섬유 편직·제직 기계 세팅원, 조작원 및 관리원

생산직

Textile Knitting and Weaving Machine Setters, Operators, and Tenders

O*NET-SOC 코드
51-6063.00

Set up, operate, or tend machines that knit, loop, weave, or draw in textiles.

  • 데이터 출처: BLS발행 시점: 2026-08

    보통· 상대

    낮음4단계 상대 범주매우 높음

    직업군 단위 값

    척도 · 모수 · 출처

    4단계 상대 범주 (낮음 / 보통 / 높음 / 매우 높음)

    BLS 고용전망 표의 세부직업 831개 기준. 값은 NEM(전국고용매트릭스) 코드 단위로 부여되므로, 같은 NEM 코드를 쓰는 직업은 같은 밴드를 받습니다

    원천 데이터셋 (XLSX 파일 내려받기)

  • 데이터 출처: Anthropic발행 시점: 2026-03

    0.032

    0.000여기 실린 값의 범위0.745
    척도 · 모수 · 출처

    관측 노출 지수, 발행된 그대로 0–1

    O*NET 작업 매핑 기준

    SOC 2018 직업 단위로 발행된 값이며, 같은 SOC 2018 코드를 가진 O*NET 직업은 모두 이 값을 받습니다

    원천 데이터셋 (CSV 파일 내려받기)

  • 데이터 출처: ILO발행 시점: 2025

    0.16

    0.09여기 실린 값의 범위0.70

    직업군 단위 값

    척도 · 모수 · 출처

    생성형 AI 노출 지수, 발행된 그대로 0–1

    ISCO-08 직업군 단위로 발행된 값입니다. 미국 노동통계국(BLS)의 공식 교차표(ISCO-08→2010 SOC, 2010 SOC→2018 SOC)를 그대로 적용해 이 직업에 연결했으며, 연결은 전부 또는 일부 대응입니다

    원천 데이터셋 (PDF 파일 내려받기)

이 원천이 어떤 종류의 값인가

BLS 범주는 절대 수준이 아니라 상대 순위이며, 1차 측정도 아닙니다. 여러 선행 연구가 매긴 직업별 백분위 순위를 4단계로 묶은 값입니다. 고용·임금 예측도, 도입 확률도 아니며 자동화와 증강을 구분하지 않습니다.

작업별 노출도

노출된 작업만

평가 작업 20개 · β ≥ 0.5 인 작업 4개 (20.0%)

β = 직접 노출(E1) + 0.5 × 도구 활용 시 노출(E2). 원본 저장소의 정의를 따릅니다.

  • 원천 단위: O*NET 27.2 작업 → O*NET 31.0 직업 코드
  • 채점된 작업 중 1개는 O*NET 31.0 작업 목록에 없어, O*NET 27.2 기준으로 공표된 점수를 그대로 둡니다.
출처
OpenAI "GPTs are GPTs" exposure rubric
판
gh-main-0471612
라이선스
MIT License, Copyright (c) 2024 OpenAI
작업 (O*NET 20.1)Claude.ai원천값 / 비중 %
전자 장비를 프로그래밍한다.

Program electronic equipment.

51-6063.00

0.1373100.0
모든 표면에서 관측 없음 19건 — 원천에 해당 릴리스 행이 없는 작업입니다. 비중 0은 표시 단계의 구성비이고, 부재는 원천값 칸의 —가 나타냅니다.
Remove defects in cloth by cutting and pulling out filling.
—0
Inspect products to ensure that specifications are met and to determine if machines need adjustment.
—0
Observe woven cloth to detect weaving defects.
—0
Thread yarn, thread, and fabric through guides, needles, and rollers of machines for weaving, knitting, or other processing.
—0
Examine looms to determine causes of loom stoppage, such as warp filling, harness breaks, or mechanical defects.
—0
Notify supervisors or repair staff of mechanical malfunctions.
—0
Set up, or set up and operate textile machines that perform textile processing and manufacturing operations such as winding, twisting, knitting, weaving, bonding, or stretching.
—0
Start machines, monitor operations, and make adjustments as needed.
—0
Inspect machinery to determine whether repairs are needed.
—0
Record information about work completed and machine settings.
—0
주문·프로세스·문제에 관한 정보를 수집하기 위해 동료와 협의한다.

Confer with co-workers to obtain information about orders, processes, or problems.

