Millwrights
🔧Construction, Maintenance & RepairAI exposure
- Data source: BLSPublished: 2026-08
Low· relative
LowFour relative bandsVery highGroup-level value
Scale, basis and source
Four relative bands (Low / Moderate / High / Very high)
831 detailed occupations in the BLS Employment Projections table. Assigned per National Employment Matrix (NEM) code, so occupations sharing a NEM code carry the same band
- Data source: AnthropicPublished: 2026-03
0.000
0.000Range of values carried here0.745Scale, basis and source
- Data source: ILOPublished: 2025
0.17
0.09Range of values carried here0.70Group-level value
Scale, basis and source
Generative AI exposure index, 0–1 as published
ISCO-08 unit group — every occupation sharing the code gets this value
Computed by this site, not published by the ILO: of the 1,012 occupations this site links to the ILO dataset, 91% score at or above this value.
What kind of figure this source publishes
The BLS category is a relative rank, not an absolute level, and it is not a first-hand measurement: it groups an occupation's percentile ranks across several published studies into four bands. It is not an employment or wage forecast, not a probability of adoption, and it does not separate automation from augmentation.
Task-level exposure
Show 22 hidden tasks| Task | Claude.aiRaw / share % |
|---|---|
Troubleshoot equipment, electrical components, hydraulics, or other mechanical systems.Details49-9044 | 0.0042100.0 |
Values in this tab are predicted labels, not observations. Eloundou et al. (2023) published two rating regimes — human raters and GPT-4 — and the β shown here is derived from the GPT-4 rater basis alone; the same task can take a different value under the other regime. The unit and the meaning differ from the observed shares (%) in the other tabs, so do not place them on the same axis.
| Task | βE1 + 0.5 × E2 |
|---|---|
Install robot and modify its program, using teach pendant.DetailsO*NET Task ID 3059 | 0.5 |
β = E1 + 0.5 × E2 · E1 = tasks where direct LLM access alone cuts time by at least 50%, E2 = tasks where software built on top of an LLM cuts time by at least 50%. Values take only 0 / 0.5 / 1.0.
Data sources & licenses — O*NET®, Anthropic Economic Index, Eloundou et al. (2023): see full notices on the Credits page
Occupation information
ILO occupational description
Agricultural and Industrial Machinery Mechanics and Repairers
Agricultural and industrial machinery mechanics and repairers fit, install, examine, service and repair engines, agricultural and industrial machinery and mechanical equipment, except motor vehicle, aircraft and electric motors.
Tasks
- (a) fitting, installing, examining, servicing and repairing engines, machinery and mechanical equipment;
- (b) oiling and greasing stationary engines and machinery;
- (c) inspecting and testing new machinery and mechanical equipment for conformity with standards and specifications;
- (d) disassembling machinery and equipment to remove parts and make repairs;
- (e) examining parts for defects such as breakage and excessive wear;
- (f) operating newly repaired machinery and equipment to verify the adequacy of repairs;
- (g) recording repairs and maintenance performed.
Example occupations
Construction machinery mechanic · Construction machinery repairer · Farm machinery repairer · Mining machinery fitter · Mining machinery repairer · Stationary engine fitter · Stationary engine repairer · Train engine fitter · Train engine repairer
Sources: ILO ISCO-08 — details: Credits
ESCO occupational vocabulary
- land-based machinery technicianESCO 7233.8
Land-based machinery technicians maintain, overhaul and repair agricultural equipment and machinery.
- fluid power technicianESCO 7233.4
Fluid power technicians install and assemble equipment that uses liquid or gas pressure to transmit or regulate power. They also perform tests on and maintain this equipment.
- greaserESCO 7233.6
Greasers make sure industrial machines are properly lubricated to maintain operations. They use grease guns to oil machines. Greasers also perform basic maintenance and repair duties.
- rotating equipment mechanicESCO 7233.13
Rotating equipment mechanics are responsible for preventive and corrective maintenance activities for rotating equipment such as turbines, compressors, engines, and pumps. They ensure the availability and integrity of the installed systems and equipment in terms of safety and reliability.
- industrial machinery mechanicESCO 7233.7
Industrial machinery mechanics work on new machinery and equipment in operation. They set up for the specific application and build accessories if necessary, perform maintenance and repair, and run diagnostics to find faults in systems or parts that need replacing.
