목수

건설, 유지보수 및 수리

AI 노출도

  • 데이터 출처: BLS발행 시점: 2026-08

    낮음· 상대

    낮음4단계 상대 범주매우 높음

    직업군 단위 값

    척도 · 모수 · 출처

    4단계 상대 범주 (낮음 / 보통 / 높음 / 매우 높음)

    BLS 고용전망 표의 세부직업 831개 기준. 값은 NEM(전국고용매트릭스) 코드 단위로 부여되므로, 같은 NEM 코드를 쓰는 직업은 같은 밴드를 받습니다

    원천 데이터셋 (XLSX 파일 내려받기)

  • 데이터 출처: Anthropic발행 시점: 2026-03

    0.000

    0.000여기 실린 값의 범위0.745
    척도 · 모수 · 출처

    관측 노출 지수, 발행된 그대로 0–1

    O*NET 과업 매핑 기준

    원천 데이터셋

  • 데이터 출처: ILO발행 시점: 2025

    0.13

    0.09여기 실린 값의 범위0.70

    직업군 단위 값

    척도 · 모수 · 출처

    생성형 AI 노출 지수, 발행된 그대로 0–1

    ISCO-08 직업군 단위 — 같은 코드를 쓰는 직업은 모두 같은 값

    본 사이트 산출이며 ILO가 발행한 수치가 아닙니다. 본 사이트가 ILO 데이터셋에 연결한 직업 1,012개 가운데 이 값 이상인 직업이 97%입니다.

    원천 데이터셋

이 원천이 어떤 종류의 값인가

BLS 범주는 절대 수준이 아니라 상대 순위이며, 1차 측정도 아닙니다. 여러 선행 연구가 매긴 직업별 백분위 순위를 4단계로 묶은 값입니다. 고용·임금 예측도, 도입 확률도 아니며 자동화와 증강을 구분하지 않습니다.

작업별 노출도

노출된 작업만
작업Claude.ai원천값 / 비중 %
페인트·수공구·패널을 사용해 주택이나 건물의 목공부나 벽판 표면을 마감한다.

Finish surfaces of woodwork or wallboard in houses or buildings, using paint, hand tools, or paneling.

47-2031

0.002129.2
고객이나 고용주를 위한 비용 산정서를 작성한다.

Prepare cost estimates for clients or employers.

47-2031

0.002027.8
볼트·못·나사를 사용해 구조물의 목재나 금속 골조를 짜기 위해 자재를 조립하고 고정한다.

Assemble and fasten material together to construct wood or metal framework of structure, using bolts, nails, or screws.

47-2031

0.001622.2
수공구와 나사못·못·목재 다월·접착제를 사용해 골조나 소품을 만들기 위해 자재를 조립하고 고정한다.

Assemble and fasten materials to make frameworks or props, using hand tools and wood screws, nails, dowel pins, or glue.

47-2031

0.001520.8
모든 표면에서 관측 없음 33건 — 원천에 해당 릴리스 행이 없는 태스크입니다. 비중 0은 표시 단계의 구성비이고, 부재는 원천값 칸의 —가 나타냅니다.
자·연필·분필·금긋기 게이지를 사용해 자재에 절단선을 측정해 표시한다.

Measure and mark cutting lines on materials, using a ruler, pencil, chalk, and marking gauge.

—0
정해진 안전 수칙과 규정을 따르고 안전하고 깨끗한 환경을 유지한다.

Follow established safety rules and regulations and maintain a safe and clean environment.

—0
다림추와 수평기를 사용해 구조물이 곧은지 검증한다.

Verify trueness of structure, using plumb bob and level.

—0
수공구·기계·전동 톱으로 자재를 지정된 치수에 맞게 성형하거나 절단한다.

Shape or cut materials to specified measurements, using hand tools, machines, or power saws.

—0
프로젝트 배치도를 작성하고 필요한 치수와 자재를 결정하기 위해 도면·스케치·건축 계획의 사양을 검토한다.

Study specifications in blueprints, sketches, or building plans to prepare project layout and determine dimensions and materials required.

—0
목공 기계·목수용 수공구·전동 공구를 사용해 건물에 쓰이는 캐비닛·문·골조·바닥과 그 밖의 목재 설비를 제작하거나 수리한다.

Build or repair cabinets, doors, frameworks, floors, or other wooden fixtures used in buildings, using woodworking machines, carpenter's hand tools, or power tools.

—0
지상보다 높은 곳에서 구조물을 조립하려고 비계나 사다리를 세운다.

Erect scaffolding or ladders for assembling structures above ground level.

