পেভিং সরঞ্জাম অপারেটর
নির্মাণ, রক্ষণাবেক্ষণ ও মেরামতAI এক্সপোজার
- ডেটার উৎস: BLSপ্রকাশকাল: 2026-08
কম· আপেক্ষিক
কমচারটি আপেক্ষিক স্তরঅত্যন্ত উচ্চপেশা-গোষ্ঠী পর্যায়ের মান
স্কেল, ভিত্তি ও উৎস
চারটি আপেক্ষিক স্তর (কম / মাঝারি / উচ্চ / অত্যন্ত উচ্চ)
BLS কর্মসংস্থান পূর্বাভাস সারণির 831টি বিস্তারিত পেশার ভিত্তিতে। মান NEM (ন্যাশনাল এমপ্লয়মেন্ট ম্যাট্রিক্স) কোড অনুযায়ী দেওয়া হয়, তাই একই NEM কোডের পেশাগুলি একই ব্যান্ড পায়
- ডেটার উৎস: Anthropicপ্রকাশকাল: 2026-03
0.000
0.000এখানে থাকা মানগুলোর পরিসর0.745স্কেল, ভিত্তি ও উৎস
- ডেটার উৎস: ILOপ্রকাশকাল: 2025
0.13
0.09এখানে থাকা মানগুলোর পরিসর0.70পেশা-গোষ্ঠী পর্যায়ের মান
স্কেল, ভিত্তি ও উৎস
জেনারেটিভ AI এক্সপোজার সূচক, প্রকাশিত রূপে 0–1
ISCO-08 ইউনিট গ্রুপ — একই কোডের সব পেশা এই মানই পায়
এটি এই সাইটের হিসাব, ILO-এর প্রকাশিত সংখ্যা নয়: এই সাইট ILO ডেটাসেটের সঙ্গে যুক্ত করা ১,০১২টি পেশার মধ্যে 97% এই মানের সমান বা তার বেশি।
এই উৎস কী ধরনের মান প্রকাশ করে
BLS-এর শ্রেণিবিভাগ একটি আপেক্ষিক র্যাঙ্ক, পরম মাত্রা নয়, এবং এটি সরাসরি পরিমাপও নয়: এটি কয়েকটি প্রকাশিত গবেষণায় পাওয়া পেশার পার্সেন্টাইল র্যাঙ্কগুলিকে চারটি স্তরে ভাগ করে। এটি কর্মসংস্থান বা মজুরির পূর্বাভাস নয়, গ্রহণের সম্ভাবনাও নয়, এবং এটি স্বয়ংক্রিয়তা ও সম্প্রসারণের মধ্যে পার্থক্য করে না।
Task-level exposure
Values in this tab are predicted labels, not observations. Eloundou et al. (2023) published two rating regimes — human raters and GPT-4 — and the β shown here is derived from the GPT-4 rater basis alone; the same task can take a different value under the other regime.
| Task | βE1 + 0.5 × E2 |
|---|---|
Start machine, engage clutch, and push and move levers to guide machine along forms or guidelines and to control the operation of machine attachments.O*NET Task ID 4796 | 0.0 |
Inspect, clean, maintain, and repair equipment, using mechanics' hand tools, or report malfunctions to supervisors.O*NET Task ID 4797 | 0.0 |
Operate machines to spread, smooth, level, or steel-reinforce stone, concrete, or asphalt on road beds.O*NET Task ID 4798 | 0.0 |
Operate oil distributors, loaders, chip spreaders, dump trucks, and snow plows.O*NET Task ID 4799 | 0.0 |
Coordinate truck dumping.O*NET Task ID 4800 | 0.0 |
Set up and tear down equipment.O*NET Task ID 4801 | 0.0 |
Operate tamping machines or manually roll surfaces to compact earth fills, foundation forms, and finished road materials, according to grade specifications.O*NET Task ID 4802 | 0.0 |
Shovel blacktop.O*NET Task ID 4803 | 0.0 |
Drive machines onto truck trailers, and drive trucks to transport machines and material to and from job sites.O*NET Task ID 4804 | 0.0 |
Observe distribution of paving material to adjust machine settings or material flow, and indicate low spots for workers to add material.O*NET Task ID 4805 | 0.0 |
Light burners or start heating units of machines, and regulate screed temperatures and asphalt flow rates.O*NET Task ID 4806 | 0.0 |
Control paving machines to push dump trucks and to maintain a constant flow of asphalt or other material into hoppers or screeds.O*NET Task ID 4807 | 0.0 |
Set up forms and lay out guidelines for curbs, according to written specifications, using string, spray paint, and concrete or water mixes.O*NET Task ID 4808 | 0.0 |
Fill tanks, hoppers, or machines with paving materials.O*NET Task ID 4809 | 0.0 |
Drive and operate curbing machines to extrude concrete or asphalt curbing.O*NET Task ID 4810 | 0.0 |
Cut or break up pavement and drive guardrail posts, using machines equipped with interchangeable hammers.O*NET Task ID 4811 | 0.0 |
Install dies, cutters, and extensions to screeds onto machines, using hand tools.O*NET Task ID 4812 | 0.0 |
Operate machines that clean or cut expansion joints in concrete or asphalt and that rout out cracks in pavement.O*NET Task ID 4813 | 0.0 |
Place strips of material, such as cork, asphalt, or steel into joints, or place rolls of expansion-joint material on machines that automatically insert material.O*NET Task ID 4814 | 0.0 |
Control traffic.O*NET Task ID 20143 | 0.0 |
β = E1 + 0.5 × E2 · E1 = tasks where direct LLM access alone cuts time by at least 50%, E2 = tasks where software built on top of an LLM cuts time by at least 50%. Values take only 0 / 0.5 / 1.0.
Data sources & licenses — O*NET®, Eloundou et al. (2023): see full notices on the Credits page