—0
Stop machines when specified amounts of product have been produced.
—0
Clean, oil, and lubricate machines, using air hoses, cleaning solutions, rags, oil cans, or grease guns.
—0
Operate machines for test runs to verify adjustments and to obtain product samples.
—0
Wash and blend wool, yarn, or cloth.
—0
Study guides, loom patterns, samples, charts, or specification sheets, or confer with supervisors or engineering staff to determine setup requirements.
—0
Repair or replace worn or defective needles and other components, using hand tools.
—0
Install, level, and align machine components such as gears, chains, guides, dies, cutters, or needles to set up machinery for operation.
—0
Adjust machine heating mechanisms, tensions, and speeds to produce specified products.
—0

데이터 출처·라이선스 — O*NET®, Anthropic Economic Index, Eloundou et al. (2023): 상세 고지는 크레딧 및 출처 페이지 참조

O*NET 31.0 작업 전체 (19개)

이 직업의 O*NET 31.0 작업 전체(영문 원문, 유형 핵심·보조). 노출값은 이 목록에 싣지 않으며, 위 표에서 각 원천이 사용한 O*NET 판의 문면 옆에 있습니다.

작업 (O*NET 31.0)유형
Remove defects in cloth by cutting and pulling out filling.핵심
Inspect products to ensure that specifications are met and to determine if machines need adjustment.핵심
Observe woven cloth to detect weaving defects.핵심
Thread yarn, thread, and fabric through guides, needles, and rollers of machines for weaving, knitting, or other processing.핵심
Examine looms to determine causes of loom stoppage, such as warp filling, harness breaks, or mechanical defects.핵심
Notify supervisors or repair staff of mechanical malfunctions.핵심
Start machines, monitor operations, and make adjustments as needed.핵심
Inspect machinery to determine whether repairs are needed.핵심
Confer with co-workers to obtain information about orders, processes, or problems.핵심
Stop machines when specified amounts of product have been produced.핵심
Operate machines for test runs to verify adjustments and to obtain product samples.핵심
Set up, or set up and operate textile machines that perform textile processing and manufacturing operations such as winding, twisting, knitting, weaving, bonding, or stretching.보조
Record information about work completed and machine settings.보조
Clean, oil, and lubricate machines, using air hoses, cleaning solutions, rags, oil cans, or grease guns.보조
Program electronic equipment.보조
Study guides, loom patterns, samples, charts, or specification sheets, or confer with supervisors or engineering staff to determine setup requirements.보조
Repair or replace worn or defective needles and other components, using hand tools.보조
Install, level, and align machine components such as gears, chains, guides, dies, cutters, or needles to set up machinery for operation.보조
Adjust machine heating mechanisms, tensions, and speeds to produce specified products.보조

직업 정보

고용 전망 (BLS)

고용, 2025
14K
고용 전망, 2035
12K
변화율 (2025–35)
-13.7%
연간 임금 중위값, 2025
$39,530
진입 시 일반적 학력
High school diploma or equivalent
최저 $30,890BLS EP 2025–35 세부 직업 825개 중위임금 범위최고 $559,030

출처: U.S. Bureau of Labor Statistics, Employment Projections 2025–35 — Employment by detailed occupation, 2025 and projected 2035

한국 직업분류 연결 (KSCO)

AI Changing Work가 만든 한국 직업분류 직결표 v1.1 현행 판의 연결입니다. 관계 값은 O*NET-SOC 직업 쪽에서 읽습니다.

KSCO 코드KSCO 명칭관계상태
82211제직기 조작원이 직업이 더 넓음확정
82212편직기 조작원이 직업이 더 넓음확정
82219그 외 직조기 및 편직기 조작원이 직업이 더 넓음확정
82299그 외 직물·신발 관련 기계 조작원관련(대응 아님)확정

아래 KNOW 직업은 AI Changing Work가 위 표의 KSCO 세세분류에서 한국고용직업분류를 거쳐 분류 코드로 이은 것입니다. 묶음마다 한 분류 칸에 속한 KNOW 직업을 모두 보여 주며, 여러 KSCO 세세분류가 같은 칸으로 이어지면 한 번만 싣습니다. 한국고용정보원이 정한 대응 관계가 아니며, 이 직업과 같은 일이라는 뜻도 아닙니다.