—0
수공구를 사용해 손상되거나 결함이 있는 부품이나 구조물 구간을 제거하고 수리하거나 교체한다.

Remove damaged or defective parts or sections of structures and repair or replace, using hand tools.

—0
목공용 수공구나 전동 공구를 사용해 창·틀·바닥재·몰딩·철물 같은 구조물이나 고정물을 설치한다.

Install structures or fixtures, such as windows, frames, floorings, trim, or hardware, using carpenters' hand or power tools.

—0
목재나 그 밖에 필요한 자재를 선정해 주문한다.

Select and order lumber or other required materials.

—0
기록을 관리하고 조치를 기록하며 서면 경과 보고서를 발표한다.

Maintain records, document actions, and present written progress reports.

—0
난방이나 전기 배선 작업 같은 특수 분야를 맡을 하도급업체를 섭외한다.

Arrange for subcontractors to deal with special areas, such as heating or electrical wiring work.

—0
파손되거나 손상된 구조를 찾아내려고 천장 타일이나 바닥 타일·벽 마감재·외벽재·유리·목공부를 점검한다.

Inspect ceiling or floor tile, wall coverings, siding, glass, or woodwork to detect broken or damaged structures.

—0
습기를 막기 위해 밑바닥을 건축용 방수지로 덮고, 바닥재를 밑바닥에 못으로 고정하거나 마스틱이나 아스팔트 바탕에 접착해 원목·쪽매널·목재 블록 바닥을 시공한다.

Cover subfloors with building paper to keep out moisture and lay hardwood, parquet, or wood-strip-block floors by nailing floors to subfloor or cementing them to mastic or asphalt base.

—0
보수용 플라스터·흙손·사포 공구를 사용해 플라스터나 석고보드의 균열이나 그 밖의 결함을 메우고 보수 부위를 사포질한다.

Fill cracks or other defects in plaster or plasterboard and sand patch, using patching plaster, trowel, and sanding tool.

—0
간단한 배관·용접·콘크리트 혼합 작업을 수행한다.

Perform minor plumbing, welding, or concrete mixing work.

—0
천장이나 벽에 충격 흡수용·방음용·장식용 패널을 붙인다.

Apply shock-absorbing, sound-deadening, or decorative paneling to ceilings or walls.

—0
유해 물질을 다루거나 제거한다.

Work with or remove hazardous material.

—0
콘크리트 타설용 거푸집이나 슈트를 제작한다.

Construct forms or chutes for pouring concrete.

—0
Study blueprints and diagrams to determine dimensions of structure or form to be constructed.
—0
Measure materials or distances, using square, measuring tape, or rule to lay out work.
—0
Cut or saw boards, timbers, or plywood to required size, using handsaw, power saw, or woodworking machine.
—0
못·볼트·앵커 로드·강선·판재·쐐기·목재를 사용해 거푸집과 그 밖의 구조물을 제자리에 고정하고 지지한다.

Anchor and brace forms and other structures in place, using nails, bolts, anchor rods, steel cables, planks, wedges, and timbers.

—0
Mark cutting lines on materials, using pencil and scriber.
—0
Erect forms, framework, scaffolds, hoists, roof supports, or chutes, using hand tools, plumb rule, and level.
—0
시공이나 보수 중인 구조물에 문과 창의 거친 틀·바탕 바닥·고정물·임시 지지대를 설치한다.

Install rough door and window frames, subflooring, fixtures, or temporary supports in structures undergoing construction or repair.

—0
수공구·너트·볼트를 사용해 구조용 목재와 지지재의 부식을 조사하고, 필요에 따라 목재를 교체한다.

Examine structural timbers and supports to detect decay, and replace timbers as required, using hand tools, nuts, and bolts.

—0
전동 드릴로 목재·조적·콘크리트 벽에 볼트 구멍을 뚫는다.

Bore boltholes in timber, masonry or concrete walls, using power drill.

—0
작업 기록을 관리하고 작업반 일정을 짠다.

Maintain job records and schedule work crew.

—0
Fabricate parts, using woodworking and metalworking machines.
—0
구조물을 지지하도록 기둥 구멍을 파거나 그 굴착을 총괄하고 기둥을 세운다.

Dig or direct digging of post holes and set poles to support structures.

—0
숲을 통해 캠프 건물과 기계를 끌어 옮기는 데 쓸 썰매를 통나무와 목재로 만든다.

Build sleds from logs and timbers for use in hauling camp buildings and machinery through wooded areas.

—0
Build chutes for pouring concrete.
—0

데이터 출처·라이선스 — O*NET®, Anthropic Economic Index, Eloundou et al. (2023): 상세 고지는 크레딧 및 출처 페이지 참조

직업 정보