Read prescriptions or specifications and examine models or impressions to determine the design of dental products to be constructed.Details
51-9081
0.0031100.0
Not observed on any surface — 16 task(s) — These tasks have no row in the source for this release. The 0 in the share row is a display-stage composition ratio; absence is what the — in the raw row states.
Fabricate, alter, or repair dental devices, such as dentures, crowns, bridges, inlays, or appliances for straightening teeth.Details
—0
Test appliances for conformance to specifications and accuracy of occlusion, using articulators and micrometers.Details
—0
Place tooth models on apparatus that mimics bite and movement of patient's jaw to evaluate functionality of model.Details
—0
Melt metals or mix plaster, porcelain, or acrylic pastes and pour materials into molds or over frameworks to form dental prostheses or apparatus.Details
—0
Remove excess metal or porcelain and polish surfaces of prostheses or frameworks, using polishing machines.Details
—0
Create a model of patient's mouth by pouring plaster into a dental impression and allowing plaster to set.Details
—0
Prepare metal surfaces for bonding with porcelain to create artificial teeth, using small hand tools.Details
—0
Load newly constructed teeth into porcelain furnaces to bake the porcelain onto the metal framework.Details
—0
Build and shape wax teeth, using small hand instruments and information from observations or dentists' specifications.Details
—0
Apply porcelain paste or wax over prosthesis frameworks or setups, using brushes and spatulas.Details
—0
Fill chipped or low spots in surfaces of devices, using acrylic resins.Details
—0
Prepare wax bite blocks and impression trays for use.Details
—0
Mold wax over denture setups to form the full contours of artificial gums.Details
—0
Train or supervise other dental technicians or dental laboratory bench workers.Details
—0
Rebuild or replace linings, wire sections, or missing teeth to repair dentures.Details
—0
Shape and solder wire and metal frames or bands for dental products, using soldering irons and hand tools.Details
—0
Values in this tab are predicted labels, not observations. Eloundou et al. (2023) published two rating regimes — human raters and GPT-4 — and the β shown here is derived from the GPT-4 rater basis alone; the same task can take a different value under the other regime. The unit and the meaning differ from the observed shares (%) in the other tabs, so do not place them on the same axis.
Task
βE1 + 0.5 × E2
Read prescriptions or specifications and examine models or impressions to determine the design of dental products to be constructed.Details
O*NET Task ID 7133
0.5
Fabricate, alter, or repair dental devices, such as dentures, crowns, bridges, inlays, or appliances for straightening teeth.Details
O*NET Task ID 7134
0.0
Test appliances for conformance to specifications and accuracy of occlusion, using articulators and micrometers.Details
O*NET Task ID 7135
0.0
Place tooth models on an apparatus that mimics bite and movement of patient's jaw to evaluate functionality of model.Details
O*NET Task ID 7136
0.0
Melt metals or mix plaster, porcelain, or acrylic pastes and pour materials into molds or over frameworks to form dental prostheses or apparatuses.Details
O*NET Task ID 7137
0.0
Prepare metal surfaces for bonding with porcelain to create artificial teeth, using small hand tools.Details
O*NET Task ID 7138
0.0
Remove excess metal or porcelain and polish surfaces of prostheses or frameworks, using polishing machines.Details
O*NET Task ID 7139
0.0
Create a model of patient's mouth by pouring plaster into a dental impression and allowing plaster to set.Details
O*NET Task ID 7140
0.0
Load newly constructed teeth into porcelain furnaces to bake the porcelain onto the metal framework.Details
O*NET Task ID 7141
0.0
Build and shape wax teeth, using small hand instruments and information from observations or dentists' specifications.Details
O*NET Task ID 7142
0.0
Apply porcelain paste or wax over prosthesis frameworks or setups, using brushes and spatulas.Details
O*NET Task ID 7143
0.0
Fill chipped or low spots in surfaces of devices, using acrylic resins.Details
O*NET Task ID 7144
0.0
Prepare wax bite blocks and impression trays for use.Details
O*NET Task ID 7145
0.0
Mold wax over denture setups to form the full contours of artificial gums.Details
O*NET Task ID 7146
0.0
Train or supervise other dental technicians or dental laboratory bench workers.Details
O*NET Task ID 7147
0.0
Rebuild or replace linings, wire sections, or missing teeth to repair dentures.Details
O*NET Task ID 7148
0.0
Shape and solder wire and metal frames or bands for dental products, using soldering irons and hand tools.Details
O*NET Task ID 7149
0.0
β = E1 + 0.5 × E2 · E1 = tasks where direct LLM access alone cuts time by at least 50%, E2 = tasks where software built on top of an LLM cuts time by at least 50%. Values take only 0 / 0.5 / 1.0.
Data sources & licenses — O*NET®, Anthropic Economic Index, Eloundou et al. (2023): see full notices on the Credits page
职业信息
国际劳工组织（ILO）职业说明
Medical and Dental Prosthetic Technicians
医疗和牙科修复技术员
自行翻译
自行翻译 · 非 ISCO 官方词汇 — 未经国际劳工组织审核。
Medical and dental prosthetic technicians design, fit, service and repair medical and dental devices and appliances following prescriptions or instructions established by a health professional. They may service a wide range of support instruments to correct physical medical or dental problems such as neck braces, orthopaedic splints, artificial limbs, hearing aids, arch supports, dentures, and dental crowns and bridges.
任务
(a) examining, interviewing, and measuring patients in order to determine their appliance needs, and to identify factors that could affect appliance fit;
(b) conferring with medical and dental practitioners in order to formulate specifications and prescriptions for devices and appliances;
(c) interpreting prescriptions or specifications to determine the type of product or device to be fabricated, and the materials and tools that will be required;
(d) making or receiving casts or impressions of patients' torsos, limbs, mouths or teeth for use as fabrication patterns;
(e) designing and making orthotic and prosthetic devices using materials such as thermoplastic and thermosetting materials, metal alloys and leather, and hand and power tools;
(f) fitting appliances and devices onto patients, testing and evaluating them, and making adjustments for proper fit, function and comfort;
(g) repairing, modifying and maintaining medical and dental prosthetic and supportive devices, according to specifications;
(h) bending, forming, and shaping fabric or material so that it conforms to prescribed contours needed to fabricate structural components;
(i) fabricating full and partial dentures and constructing mouth guards, crowns, metal clasps, inlays, bridgework and other aids;
(j) instructing patients in the use and care of prosthetic or orthotic devices.
Audiology technicians create and service hearing aids and hearing protection products. They dispense, fit and provide hearing aids for those who need them.
prosthetist-orthotistESCO 3214.3
Prosthetist-orthotists design and custom fit prostheses and orthoses for individuals who are missing a limb from accident, disease or congenital conditions or for individuals who have impairments, deficiences or weaknesses due to injury, pathology or congenital malformation. They mix patient care with the design and fabrication of these devices to address their patients' needs.
来源:European Commission, DG EMPL — ESCO API 2026-08-08 (bridge v1.2.1)
ESCO reuse terms and the modification notice are in Credits.
Shown in the original Korean. This dataset is published under KOGL Type 4, which prohibits derivative works including translation, so the text is reproduced unaltered.
The KNOW occupations and KECO codes listed here were linked to this page's occupation by this site; this is not a correspondence defined by the Korea Employment Information Service or the Ministry of Employment and Labor.
Projected change: -5.9%
Median wage: $50K
lowest $31Kmedian wage across 825 detailed occupations, BLS EP 2025–35highest $559K
Employment: 34K
Typical entry-level education: High school diploma or equivalent