출처: 한국고용정보원 워크넷 직업정보(KNOW) · 공공누리 제4유형

KSCO 82211·82212·82219 에서 이어짐

  • 표백 및 염색기 조작원

    임금(만원): 하위(25%) 3.2K 평균(50%) 3.8K 상위(25%) 4.25K

    일자리 전망: 증가(0%) 현상유지(10%) 감소(90%)

    직업만족도: 59.6

    수행직무
    • -표백을 위해 기계의 공급대 또는 선반대에 천을 배치한 후 기계의 압력과 속도를 조절한다.
    • -천이 기계 안으로 투입되는 것을 관찰하며 잘못된 이음매나 흠을 찾는다.
    • -처리된 직물의 표백상태를 점검한다.
    • -생산품목의 지시된 색상과 수량이 염색처방 및 작업공정과 일치하는지 작업카드를 확인한다.
    • -염색을 위해 기계의 공급대에 천을 배치한 후 기계를 작동시켜 일정한 온도 및 습도에서 염색한다.
    • -염색 과정을 관찰하여 염색 상태가 불량할 경우 필요한 조치를 취한다.
    • -염색이 완료된 후 피염물을 씻고, 탈수 및 건조시킨다.
    • -생산과정·품목수·가동시간·천의 길이 등을 작업표에 기록한다.
    • -염료패드에서 사용한 염료를 폐수처리장으로 이송한다.
  • 섬유 제조기계 조작원(방적,방사,연사,합사,권사기등)

    임금(만원): 하위(25%) 3.3K 평균(50%) 3.65K 상위(25%) 4.0K

    일자리 전망: 증가(7%) 현상유지(40%) 감소(52%)

    직업만족도: 58.5

    수행직무
    • -섬유에 일정한 혼합물을 결합하는 기계를 조작한다.
    • -천연섬유를 청결히 하고 솜털같이 하며, 소모를 소모뭉치로 또는 소모뭉치를 리본뭉치로 결합하고, 규정의 품질과 무게를 가진 하나의 가늘게 만든 가닥으로 몇 개의 소모를 결합하는 즉 방적하는 기계를 조작한다.
    • -슬라이버(면 섬유의 다발)를 로빙(거친 실 단위)으로 전환하는 조방기 또는 정방기를 조작한다.
    • -로빙으로부터 연사)와 방사를 방적하고, 실꾸리에 두 가닥 이상의 연사를 감고 두 가닥 이상의 방사나 연사를 한 가닥보다 무겁고 강한 가닥으로 꼬거나 한 타래에서 다른 타래로 방사나 연사를 권사하는 기계를 조작한다.
  • 직조기 및 편직기 조작원

    임금(만원): 하위(25%) 3.0K 평균(50%) 3.2K 상위(25%) 3.6K

    일자리 전망: 증가(3%) 현상유지(37%) 감소(60%)

    직업만족도: 58.1

    수행직무
    • -원사의 종류, 제조직물의 조직과 무늬에 대한 명세서를 검토한다.
    • -소정의 밀도와 올수에 맞추어 경사를 정경 비임에 감는다.
    • -실의 강도를 높이고 제직 중 마찰로 인한 끊어짐을 방지하기 위하여 실에 풀을 입히는 호부기를 조정, 조작한다.
    • -준비된 경사를 통경대에서 종광과 바디에 한가닥씩 끼우고, 두 사람이 마주 앉아 통경바늘을 사용하여 꿴다.
    • -위사용 원사를 목관에 감고 직기에 공급한다.
    • -직기를 가동하고 직물의 무늬, 무게, 속도 등 제반조건을 확인하고, 끊어진 실을 연결하며, 기계의 기능장애를 점검, 조정한다.
    • -경사를 다 사용하면 남은 부분과 새로운 빔을 연결한다.

한국고용정보원 직업정보(KNOW)에서 상세 확인 (외부 사이트)

출처: 한국고용정보원 워크넷 직업정보(KNOW) · 공공누리 제4유형

KSCO 82299 에서 이어짐

  • 신발 제조기계 조작원

    임금(만원): 하위(25%) 3.0K 평균(50%) 3.25K 상위(25%) 4.0K

    일자리 전망: 증가(17%) 현상유지(20%) 감소(63%)