- textile machinery technicianESCO 7233.14
Textile machinery technicians set up, maintain, inspect and repair mechanical and computer-controlled machinery used in textile manufacturing such as weaving, dyeing and finishing machines.
- pneumatic systems technicianESCO 7233.12
Pneumatic systems technicians use blueprints and technical documentation to assemble and install equipment operated by gas or air under pressure. They set up the systems according to engineering specifications and test them to ensure good functioning order. They may also perform maintenance and repair work on installed pneumatic equipment.
- forge equipment technicianESCO 7233.5
Forge equipment technicians maintain and repair forge machinery such as presses and material handling equipment. They perform evaluations of the equipment, perform preventative maintenance activities, and repair faults. They also assist in the installation of the equipment and ensure proper functionality.
- moulding machine technicianESCO 7233.11
Moulding machine technicians service machinery used in the casting and moulding of plastics and other materials. They calibrate the equipment, perform maintenance activities, examine finished products and repair faults.
- fisheries assistant engineerESCO 7233.3
Fisheries assistant engineers assist the marine chief engineer with checking operations and maintenance of the propulsion plant, machinery and auxiliary equipment of the ship. They collaborate on security, survival and health care on board, observing the national and international standards of application.
- marine mechanicESCO 7233.9
Marine mechanics are in charge of the engines and mechanical parts of the vessel and replace defective equipment and parts. They communicate with other crew members on the operational level. Marine mechanics maintain and repair the engines and the other machinery of vessels such as boilers, generators and electrical equipment.
- mining equipment mechanicESCO 7233.10
Mining equipment mechanics install, remove, maintain and repair mining equipment.
Source: European Commission, DG EMPL — ESCO API 2026-08-08 (bridge v1.2.1)
License: CC BY 4.0 (EU Reuse Notice)
ESCO reuse terms and the modification notice are in Credits.
Shown in the original Korean. This dataset is published under KOGL Type 4, which prohibits derivative works including translation, so the text is reproduced unaltered.
- 선박 정비원KNOW K000000976
Job outlook: 증가(0%) 현상유지(50%) 감소(50%)
Wages (10,000 KRW): lower(25%) 3.5K average(50%) 4.4K upper(25%) 5.5K
minacross 461 KNOW occupationsmaxJob satisfaction: 71.8
minacross 461 KNOW occupationsmaxDetails ▾▴
Duties
- -정비할 선박의 제원, 설계도, 정비이력카드, 검사 관련 규정 등을 파악한다.
- -정비 범위, 요구 품질, 공사기간 등을 반영하여 정비계획서를 작성한다.
- -정비에 필요한 자재목록을 작성해 발주하고, 입고되면 검사 후 운반,보관한다.
- -시험·측정기구를 사용하여 선박의 각 부분을 진단·검사하여 고장의 위치, 범위, 정도와 잠재적 불량상태 등을 확인한다.
- -고장 부위를 분해하고 수리 또는 교체의 필요성을 판단하기 위하여 명세서와 비교·검사하고 작동상태를 평가한다.
- -고장나거나 사용 한계치를 초과한 부품을 교체한다.
- -연료, 오일 및 기타 보급품을 채운다.
- -부품의 교체설치 또는 수리한 부분의 작동상태를 검사하여 확인한다.
- -관련 규정 및 법규에 따라 검사결과를 기록한다.
- -완공사양서, 정비이력서를 작성하고 정비품을 인도한다.
See details on KNOW (Korea Employment Information Service) (external site)
Work abilities
고장의 발견.수리(92) · 작동 점검(77) · 신체적 강인성(74) · 장비 선정(72) · 장비의 유지(69)
Knowledge
기계(81) · 생물(71) · 운송(68) · 화학(66) · 건축 및 설계(64)
Work environment
극단적으로 밝거나 부적절한 조명(99) · 비좁은 업무 공간(98) · 위험한 상태 노출(97) · 온몸 진동 노출(96) · 매우 춥거나 더운 기온(94)
Related occupations
항공기 정비원 · 철도기관차 및 전동차 정비원 · 자동차 정비원
- 공업기계 설치 및 정비원KNOW K000001023
Job outlook: 증가(17%) 현상유지(40%) 감소(43%)
Wages (10,000 KRW): lower(25%) 4.0K average(50%) 4.9K upper(25%) 6.25K
minacross 461 KNOW occupationsmaxJob satisfaction: 63.6
minacross 461 KNOW occupationsmaxDetails ▾▴
Duties
- -선반, 밀링머신 등 금속공작기계를 설치, 검사, 정비 및 수리한다.
