधार पर। मान NEM (नेशनल एम्प्लॉयमेंट मैट्रिक्स) कोड के स्तर पर दिया जाता है, इसलिए एक ही NEM कोड वाले व्यवसायों को वही बैंड मिलता है

    स्रोत डेटासेट (XLSX फ़ाइल डाउनलोड)

  • डेटा स्रोत: Anthropicप्रकाशन: 2026-03

    0.000

    0.000यहाँ दिए गए मानों की सीमा0.745

    व्यवसाय-समूह स्तर का मान

    मापक्रम, आधार और स्रोत

    प्रेक्षित एक्सपोजर सूचकांक, प्रकाशित रूप में 0–1

    O*NET कार्यों पर मैप किया गया

    SOC 2018 व्यवसाय के स्तर पर प्रकाशित; समान SOC 2018 कोड वाले हर O*NET व्यवसाय को यही मान मिलता है

    स्रोत डेटासेट (CSV फ़ाइल डाउनलोड)

  • डेटा स्रोत: ILOप्रकाशन: 2025

    0.11–0.12· 2 ISCO-08 समूह

    मापक्रम, आधार और स्रोत

    जेनरेटिव AI एक्सपोजर सूचकांक, प्रकाशित रूप में 0–1

    ISCO-08 इकाई समूह के स्तर पर प्रकाशित मान। अमेरिकी श्रम सांख्यिकी ब्यूरो (BLS) की आधिकारिक क्रॉसवॉक तालिकाओं (ISCO-08 से 2010 SOC, 2010 SOC से 2018 SOC) को प्रकाशित रूप में लागू करके इस व्यवसाय से जोड़ा गया है; यह मिलान पूर्ण या आंशिक है

    स्रोत डेटासेट (PDF फ़ाइल डाउनलोड)

यह स्रोत किस प्रकार का आँकड़ा प्रकाशित करता है

BLS की श्रेणी सापेक्ष रैंक है, निरपेक्ष स्तर नहीं, और यह प्रथम-हस्त माप भी नहीं है: यह कई प्रकाशित अध्ययनों में व्यवसाय की पर्सेंटाइल रैंकों को चार बैंडों में बांटती है। यह रोज़गार या वेतन का पूर्वानुमान नहीं है, न अपनाए जाने की संभावना, और यह स्वचालन और संवर्धन में अंतर नहीं करती।

जुड़े प्रत्येक ISCO-08 समूह का ILO मान
  • ISCO-08 7533Sewing, Embroidery and Related Workers0.12
  • ISCO-08 9622Odd Job Persons0.11

24 मूल्यांकित कार्य · β ≥ 0.5 वाले 7 कार्य (29.2%)

β = प्रत्यक्ष एक्सपोजर (E1) + 0.5 × उपकरण उपलब्ध होने पर एक्सपोजर (E2), स्रोत रिपॉजिटरी की परिभाषा के अनुसार।

  • स्रोत इकाई: O*NET 27.2 के कार्य → O*NET 31.0 का पेशा कोड
  • सभी मूल्यांकित कार्य O*NET 31.0 की कार्य-सूची में हैं।
स्रोत
OpenAI "GPTs are GPTs" exposure rubric
संस्करण
gh-main-0471612
लाइसेंस
MIT License, Copyright (c) 2024 OpenAI
Task (O*NET 30.2)Claude.aiRaw / share %APIRaw / share %
Prepare and maintain logs, reports, or other documentation of work performed.