    직업만족도: 58.3

    수행직무
    • -기계의 작동·조정 및 유지조건을 숙지한다
    • -캐드를 이용하여 신발 디자인을 그린다.
    • -작업지시서를 살펴 분할할 가죽 부분품의 두께를 숙지하고, 기계를 작동시켜 자른다.
    • -생고무를 고열압축 성형하는 기계를 이용하여 신발창을 만든다.
    • -컨베이어 위의 신발을 양손으로 잡고 그라인더에 갖다 대 규정된 모양이나 규격으로 갈아내거나 깎아낸다.
    • -겉창을 사출기에서 제조하는 방식의 경우에는 겉창 가장자리를 트리밍기의 칼날에 대고 겉창의 형태대로 오려낸다.
    • -안피와 겉피를 부착하고 앞 골을 씌우고 건조시켜 고정시킨 후에 고무 밑창을 접착시킨다.
    • -신발제조기계를 조립하고 필요할 경우 수리를 하기도 한다.
  • 제화원

    임금(만원): 하위(25%) 3.3K 평균(50%) 3.8K 상위(25%) 4.025K

    일자리 전망: 증가(0%) 현상유지(30%) 감소(70%)

    직업만족도: 63.1

    수행직무
    • -고객과 디자인 등에 대하여 상담한다.
    • -발치수를 재고 치수별, 디자인별로 구두골을 선택한다.
    • -가죽 위에 본을 놓고 연필로 그린다.
    • -갑피의 겉감, 안감창감을 기계나 손칼·가위 등으로 재단한다.
    • -겉감과 안감의 꿰맬 부위를 칼로 얇게 깎아 접고 가죽재봉틀로 꿰맨다.
    • -골과 중창을 붙이기 위해 못을 박는다.
    • -갑피를 구두골에 씌우고 갑피집게로 못을 박거나 철사로 얽어 고정한다.
    • -갑피와 창을 기계 또는 손으로 꿰맨다.
    • -굽을 달고 굽창에 못을 박는다.
    • -사포로 문지르고 인두로 윤을 낸다.
    • -구두에서 구두골을 뺀 다음 망치로 다듬질한다.
    • -필요한 곳에 잉크·왁스·물감 등을 바르고 구두약을 발라 광택을 낸다.
  • 세탁 기계 조작원

    임금(만원): 하위(25%) 3.0K 평균(50%) 3.5K 상위(25%) 4.0K

    일자리 전망: 증가(17%) 현상유지(40%) 감소(43%)

    직업만족도: 54.8

    수행직무
    • -고객으로부터 의뢰 받은 세탁물을 옷감의 종류에 따라 분류한다.
    • -세탁물의 정확한 세탁법과 세탁기계 사용법을 숙지한다.
    • -구분된 세탁물을 물과 세제를 사용하여 물세탁을 한 후 건조기를 사용하여 건조하거나 유기용제를 사용하여 드라이크리닝 한다.
    • -드라이크리닝 시에는 유기용제의 농도 등을 고려하여 드라이크리닝기를 조작하여 세탁한다.
    • -연속식 세탁기(터널세탁기)라고 불리는 대형세탁기에 세탁물을 주기적으로 투입한다.
    • -세탁물의 강도나 때의 농도에 따라 세탁시간을 조정하고 세제량을 조절한다.
    • -세탁물에 따라 얼룩을 빼거나 특수처리를 한다.
    • -세탁이 완료 된 후에는 세탁물의 상태를 확인하고 다림질 한 후에 정리한다.
    • -주기적으로 세탁기계 상태를 점검하고 청소한다.

한국고용정보원 직업정보(KNOW)에서 상세 확인 (외부 사이트)

관계·상태 정의(kr-direct v1.1)

ILO(국제노동기구) 직업설명

아래 ISCO-08 직업군은 AI Changing Work가 미국 노동통계국(BLS)이 발행한 교차표(2018 SOC→2010 SOC, 2010 SOC→ISCO-08)를 사례별 선택 없이 그대로 적용해 이 직업에 연결한 것입니다. 연결은 전부 또는 일부 대응일 수 있습니다.

  • ISCO-08 8152Weaving and Knitting Machine Operators

    직조기 및 편직기 조작원

출처: 본 저작물은 '국가데이터처'에서 2026년 작성하여 공공누리 제3유형(출처표시-변경금지)으로 개방한 '한국표준직업분류(KSCO 8차)-국제표준직업분류(ISCO-08) 연계표'를 이용하였으며, 해당 저작물은 '국가데이터처 통계분류포털, https://kssc.mods.go.kr'에서 무료로 다운받으실 수 있습니다. 원문을 변경하지 않고 그대로 인용하였습니다.