- -가동 중인 금속공작기계의 작동상태를 점검하고 필요한 조정을 한다.
- -일정한 주기로 금속공작기계를 전체 또는 부분적으로 분해하여 소제한다.
- -기준과 명세서의 일치여부를 확인하기 위하여 시험 운영한다.
See details on KNOW (Korea Employment Information Service) (external site)
Work abilities
설치(99) · 고장의 발견.수리(98) · 작동 점검(96) · 장비의 유지(95) · 장비 선정(95)
Knowledge
기계(89) · 공학과 기술(83) · 건축 및 설계(82) · 화학(79) · 물리(78)
Work environment
극단적으로 밝거나 부적절한 조명(99) · 비좁은 업무 공간(98) · 온몸 진동 노출(97) · 오염물질 노출(97) · 장비 속도에 보조 맞추기(94)
Related occupations
승강기 설치 및 정비원 · 냉동·냉장·공조기 설치 및 정비원 · 보일러 설치 및 정비원 · 농업용·기타 기계장비 설치 및 정비원 · 크레인 및 지게차 설치 및 정비원 · 건설·광업용기계설치 및 정비원
- 철도기관차 및 전동차 정비원KNOW K000001030
Job outlook: 증가(0%) 현상유지(53%) 감소(46%)
Wages (10,000 KRW): lower(25%) 4.075K average(50%) 4.95K upper(25%) 5.5K
minacross 461 KNOW occupationsmaxJob satisfaction: 70.6
minacross 461 KNOW occupationsmaxDetails ▾▴
Duties
- -검사를 위한 차량이 입환되면 차체를 분리한다.
- -각종 볼트, 너트 이완 여부 및 균열 여부를 점검하고, 윤축(축에 바퀴를 고정하여 바퀴와 축을 동시에 회전시키는 장치)의 각종 부품을 교환하거나 수리한다.
- -바퀴의 상태, 차체 내의 공기배관설비, 출입문, 차내 시설, 냉방장치등을 분해·점검하고, 이상이 있는 부품을 교체하거나 수리한다.
- -전기기관차 및 전동차의 경우 전자장치 및 PCB(운전속도나 제동과관련한 전자회로) 등을 검사하여 불량상태를 파악한다.
- -공기압축기, ATS(발전기 열차자동정지장치), 전자기판을 전압조정기, 오실로스코프 등을 이용하여 검사한다.
- -전자식속도기록계를 분석한다.
- -회전기를 분해하여 정비한다.
- -객차, 화차를 전문적으로 정비·수리하기도 한다.
See details on KNOW (Korea Employment Information Service) (external site)
Work abilities
고장의 발견.수리(94) · 정교한 동작(86) · 작동 점검(85) · 장비의 유지(80) · 움직임 통제(79)
Knowledge
기계(80) · 운송(76) · 공학과 기술(68) · 물리(57) · 안전과 보안(56)
Work environment
실외 근무(97) · 보호장비 착용(92) · 위험한 상태 노출(85) · 매우 춥거나 더운 기온(81) · 서서 근무(80)
Related occupations
항공기 정비원 · 선박 정비원 · 자동차 정비원
- 보일러 설치 및 정비원KNOW K000001031
Job outlook: 증가(3%) 현상유지(53%) 감소(43%)
Wages (10,000 KRW): lower(25%) 3.475K average(50%) 4.0K upper(25%) 4.8K
minacross 461 KNOW occupationsmaxJob satisfaction: 66.1
minacross 461 KNOW occupationsmaxDetails ▾▴
Duties
- -기반 위에 축조한 콘크리트 또는 철근콘크리트 기초의 수평상태를 수준기로 검사한다.
- -바닥에 휨과 처짐이 발생하지 않도록 기초 위에 가설받침대를 수평으로 설치하고 기초볼트로 균등하게 조인다.
- -보일러 본체, 탱크, 펌프 등을 새들 및 잭을 사용하여 가설받침대에 올려놓고 정확한 설치치수로 설치한다.
- -펌프의 누수를 받기 위해 기초 주위에 배수홈을 만든다.
- -배관은 플랜지 및 밸브를 부착하여 기기류의 탈착이 용이하고 그 중량이 직접 기기에 걸리지 않도록 지지하여 고정한다.