49-9099.01

0.2100100.00.2000100.0
Not observed on any surface — 23 task(s) — These tasks have no row in the source for this release. The 0 in the share row is a display-stage composition ratio; absence is what the — in the raw row states.
Identify and correct malfunctions of geothermal plant equipment, electrical systems, instrumentation, or controls.
—0—0
Monitor and adjust operations of geothermal power plant equipment or systems.
—0—0
Identify equipment options, such as compressors, and make appropriate selections.
—0—0
Perform pre- and post-installation pressure, flow, and related tests of vertical and horizontal geothermal loop piping.
—0—0
Collect and record data associated with operating geothermal power plants or well fields.
—0—0
Determine whether emergency or auxiliary systems will be needed to keep properties heated or cooled in extreme weather conditions.
—0—0
Install, maintain, or repair ground or water source-coupled heat pumps to heat and cool residential or commercial building air or water.
—0—0
Adjust power production systems to meet load and distribution demands.
—0—0
Backfill piping trenches to protect pipes from damage.
—0—0
Calculate heat loss and heat gain factors for residential properties to determine heating and cooling required by installed geothermal systems.
—0—0
Design and lay out geothermal heat systems according to property characteristics, heating and cooling requirements, piping and equipment requirements, applicable regulations, or other factors.
—0—0
Determine the type of geothermal loop system most suitable to a specific property and its heating and cooling needs.
—0—0
Dig trenches for system piping to appropriate depths and lay piping in trenches.
—0—0
Prepare newly installed geothermal heat systems for operation by flushing, purging, or other actions.
—0—0
Install and maintain geothermal system instrumentation or controls.
—0—0
Maintain electrical switchgear, process controls, transmitters, gauges, and control equipment in accordance with geothermal plant procedures.
—0—0
Maintain, calibrate, or repair plant instrumentation, control, and electronic devices in geothermal plants.
—0—0
Apply coatings or operate systems to mitigate corrosion of geothermal plant equipment or structures.
—0—0
Install and maintain geothermal plant electrical protection equipment.
—0—0
Integrate hot water heater systems with geothermal heat exchange systems.
—0—0
Operate equipment, such as excavators, backhoes, rock hammers, trench compactors, pavement saws, grout mixers or pumps, geothermal loop reels, and coil tubing units (CTU).
—0—0
Test water sources for factors, such as flow volume and contaminant presence.
—0—0
Weld piping, such as high density polyethylene (HDPE) piping, using techniques such as butt, socket, side-wall, and electro-fusion welding.
—0—0

Data sources & licenses — O*NET®, Anthropic Economic Index, Eloundou et al. (2023): see full notices on the Credits page

O*NET 31.0 के सभी कार्य (24)

इस पेशे के O*NET 31.0 के सभी कार्य (अंग्रेज़ी, जैसे प्रकाशित; कार्य-प्रकार मुख्य या पूरक)। एक्सपोजर मान इस सूची में नहीं हैं; वे ऊपर की तालिका में, हर कार्य के उस पाठ के पास हैं जो प्रत्येक स्रोत द्वारा उपयोग किए गए O*NET संस्करण में है।

कार्य (O*NET 31.0)प्रकार
Identify and correct malfunctions of geothermal plant equipment, electrical systems, instrumentation, or controls.मुख्य
Monitor and adjust operations of geothermal power plant equipment or systems.मुख्य
Identify equipment options, such as compressors, and make appropriate selections.मुख्य
Perform pre- and post-installation pressure, flow, and related tests of vertical and horizontal geothermal loop piping.मुख्य
Collect and record data associated with operating geothermal power plants or well fields.मुख्य
Determine whether emergency or auxiliary systems will be needed to keep properties heated or cooled in extreme weather conditions.मुख्य
Prepare and maintain logs, reports, or other documentation of work performed.मुख्य
Install, maintain, or repair ground or water source-coupled heat pumps to heat and cool residential or commercial building air or water.पूरक
Adjust power production systems to meet load and distribution demands.पूरक
Backfill piping trenches to protect pipes from damage.पूरक
Calculate heat loss and heat gain factors for residential properties to determine heating and cooling required by installed geothermal systems.पूरक
Design and lay out geothermal heat systems according to property characteristics, heating and cooling requirements, piping and equipment requirements, applicable regulations, or other factors.पूरक
Determine the type of geothermal loop system most suitable to a specific property and its heating and cooling needs.पूरक
Dig trenches for system piping to appropriate depths and lay piping in trenches.पूरक
Prepare newly installed geothermal heat systems for operation by flushing, purging, or other actions.पूरक
Install and maintain geothermal system instrumentation or controls.पूरक
Maintain electrical switchgear, process controls, transmitters, gauges, and control equipment in accordance with geothermal plant procedures.पूरक
Maintain, calibrate, or repair plant instrumentation, control, and electronic devices in geothermal plants.पूरक
Apply coatings or operate systems to mitigate corrosion of geothermal plant equipment or structures.पूरक
Install and maintain geothermal plant electrical protection equipment.पूरक
Integrate hot water heater systems with geothermal heat exchange systems.पूरक
Operate equipment, such as excavators, backhoes, rock hammers, trench compactors, pavement saws, grout mixers or pumps, geothermal loop reels, and coil tubing units (CTU).पूरक
Test water sources for factors, such as flow volume and contaminant presence.पूरक
Weld piping, such as high density polyethylene (HDPE) piping, using techniques such as butt, socket, side-wall, and electro-fusion welding.पूरक

