টেরাজো কর্মী
নির্মাণ, রক্ষণাবেক্ষণ ও মেরামতAI এক্সপোজার
- ডেটার উৎস: BLSপ্রকাশকাল: 2026-08
কম· আপেক্ষিক
কমচারটি আপেক্ষিক স্তরঅত্যন্ত উচ্চপেশা-গোষ্ঠী পর্যায়ের মান
স্কেল, ভিত্তি ও উৎস
চারটি আপেক্ষিক স্তর (কম / মাঝারি / উচ্চ / অত্যন্ত উচ্চ)
BLS কর্মসংস্থান পূর্বাভাস সারণির 831টি বিস্তারিত পেশার ভিত্তিতে। মান NEM (ন্যাশনাল এমপ্লয়মেন্ট ম্যাট্রিক্স) কোড অনুযায়ী দেওয়া হয়, তাই একই NEM কোডের পেশাগুলি একই ব্যান্ড পায়
- ডেটার উৎস: Anthropicপ্রকাশকাল: 2026-03
0.000
0.000এখানে থাকা মানগুলোর পরিসর0.745স্কেল, ভিত্তি ও উৎস
- ডেটার উৎস: ILOপ্রকাশকাল: 2025
0.10
0.09এখানে থাকা মানগুলোর পরিসর0.70পেশা-গোষ্ঠী পর্যায়ের মান
স্কেল, ভিত্তি ও উৎস
জেনারেটিভ AI এক্সপোজার সূচক, প্রকাশিত রূপে 0–1
ISCO-08 ইউনিট গ্রুপ — একই কোডের সব পেশা এই মানই পায়
এটি এই সাইটের হিসাব, ILO-এর প্রকাশিত সংখ্যা নয়: এই সাইট ILO ডেটাসেটের সঙ্গে যুক্ত করা ১,০১২টি পেশার মধ্যে 98% এই মানের সমান বা তার বেশি।
এই উৎস কী ধরনের মান প্রকাশ করে
BLS-এর শ্রেণিবিভাগ একটি আপেক্ষিক র্যাঙ্ক, পরম মাত্রা নয়, এবং এটি সরাসরি পরিমাপও নয়: এটি কয়েকটি প্রকাশিত গবেষণায় পাওয়া পেশার পার্সেন্টাইল র্যাঙ্কগুলিকে চারটি স্তরে ভাগ করে। এটি কর্মসংস্থান বা মজুরির পূর্বাভাস নয়, গ্রহণের সম্ভাবনাও নয়, এবং এটি স্বয়ংক্রিয়তা ও সম্প্রসারণের মধ্যে পার্থক্য করে না।
Task-level exposure
25টি লুকানো কাজ দেখুন| Task | Claude.aiRaw / share % |
|---|---|
Wet concrete surface and rub with stone to smooth surface and obtain specified finish.47-2053 | 0.0028100.0 |
Values in this tab are predicted labels, not observations. Eloundou et al. (2023) published two rating regimes — human raters and GPT-4 — and the β shown here is derived from the GPT-4 rater basis alone; the same task can take a different value under the other regime. The unit and the meaning differ from the observed shares (%) in the other tabs, so do not place them on the same axis.
| Task | βE1 + 0.5 × E2 |
|---|---|
Cut metal division strips and press them into the terrazzo base for joints or changes of color to form designs or patterns or to help prevent cracks.O*NET Task ID 9823 | 0.0 |
Blend marble chip mixtures, place into panels, and push a roller over the surface to embed the chips.O*NET Task ID 9824 | 0.0 |
Measure designated amounts of ingredients for terrazzo or grout, according to standard formulas and specifications, using graduated containers and scales, and load ingredients into portable mixer.O*NET Task ID 9825 | 0.0 |
Mold expansion joints and edges, using edging tools, jointers, or straightedges.O*NET Task ID 9826 | 0.0 |
Spread, level, or smooth concrete or terrazzo mixtures to form bases or finished surfaces, using rakes, shovels, hand or power trowels, hand or power screeds, or floats.O*NET Task ID 9827 | 0.0 |
Grind curved surfaces or areas inaccessible to surfacing machine, such as stairways or cabinet tops, with portable hand grinder.O*NET Task ID 9828 | 0.0 |
Grind surfaces with a power grinder, or polish surfaces with polishing or surfacing machines.O*NET Task ID 9829 | 0.0 |
Position and secure moisture membrane and wire mesh in preparation for pouring base materials for terrazzo installation.O*NET Task ID 9830 | 0.0 |
Modify mixing, grouting, grinding, or cleaning procedures, according to type of installation or material used.O*NET Task ID 9831 | 0.0 |
Wash polished terrazzo surface, using cleaner and water, and apply sealer and curing agent according to manufacturer's specifications, using brush or sprayer.O*NET Task ID 9832 | 0.0 |
Mix cement, sand, and water to produce concrete, grout, or slurry, using hoe, trowel, tamper, scraper, or concrete-mixing machine.O*NET Task ID 9833 | 0.0 |
Sprinkle colored marble or stone chips, powdered steel, or coloring powder over surface to produce prescribed finish.O*NET Task ID 9834 | 0.0 |
Wet surface to prepare for bonding, fill holes and cracks with grout or slurry, and smooth with a trowel.O*NET Task ID 9835 | 0.0 |
Repair concrete by cutting out damaged areas, drilling holes for reinforcing rods, and positioning reinforcing rods, using power saw and drill.O*NET Task ID 9836 | 0.0 |
Clean installation site, mixing and storage areas, tools, machines, and equipment, and store materials and equipment.O*NET Task ID 9837 | 0.0 |
Fill slight grinding depressions with matching grout material and hand-trowel for a smooth, uniform surface.O*NET Task ID 9838 | 0.0 |
Chip, scrape, or grind high spots, ridges, or rough projections to finish concrete, using pneumatic chisel, hand chisel, or other hand tools.O*NET Task ID 9839 | 0.0 |
Clean chipped area, using wire brush, and feel and observe surface to determine if it is rough or uneven.O*NET Task ID 9840 | 0.0 |
Move terrazzo installation materials, tools, machines, or work devices to work areas, manually or using wheelbarrow.O*NET Task ID 9841 | 0.0 |
Build wooden molds, clamping molds around areas to be repaired, or setting up frames to the proper depth and alignment.O*NET Task ID 9842 | 0.0 |
Signal truck driver to position truck to facilitate pouring concrete and move chute to direct concrete on forms.O*NET Task ID 9843 | 0.0 |
Produce rough concrete surface, using broom.O*NET Task ID 9844 | 0.0 |
Precast terrazzo blocks in wooden forms.O*NET Task ID 9845 | 0.0 |
Spread roofing paper on surface of foundation and spread concrete onto roofing paper with trowel to form terrazzo base.O*NET Task ID 9846 | 0.0 |
Remove frames when the foundation is dry.O*NET Task ID 9847 | 0.0 |
Wet concrete surface and rub with stone to smooth surface and obtain specified finish.O*NET Task ID 9848 | 0.0 |
β = E1 + 0.5 × E2 · E1 = tasks where direct LLM access alone cuts time by at least 50%, E2 = tasks where software built on top of an LLM cuts time by at least 50%. Values take only 0 / 0.5 / 1.0.
Data sources & licenses — O*NET®, Anthropic Economic Index, Eloundou et al. (2023): see full notices on the Credits page