- -탱크와 연소장치 사이에 연료 이송관을 연결하고, 케이트, 밸브, 첵밸브,유수분리기, 오일필터 등을 연료 이송관에 나사이음으로 조립한다.
- -용접 또는 리벳팅 가공으로 연도를 조립하고, 연도의 이음부분은 기밀을 유지하기 위하여 석면사 또는 패킹을 삽입한다.
- -연도의 길이에 따라 적당한 부분에 걸이 또는 브래킷과 가대로 지지한다.
- -보일러의 주밸브와 건물난방용 배관구 또는 산업기기의 스팀 밸브 사이에 관을 연결하여 용접하고 압력계를 설치한다.
- -온도계, 수면계, 유량계 등 각종 측정기기를 부착한다.
- -고장 난 보일러 및 보조설비의 온도, 압력, 수위, 진동, 누설, 이상음 발생 등을 진단한다. 배관, 밸브 등 정비할 부품이나 설비를 분해한다.
- -파손 또는 마모의 경중에 따라 수리하거나 부품을 교체한다.
- -정비한 설비를 재조립한 뒤 시운전을 하고, 설비의 정도를 재조정한다.
- -정기적으로 보일러 및 보조설비의 이상 유무를 점검한다.
See details on KNOW (Korea Employment Information Service) (external site)
Work abilities
설치(99) · 고장의 발견.수리(92) · 작동 점검(91) · 장비의 유지(84) · 장비 선정(82)
Knowledge
기계(87) · 공학과 기술(77) · 고객서비스(71) · 건축 및 설계(71) · 영업과 마케팅(67)
Work environment
비좁은 업무 공간(99) · 보호장비 착용(96) · 결과에 대한 책임(92) · 몸을 구부리거나 비틀기(91) · 균형을 유지하기(91)
Related occupations
승강기 설치 및 정비원 · 냉동·냉장·공조기 설치 및 정비원 · 공업기계 설치 및 정비원 · 농업용·기타 기계장비 설치 및 정비원 · 크레인 및 지게차 설치 및 정비원 · 건설·광업용기계설치 및 정비원
- 농업용·기타 기계장비 설치 및 정비원KNOW K000001043
Job outlook: 증가(0%) 현상유지(60%) 감소(40%)
Wages (10,000 KRW): lower(25%) 3.0K average(50%) 3.65K upper(25%) 4.575K
minacross 461 KNOW occupationsmaxJob satisfaction: 66.9
minacross 461 KNOW occupationsmaxDetails ▾▴
Duties
- -각종 농업용 기계의 고장 여부와 원인을 분석한다.
- -교체가 필요한 농업용 기계의 부품을 교환한다.
- -농업용 기계가 원활하게 진행될 수 있도록 경정비한다.
- -고장난 부품이나 농기계를 수리한다.
See details on KNOW (Korea Employment Information Service) (external site)
Work abilities
고장의 발견.수리(98) · 장비의 유지(91) · 장비 선정(90) · 작동 점검(81) · 설치(80)
Knowledge
기계(93) · 상품 제조 및 공정(66) · 운송(66) · 공학과 기술(66) · 건축 및 설계(66)
Work environment
경미한 화상, 자상, 찔림 등 노출(100) · 위험한 장비 노출(100) · 온몸 진동 노출(99) · 위험한 상태 노출(99) · 서서 근무(98)
Related occupations
승강기 설치 및 정비원 · 냉동·냉장·공조기 설치 및 정비원 · 공업기계 설치 및 정비원 · 보일러 설치 및 정비원 · 크레인 및 지게차 설치 및 정비원 · 건설·광업용기계설치 및 정비원
- 항공기 정비원KNOW K000000822
Job outlook: 증가(37%) 현상유지(52%) 감소(10%)
Wages (10,000 KRW): lower(25%) 3.775K average(50%) 4.45K upper(25%) 5.725K
minacross 461 KNOW occupationsmaxJob satisfaction: 73
minacross 461 KNOW occupationsmaxDetails ▾▴
Duties
- -항공 일정 및 운항시간 등을 확인한다.
- -주기장에서 비행 전후의 항공기를 대상으로 검사장비를 이용하거나 육안으로 기체부분의 변형 및 파손, 부식상태 등을 점검한다.
- -고장 부위를 분해하고 수리 또는 교체의 필요성을 판단하기 위하여 명세서와 비교·검사하여 작동상태를 살핀다.
