সিমেন্ট রাজমিস্ত্রি এবং কংক্রিট ফিনিশার
নির্মাণ, রক্ষণাবেক্ষণ ও মেরামতAI এক্সপোজার
- ডেটার উৎস: BLSপ্রকাশকাল: 2026-08
কম· আপেক্ষিক
কমচারটি আপেক্ষিক স্তরঅত্যন্ত উচ্চপেশা-গোষ্ঠী পর্যায়ের মান
স্কেল, ভিত্তি ও উৎস
চারটি আপেক্ষিক স্তর (কম / মাঝারি / উচ্চ / অত্যন্ত উচ্চ)
BLS কর্মসংস্থান পূর্বাভাস সারণির 831টি বিস্তারিত পেশার ভিত্তিতে। মান NEM (ন্যাশনাল এমপ্লয়মেন্ট ম্যাট্রিক্স) কোড অনুযায়ী দেওয়া হয়, তাই একই NEM কোডের পেশাগুলি একই ব্যান্ড পায়
- ডেটার উৎস: Anthropicপ্রকাশকাল: 2026-03
0.000
0.000এখানে থাকা মানগুলোর পরিসর0.745স্কেল, ভিত্তি ও উৎস
- ডেটার উৎস: ILOপ্রকাশকাল: 2025
0.10
0.09এখানে থাকা মানগুলোর পরিসর0.70পেশা-গোষ্ঠী পর্যায়ের মান
স্কেল, ভিত্তি ও উৎস
জেনারেটিভ AI এক্সপোজার সূচক, প্রকাশিত রূপে 0–1
ISCO-08 ইউনিট গ্রুপ — একই কোডের সব পেশা এই মানই পায়
এটি এই সাইটের হিসাব, ILO-এর প্রকাশিত সংখ্যা নয়: এই সাইট ILO ডেটাসেটের সঙ্গে যুক্ত করা ১,০১২টি পেশার মধ্যে 98% এই মানের সমান বা তার বেশি।
এই উৎস কী ধরনের মান প্রকাশ করে
BLS-এর শ্রেণিবিভাগ একটি আপেক্ষিক র্যাঙ্ক, পরম মাত্রা নয়, এবং এটি সরাসরি পরিমাপও নয়: এটি কয়েকটি প্রকাশিত গবেষণায় পাওয়া পেশার পার্সেন্টাইল র্যাঙ্কগুলিকে চারটি স্তরে ভাগ করে। এটি কর্মসংস্থান বা মজুরির পূর্বাভাস নয়, গ্রহণের সম্ভাবনাও নয়, এবং এটি স্বয়ংক্রিয়তা ও সম্প্রসারণের মধ্যে পার্থক্য করে না।
Task-level exposure
25টি লুকানো কাজ দেখুন| Task | Claude.aiRaw / share % |
|---|---|
Monitor how the wind, heat, or cold affect the curing of the concrete throughout the entire process.47-2051 | 0.0280100.0 |
Values in this tab are predicted labels, not observations. Eloundou et al. (2023) published two rating regimes — human raters and GPT-4 — and the β shown here is derived from the GPT-4 rater basis alone; the same task can take a different value under the other regime. The unit and the meaning differ from the observed shares (%) in the other tabs, so do not place them on the same axis.
| Task | βE1 + 0.5 × E2 |
|---|---|
Check the forms that hold the concrete to see that they are properly constructed.O*NET Task ID 7047 | 0.0 |
Set the forms that hold concrete to the desired pitch and depth, and align them.O*NET Task ID 7048 | 0.0 |
Spread, level, and smooth concrete, using rake, shovel, hand or power trowel, hand or power screed, and float.O*NET Task ID 7049 | 0.0 |
Mold expansion joints and edges, using edging tools, jointers, and straightedge.O*NET Task ID 7050 | 0.0 |
Monitor how the wind, heat, or cold affect the curing of the concrete throughout the entire process.O*NET Task ID 7051 | 0.0 |
Signal truck driver to position truck to facilitate pouring concrete, and move chute to direct concrete on forms.O*NET Task ID 7052 | 0.0 |
Produce rough concrete surface, using broom.O*NET Task ID 7053 | 0.0 |
Operate power vibrator to compact concrete.O*NET Task ID 7054 | 0.0 |
Direct the casting of the concrete and supervise laborers who use shovels or special tools to spread it.O*NET Task ID 7055 | 0.0 |
Mix cement, sand, and water to produce concrete, grout, or slurry, using hoe, trowel, tamper, scraper, or concrete-mixing machine.O*NET Task ID 7056 | 0.0 |
Cut out damaged areas, drill holes for reinforcing rods, and position reinforcing rods to repair concrete, using power saw and drill.O*NET Task ID 7057 | 0.0 |
Wet concrete surface, and rub with stone to smooth surface and obtain specified finish.O*NET Task ID 7058 | 0.0 |
Wet surface to prepare for bonding, fill holes and cracks with grout or slurry, and smooth, using trowel.O*NET Task ID 7059 | 0.0 |
Clean chipped area, using wire brush, and feel and observe surface to determine if it is rough or uneven.O*NET Task ID 7060 | 0.0 |
Apply hardening and sealing compounds to cure surface of concrete, and waterproof or restore surface.O*NET Task ID 7061 | 0.0 |
Chip, scrape, and grind high spots, ridges, and rough projections to finish concrete, using pneumatic chisels, power grinders, or hand tools.O*NET Task ID 7062 | 0.0 |
Spread roofing paper on surface of foundation, and spread concrete onto roofing paper with trowel to form terrazzo base.O*NET Task ID 7063 | 0.0 |
Build wooden molds, and clamp molds around area to be repaired, using hand tools.O*NET Task ID 7064 | 0.0 |
Sprinkle colored marble or stone chips, powdered steel, or coloring powder over surface to produce prescribed finish.O*NET Task ID 7065 | 0.0 |
Cut metal division strips, and press them into terrazzo base so that top edges form desired design or pattern.O*NET Task ID 7066 | 0.0 |
Fabricate concrete beams, columns, and panels.O*NET Task ID 7067 | 0.0 |
Waterproof or restore concrete surfaces, using appropriate compounds.O*NET Task ID 7068 | 0.0 |
Install anchor bolts, steel plates, door sills and other fixtures in freshly poured concrete or pattern or stamp the surface to provide a decorative finish.O*NET Task ID 7069 | 0.0 |
Apply muriatic acid to clean surface, and rinse with water.O*NET Task ID 7070 | 0.0 |
Push roller over surface to embed chips in surface.O*NET Task ID 7071 | 0.0 |
Polish surface, using polishing or surfacing machine.O*NET Task ID 7072 | 0.0 |
β = E1 + 0.5 × E2 · E1 = tasks where direct LLM access alone cuts time by at least 50%, E2 = tasks where software built on top of an LLM cuts time by at least 50%. Values take only 0 / 0.5 / 1.0.
Data sources & licenses — O*NET®, Anthropic Economic Index, Eloundou et al. (2023): see full notices on the Credits page
পেশাগত তথ্য
এই পেশা সংক্রান্ত সাম্প্রতিক পরিবর্তন
মার্চ ২০২৬: Evergreen blog post published analyzing AI impact on cement masons (8% exposure, 6/100 risk).
[সূত্র: AI Changing Work Blog]