व्यावसायिक जानकारी

रोज़गार परिदृश्य (BLS)

ये मान पूरे SOC 49-9099 समूह (Installation, maintenance, and repair workers, all other) के हैं, केवल इस O*NET पेशे के नहीं।

रोज़गार, 2025
205K
अनुमानित रोज़गार, 2035
211K
परिवर्तन (2025–35)
+2.6%
मध्य वार्षिक वेतन, 2025
$49,230
प्रवेश के लिए सामान्यतः आवश्यक शिक्षा
High school diploma or equivalent
न्यूनतम $30,890BLS EP 2025–35 के 825 विस्तृत व्यवसायों के माध्यिका वेतन की सीमाअधिकतम $5,59,030

स्रोत: U.S. Bureau of Labor Statistics, Employment Projections 2025–35 — Employment by detailed occupation, 2025 and projected 2035

कोरियाई वर्गीकरण से संबंध (KSCO)

AI Changing Work द्वारा बनाए गए Korea Occupation Direct Crosswalk v1.1 के वर्तमान संस्करण के संबंध। संबंध-मान O*NET-SOC पेशे की ओर से पढ़े जाते हैं।

KSCO कोडKSCO नामसंबंधस्थिति
86109그 외 발전 및 배전 장치 조작원संबंधित, समकक्ष नहींपुष्ट

संबंध और स्थिति की परिभाषाएँ(kr-direct v1.1)

आईएलओ व्यावसायिक विवरण

नीचे दिए गए ISCO-08 इकाई समूहों को AI Changing Work ने अमेरिकी श्रम सांख्यिकी ब्यूरो (BLS) द्वारा प्रकाशित क्रॉसवॉक (2018 SOC से 2010 SOC, 2010 SOC से ISCO-08) को बिना मामला-दर-मामला चयन के, जैसे प्रकाशित हैं वैसे ही लागू करके इस व्यवसाय से जोड़ा है; प्रत्येक जुड़ाव पूर्ण या आंशिक हो सकता है।

  • ISCO-08 7533Sewing, Embroidery and Related Workers

    सिलाई, कढ़ाई और संबंधित कर्मी

  • ISCO-08 9622Odd Job Persons

    फुटकर कार्य करने वाले

स्वयं अनूदित

स्वयं अनूदित — यह आधिकारिक ISCO शब्दावली नहीं है (ILO द्वारा समीक्षित नहीं)।

Sources: ILO ISCO-08 — details: Credits

ESCO व्यावसायिक शब्दावली

नीचे की प्रत्येक प्रविष्टि प्रकाशित ESCO-O*NET Crosswalk (संस्करण 1, 2022) में इस व्यवसाय से एक-एक करके मिलाई गई है। मिलान के प्रकार उसी क्रॉसवॉक के हैं; शब्दावली AI Changing Work की है।

  • geothermal power plant operatorESCO 3131.1.4आंशिक रूप से मेल, समान नहीं

    Geothermal power plant operators operate and maintain equipment, often steam-driven turbines, which produce electrical energy. They monitor measuring equipment to ensure the safety of operations, and that the production needs are met. They also react to system problems, and repair faults. They may regulate the generators to control the flow of electricity to the power lines.

स्रोत: European Commission, DG EMPL — ESCO API 2026-08-08 (bridge v1.2.1)

लाइसेंस: CC BY 4.0 (EU Reuse Notice)

मूल देखें

ESCO reuse terms and the modification notice are in Credits.

