Values in this tab are predicted labels, not observations. Eloundou et al. (2023) published two rating regimes — human raters and GPT-4 — and the β shown here is derived from the GPT-4 rater basis alone; the same task can take a different value under the other regime. The unit and the meaning differ from the observed shares (%) in the other tabs, so do not place them on the same axis.
Task
βE1 + 0.5 × E2
Remove extra compound after surfaces have been covered sufficiently.Details
O*NET Task ID 13529
0.0
Spread sealing compound between boards or panels or over cracks, holes, nail heads, or screw heads, using trowels, broadknives, or spatulas.Details
O*NET Task ID 13530
0.0
Press paper tape over joints to embed tape into sealing compound and to seal joints.Details
O*NET Task ID 13531
0.0
Mix sealing compounds by hand or with portable electric mixers.Details
O*NET Task ID 13532
0.0
Spread and smooth cementing material over tape, using trowels or floating machines to blend joints with wall surfaces.Details
O*NET Task ID 13533
0.0
Seal joints between plasterboard or other wallboard to prepare wall surfaces for painting or papering.Details
O*NET Task ID 13534
0.0
Sand or patch nicks or cracks in plasterboard or wallboard.Details
O*NET Task ID 13535
0.0
Use mechanical applicators that spread compounds and embed tape in one operation.Details
O*NET Task ID 13536
0.0
Apply additional coats to fill in holes and make surfaces smooth.Details
O*NET Task ID 13537
0.0
Install metal molding at wall corners to secure wallboard.Details
O*NET Task ID 13538
0.0
Sand rough spots of dried cement between applications of compounds.Details
O*NET Task ID 13539
0.0
Countersink nails or screws below surfaces of walls before applying sealing compounds, using hammers or screwdrivers.Details
O*NET Task ID 13540
0.0
Select the correct sealing compound or tape.Details
O*NET Task ID 13541
0.0
Apply texturizing compounds or primers to walls or ceilings before final finishing, using trowels, brushes, rollers, or spray guns.Details
O*NET Task ID 13542
0.0
Check adhesives to ensure that they will work and will remain durable.Details
O*NET Task ID 13543
0.0
Work on high ceilings, using scaffolding or other tools, such as stilts.Details
O*NET Task ID 20788
0.0
β = E1 + 0.5 × E2 · E1 = tasks where direct LLM access alone cuts time by at least 50%, E2 = tasks where software built on top of an LLM cuts time by at least 50%. Values take only 0 / 0.5 / 1.0.
Data sources & licenses — O*NET®, Eloundou et al. (2023): see full notices on the Credits page
Plasterers install, maintain and repair plasterboard in buildings, and apply decorative and protective coverings of plaster, cement and similar material to the interiors and exteriors of structures.
作業
(a) applying one or more coats of plaster to interior walls and ceilings of buildings to produce finished surface;
(b) measuring, marking and installing ornamental plaster panels, and casting and trimming ornamental plaster cornices;
(c) measuring, marking and cutting plasterboard, lifting and positioning panels and securing them to walls, ceilings and battens;
(d) covering joins and nail holes with wet plaster and sealing compounds, and smoothing them using wet brushes and sand paper;
(e) applying protective and decorative covering of cement, plaster and similar materials to exterior building surfaces;
(f) making and installing decorative plaster fixtures of fibrous plaster;
(g) applying and finishing acoustic, insulating and fireproofing materials bonded with plaster, plastic cement and similar materials.
Ceiling installers install ceilings in buildings. They apply different techniques as the situation requires - for example when fire resistance is especially important, or when space is needed between the dropped ceiling and the next floor - or specialise in one.
plastererESCO 7123.2
Plasterers apply plaster made from gypsum, cement or other solutions to walls as a smooth finish. They mix dry plaster powder with water, then smear the resulting paste onto a wall. The plaster is then smoothed before it hardens and forms a solid coating on the wall.
出典:European Commission, DG EMPL — ESCO API 2026-08-08 (bridge v1.2.1)
ESCO reuse terms and the modification notice are in Credits.
Shown in the original Korean. This dataset is published under KOGL Type 4, which prohibits derivative works including translation, so the text is reproduced unaltered.
신체적 강인성(84) · 정교한 동작(77) · 유연성 및 균형(65) · 장비의 유지(63) · 반응시간과 속도(61)
Knowledge
건축 및 설계(87) · 안전과 보안(74) · 디자인(72) · 운송(68) · 영업과 마케팅(66)
Work environment
고지대 작업(100) · 오염물질 노출(100) · 위험한 상태 노출(99) · 몸을 구부리거나 비틀기(96) · 비좁은 업무 공간(96)
Related occupations
단열공 · 유리 부착원(유리공) · 새시 조립 및 설치원 · 방수공 · 타일·대리석시공원 · 미장공 · 도배공
The KNOW occupations and KECO codes listed here were linked to this page's occupation by this site; this is not a correspondence defined by the Korea Employment Information Service or the Ministry of Employment and Labor.
Projected change: -1.6%
Median wage: $68K
lowest $31Kmedian wage across 825 detailed occupations, BLS EP 2025–35highest $559K
Employment: 16K
Typical entry-level education: No formal educational credential