- -점검 카드 목록에 따라 전기, 보기 계통을 점검하고, 항공기에 장착되어 있는 기관의 작동상태를 정비한다.
- -부품을 점검하고 교환주기를 확인하여 사용 수명이 완료된 부품을 교체한다.
- -설치 또는 수리부분의 작동상태를 검사·확인한다.
- -연료, 오일 및 기타 보급품을 채운다.
- -오일 및 공압류의 유출 등 이상이 없는지 확인하고 이상 발견 시 원인을 찾고 수리한다.
- -신종 항공기 기술정보, 안전운항 규정 등의 교육을 이수한다.
See details on KNOW (Korea Employment Information Service) (external site)
Work abilities
장비의 유지(98) · 고장의 발견.수리(98) · 작동 점검(98) · 시력(96) · 설치(96)
Knowledge
기계(89) · 운송(77) · 공학과 기술(75) · 물리(64) · 안전과 보안(63)
Work environment
비좁은 업무 공간(100) · 위험한 상태 노출(99) · 실수의 심각성(99) · 위험한 장비 노출(99) · 몸을 구부리거나 비틀기(98)
Related occupations
선박 정비원 · 철도기관차 및 전동차 정비원 · 자동차 정비원
- 승강기 설치 및 정비원KNOW K000000885
Job outlook: 증가(16%) 현상유지(40%) 감소(43%)
Wages (10,000 KRW): lower(25%) 3.5K average(50%) 4.05K upper(25%) 4.6K
minacross 461 KNOW occupationsmaxJob satisfaction: 68.4
minacross 461 KNOW occupationsmaxDetails ▾▴
Duties
- -제품표준서를 참고하여 제품규격을 숙지한다.
- -육안 또는 버니어캘리퍼스 등을 이용하여 외관과 치수, 재질을 확인한다.
- -도면을 바탕으로 임팩트를 사용하여 브라켓을 조립한다.
- -작업지시서를 바탕으로 작업현장의 현장도면과 제품도면을 숙지하여 현장에 필요한 부품의 종류를 확인한다.
- -설치현장에 엘리베이터를 설치한다.
- -현장 조건과 표준부품과의 편차가 발생하면 현장에서 가공하여 조립하기도 한다.
- -고장 시 엘리베이터를 정비한다.
See details on KNOW (Korea Employment Information Service) (external site)
Work abilities
설치(98) · 작동 점검(97) · 고장의 발견.수리(96) · 장비의 유지(91) · 조작 및 통제(86)
Knowledge
기계(81) · 안전과 보안(74) · 공학과 기술(58) · 운송(57) · 컴퓨터와 전자공학(56)
Work environment
비좁은 업무 공간(100) · 몸을 구부리거나 비틀기(99) · 극단적으로 밝거나 부적절한 조명(97) · 위험한 장비 노출(97) · 실수의 심각성(96)
Related occupations
냉동·냉장·공조기 설치 및 정비원 · 공업기계 설치 및 정비원 · 보일러 설치 및 정비원 · 농업용·기타 기계장비 설치 및 정비원 · 크레인 및 지게차 설치 및 정비원 · 건설·광업용기계설치 및 정비원
- 냉동·냉장·공조기 설치 및 정비원KNOW K000000886
Job outlook: 증가(3%) 현상유지(52%) 감소(44%)
Wages (10,000 KRW): lower(25%) 3.475K average(50%) 4.25K upper(25%) 5.0K
minacross 461 KNOW occupationsmaxJob satisfaction: 67.2
minacross 461 KNOW occupationsmaxDetails ▾▴
Duties
- -설계도서에 따라 냉동공조설비 설치계획을 수립한다.
- -시방서, 내역서, 부하계산서, 설계도면 등 설계도서가 현장 여건과 일치하는지 확인하고 검토한다.
- -설치할 설비의 상태, 기능, 성능을 점검한다.
- -냉열원장치(증기압축식 냉동장치, 흡수식 냉동장치, 빙축열 설비, 지열설비, GHP, EHP, 시스템에어컨 등), 온열원장치(보일러설비, 증기설비, 난방설비, 급탕설비 등 기타 가열장치)를 설치한다.
- -공조기, 공조배관, 공조덕트, 환기설비, 급배수설비 등을 설치한다.
- -공조 및 열원설비의 성능을 유지하고 효율적인 운전을 위한 자동제어시스템을 구성하고 설치한다.