फ़्रांसीसी वर्गीकरण से संबंध (ROME)

इस पेशे और ROME 4.0 पेशा-प्रोफ़ाइलों के बीच संबंध, जिन्हें AI Changing Work ने AI मॉडलों की मदद से तय किया है। संबंध इस पेशे की ओर से पढ़े जाते हैं। ‘अस्थायी’ चिह्नित संबंधों को एक ही मॉडल परिवार (Claude) के दो निर्णायकों के निर्णयों के आधार पर ही, या उन निर्णयों पर संचालक के नियम लागू करके अपनाया गया है, इसलिए ये पुष्ट संबंधों की तुलना में कमज़ोर आधार पर टिके हैं।

ROME कोडROME नाम (फ़्रांसीसी)संबंध
F1138Géothermicien / Géothermicienneसंबंधित, समकक्ष नहींअस्थायी
F1620Installateur / Installatrice chauffage et climatisationसंबंधित, समकक्ष नहींअस्थायी
H2701Technicien / Technicienne d'exploitation en production d'énergie thermiqueसंबंधित, समकक्ष नहींअस्थायी

Source: France Travail — Répertoire Opérationnel des Métiers et des Emplois (ROME 4.0), version 61, last updated 15 June 2026 (https://www.data.gouv.fr/datasets/repertoire-operationnel-des-metiers-et-des-emplois-rome). Licence Ouverte 2.0.

ROME codes and titles are reproduced unchanged; the links to O*NET-SOC occupations are AI Changing Work's own judgment and are not a France Travail correspondence.

(AI Changing Work link release: fr-direct v1)

स्पेनी वर्गीकरण से संबंध (CNO-11)

इस पेशे और CNO-11 पेशों के बीच संबंध, जिन्हें AI Changing Work ने AI मॉडलों की मदद से तय किया है। संबंध इस पेशे की ओर से पढ़े जाते हैं।

CNO-11 कोडCNO-11 नाम (स्पेनी)संबंध
3131Técnicos en instalaciones de producción de energíaसंबंधित, समकक्ष नहींअस्थायी
7250Mecánicos-instaladores de refrigeración y climatizaciónसंबंधित, समकक्ष नहींअस्थायी

Source: Instituto Nacional de Estadística (INE), National Classification of Occupations 2011 (CNO-11, Royal Decree 1591/2010) — www.ine.es · Licensed CC BY 4.0. CNO-11 codes and Spanish titles are reproduced unchanged; the links to O*NET occupations are AI Changing Work's own judgment and are not an INE correspondence.

(AI Changing Work link release: es-direct v1)

जर्मन वर्गीकरण से संबंध (KldB)

इस पेशे और KldB पेशों के बीच संबंध, जिन्हें AI Changing Work ने AI मॉडलों की मदद से तय किया है। संबंध इस पेशे की ओर से पढ़े जाते हैं।

KldB कोडKldB नाम (जर्मन)संबंध
26232Berufe in der Energie- und Kraftwerkstechnik - fachlich ausgerichtete Tätigkeitenसंबंधित, समकक्ष नहीं
26242Berufe in der regenerativen Energietechnik - fachlich ausgerichtete Tätigkeitenसंबंधित, समकक्ष नहीं

Source: © Statistik der Bundesagentur für Arbeit — Klassifikation der Berufe 2010 – überarbeitete Fassung 2020, https://statistik.arbeitsagentur.de. KldB codes and titles are reproduced unchanged; the links to O*NET occupations are AI Changing Work's own mapping (eigene Zuordnung) and are not a Bundesagentur für Arbeit correspondence.

(AI Changing Work link release: de-direct v1)

जापानी वर्गीकरण से संबंध (JSCO)

इस पेशे और JSCO पेशों के बीच संबंध, जिन्हें AI Changing Work ने AI मॉडलों की मदद से तय किया है। संबंध इस पेशे की ओर से पढ़े जाते हैं।

JSCO कोडJSCO नाम (जापानी)संबंध
551はん用・生産用・業務用機械器具整備・修理従事者संबंधित, समकक्ष नहीं
641発電員,変電員संबंधित, समकक्ष नहीं

Source: Ministry of Internal Affairs and Communications (MIC), Japan Standard Occupational Classification (Dec. 2009, MIC Notification No. 555). JSCO codes and Japanese titles are reproduced unchanged; the links to O*NET occupations are AI Changing Work's own judgment and are not a MIC correspondence.

(AI Changing Work link release: jp-direct v1)

इस पेज के डेटा स्रोत व लाइसेंस, और AI Changing Work की संशोधन व अनुवाद सूचनाएँ: Credits और Sources