- -시운전을 통해 평가 및 성능검사를 수행한다.
- -정기적으로 냉방설비 및 보조설비의 이상 유무를 점검한다.
- -고장 시 냉장설비 및 보조설비의온도, 압력, 수위, 진동, 누설, 이상음 발생 등을 진단한다.
- -배관, 밸브 등 정비할 부품이나 설비를 분해한다.
- -파손 또는 마모의 경중에 따라 수리하거나 부품을 교체한다.
- -정비한 설비를 재조립한 후 시운전을 하고 설비의 게이지를 재조정한다.
See details on KNOW (Korea Employment Information Service) (external site)
Work abilities
설치(96) · 고장의 발견.수리(92) · 움직임 통제(89) · 신체적 강인성(87) · 정교한 동작(86)
Knowledge
기계(86) · 공학과 기술(81) · 상품 제조 및 공정(71) · 물리(68) · 건축 및 설계(68)
Work environment
보호장비 착용(92) · 고지대 작업(91) · 매우 춥거나 더운 기온(89) · 균형을 유지하기(86) · 전화 대화하기(81)
Related occupations
승강기 설치 및 정비원 · 공업기계 설치 및 정비원 · 보일러 설치 및 정비원 · 농업용·기타 기계장비 설치 및 정비원 · 크레인 및 지게차 설치 및 정비원 · 건설·광업용기계설치 및 정비원
- 자동차 정비원KNOW K000001070
Job outlook: 증가(10%) 현상유지(33%) 감소(57%)
Wages (10,000 KRW): lower(25%) 3.475K average(50%) 4.65K upper(25%) 5.525K
minacross 461 KNOW occupationsmaxJob satisfaction: 68.3
minacross 461 KNOW occupationsmaxDetails ▾▴
Duties
- -자동차의 동력전달장치, 조향장치(자동차의 진행 방향을 바꾸기 위한 장치), 현가장치(차량의 차대 등 프레임에 바퀴를 고정하는 완충장치), 브레이크 등의 제동장치, 타이어 등을 점검하고 교체·수리한다.
- -엔진의 연료장치, 윤활장치, 냉각 장치, 흡기 및 배기 장치 등을 점검하고 부품을 교체한다.
- -각종 전자 장비와 테스터기를 이용해 엔진의 고장 여부를 판단하고 수리.
- -각종 센서, 램프, 배선, 발전기나 전자제어시스템 등 자동차 전기·전자 장치의 이상 유무를 점검하고 수리한다.
- -수리수공기, 용접기, 유압기, 연삭기 등을 사용하여 휘어진 차체를 펴거나 용접하고 교환한다.
- -자동차 표면의 흠집을 없애기 위하여 페인트 및 분무기로 도색한다.
- -자동차를 해체나 시운전을 통해서 자동차의 운행이나 기타 성능상의 문제 등 고장 원인을 찾아낸다.
- -냉각수, 윤활유, 유압, 충전상태 등을 점검하고 낡고 고장 난 부품을 조정하거나 교체하는 등의 사전정비를 한다.
- -자동차의 안전도와 환경검사(배출가스 등)를 실시하고 자동차등록원부와 동일성 여부 등을 확인한다.
See details on KNOW (Korea Employment Information Service) (external site)
Work abilities
장비의 유지(99) · 유연성 및 균형(98) · 물적자원 관리(98) · 청력(98) · 고장의 발견.수리(98)
Knowledge
기계(88) · 운송(86) · 공학과 기술(85) · 고객서비스(77) · 영업과 마케팅(61)
Work environment
비좁은 업무 공간(100) · 오염물질 노출(100) · 질병 혹은 감염 위험 노출(100) · 온몸 진동 노출(100) · 매우 춥거나 더운 기온(100)
Related occupations
항공기 정비원 · 선박 정비원 · 철도기관차 및 전동차 정비원
- 크레인 및 지게차 설치 및 정비원KNOW K000001107
Job outlook: 증가(3%) 현상유지(52%) 감소(44%)
Wages (10,000 KRW): lower(25%) 3.575K average(50%) 4.0K upper(25%) 5.05K
minacross 461 KNOW occupationsmaxJob satisfaction: 68.4
minacross 461 KNOW occupationsmaxDetails ▾▴
Duties
- -크레인을 설치하고 점검 및 수리한다.
- -호이스트를 설치하고 점검 및 수리한다.
- -지게차를 점검 및 정비한다.
- -작업반경, 하중지지력, 인양능력 등을 고려하여 크레인 및 호이스트의 설치위치를 파악한다.
- -시운전을 통해 크레인, 호이스트 및 지게차의 이상 유무를 점검하고, 부품교체, 조정 및 수리, 정비가 필요한 부분을 파악한다.
See details on KNOW (Korea Employment Information Service) (external site)
Work abilities
신체적 강인성(91) · 정교한 동작(90) · 고장의 발견.수리(89) · 반응시간과 속도(88) · 설치(85)
Knowledge
기계(86) · 운송(84) · 공학과 기술(73) · 안전과 보안(65) · 건축 및 설계(58)
Work environment
극단적으로 밝거나 부적절한 조명(100) · 고지대 작업(100) · 비좁은 업무 공간(100) · 위험한 장비 노출(100) · 움직이는 기계(100)
Related occupations
승강기 설치 및 정비원 · 냉동·냉장·공조기 설치 및 정비원 · 공업기계 설치 및 정비원 · 보일러 설치 및 정비원 · 농업용·기타 기계장비 설치 및 정비원 · 건설·광업용기계설치 및 정비원
- 건설·광업용기계설치 및 정비원KNOW K000001211
Job outlook: 증가(7%) 현상유지(52%) 감소(40%)
Wages (10,000 KRW): lower(25%) 3.65K average(50%) 4.5K upper(25%) 5.4K
minacross 461 KNOW occupationsmaxJob satisfaction: 67.5
minacross 461 KNOW occupationsmaxDetails ▾▴
Duties
- -각종 중장비의 시동 순서에 따라 시동을 걸고 시운전하여 엔진의 이상 유무를 점검한다.
- -수공구나 동력공구를 사용하여 연료분사노즐을 빼내고, 압력게이지를 부착한 후 스타트모터를 동작시켜 실린더 압축력을 측정하여 기준과 일치하는지 점검한다.
- -오일, 연료, 작동유, 냉각수 등의 누유상태 및 크랭크마모, 엔진노킹, 밸브간격 등을 확인·점검하고 이상 발견 시 정비한다.
- -전기측정테스터를 사용하여 엔진의 점검부위와 고장부위를 검사한다.
- -라디에이터를 점검·수리한다.
- -배터리 비중을 측정하고, 누전 및 절선상태를 점검하여 이상 부위를 수리한다.
- -스타트모터, 알터테이터(교류발전기), 레귤레이터(조절장치), 램프 등의 작동상태를 확인·점검하여 마모품·손상품을 수리하거나 교체한다.
- -변속기·기어 등을 수공구를 사용하여 분해하고, 마모되거나 절단된 부분을 교체 및 수리한다.
- -트랙의 이완이나 마모상태를 확인하여 정비하고, 휠(wheel)의 균형을 조정한다.
- -트랙류, 롤러류, 시그메트리류 등의 동력전달장치를 정비하여 마모, 절단, 노후화 된 부분을 수리·교체한다.
See details on KNOW (Korea Employment Information Service) (external site)
Work abilities
고장의 발견.수리(97) · 장비의 유지(95) · 장비 선정(90) · 신체적 강인성(84) · 설치(80)
Knowledge
기계(84) · 운송(57) · 공학과 기술(57) · 건축 및 설계(53) · 상품 제조 및 공정(52)
Work environment
비좁은 업무 공간(100) · 온몸 진동 노출(100) · 고지대 작업(99) · 매우 춥거나 더운 기온(99) · 위험한 장비 노출(99)
Related occupations
승강기 설치 및 정비원 · 냉동·냉장·공조기 설치 및 정비원 · 공업기계 설치 및 정비원 · 보일러 설치 및 정비원 · 농업용·기타 기계장비 설치 및 정비원 · 크레인 및 지게차 설치 및 정비원
The KNOW occupations and KECO codes listed here were linked to this page's occupation by this site; this is not a correspondence defined by the Korea Employment Information Service or the Ministry of Employment and Labor.
Projected change: +0.9%
Median wage: $66K
Employment: 41K
Typical entry-level education: High school diploma or equivalent
BLS Employment Projections 2025–35 (SOC 49-9044 occupational group)
Details ▾▴
Employment: 2025 41K → 2035 41K
Median annual wage (exact): $65,700
BLS occupational group: Millwrights