원문 보기

출처: ILO ISCO-08 · KSCO 명칭: 국가데이터처 연계표 — 상세: 크레딧 및 출처

ESCO 직업 어휘

아래 각 항목은 공개된 ESCO-O*NET 크로스워크(버전 1, 2022)에서 이 직업과 하나씩 대응된 것입니다. 대응 유형은 그 크로스워크의 것이고, 표현은 AI Changing Work의 것입니다.

  • carpet weaverESCO 7318.2이 직업이 더 넓음

    Carpet weavers operate machinery to create textile floor coverings. They create carpets and rugs from wool or synthetic textiles using specialised equipment. Carpet weavers can use diverse methods such as weaving, knotting or tufting to create carpets of different styles.

  • knitting machine operatorESCO 8152.1이 직업이 더 넓음

    Knitting machine operators set up, operate and monitor knitting machines. They work with specialised machinery, techniques and materials to process threads of yarn into knitted products such as clothing, carpets or rope. They maintain and repair knitting machinery and ensure operations run without problems.

  • knitting textile technicianESCO 8152.1.2이 직업이 더 넓음

    Knitting textile technicians perform operations related to setting up knitting processes. They may work in weft or warp knitting factories, using digital information technology (CAD) for patterning. They work in cooperation with the physical laboratory technicians in order to ensure error free knitted fabrics. They are responsible for highest productivity rates.

  • tufting operatorESCO 8152.3.1이 직업이 더 넓음

    Tufting operators supervise the tufting process of a group of machines, monitoring fabric quality and tufting conditions. They inspect tufting machines after set up, start up, and during production to ensure the product being tufted meets specs and quality standards.

  • weaving machine operatorESCO 8152.3이 직업이 더 넓음

    Weaving machine operators set up, operate and monitor weaving machines .They work with specialised machinery, techniques and materials to process threads of yarn into weaved products such as clothing, home-tex or technical end products. They maintain and repair weaving machinery and ensure operations run without problems.

  • weaving machine supervisorESCO 8152.3.2이 직업이 더 넓음

    Weaving machine supervisors monitor the weaving process. They operate the weaving process at automated machines (from silk to carpet, from flat to Jacquard). They monitor fabric quality and condition of mechanical machines such as woven fabrics for clothing, home-tex or technical end uses. They carry out maintenance works on machines that convert yarns into fabrics such as blankets, carpets, towels and clothing material. They repair loom malfunctions as reported by the weaver, and complete loom check out sheets.

  • weaving textile technicianESCO 8152.3.3이 직업이 더 넓음

    Weaving textile technicians perform operations related to setting up weaving processes.

  • knitterESCO 7318.4겹침(같지 않음)

    Knitters create textiles or fabric by knitting pieces of yarn. They use traditional techniques to create interlocking loops of yarn which form a uniform piece of fabric. Knitters use different techniques, needles and yarn materials to create knitted materials of diverse proportions.

  • knitting machine supervisorESCO 8152.1.1겹침(같지 않음)

    Knitter supervisors supervise the knitting process of a group of machines, monitoring fabric quality and knitting conditions. They inspect knitting machines after set up, start up and during production to ensure that the product being knit meets specifications and quality standards.

  • weaverESCO 7318.6겹침(같지 않음)

    Weavers operate the weaving process at traditional hand powered weaving machines (from silk to carpet, from flat to Jacquard). They monitor fabric quality and condition of machines such as woven fabrics for clothing, home-tex or technical end uses. They carry out  mechanic works on machines that convert yarns into fabrics such as blankets, carpets, towels and clothing material. They repair loom malfunctions as reported by the weaver, and complete loom check out sheets.

출처: European Commission, DG EMPL — ESCO API 2026-08-08 (bridge v1.2.1)

라이선스: CC BY 4.0 (EU Reuse Notice)

원문 보기

ESCO 재이용 조건과 수정 고지는 크레딧 및 출처에 있습니다.

프랑스 직업분류 연결 (ROME)

이 직업과 ROME 4.0 직업(fiche)을 AI Changing Work가 AI 모델로 판정해 이은 연결입니다. 관계 값은 이 직업 쪽에서 읽습니다. 「잠정」 표시 연결은 같은 모델 계열(Claude)의 두 판단자 판정만으로, 또는 그 판정에 운영자 규칙을 적용해 채택한 연결이라 확정 연결보다 근거가 약합니다.

ROME 코드ROME 명칭 (프랑스어)관계
H2403Conducteur / Conductrice de machines de fabrication de produits textiles범위 같음
H2413Noueur / Noueuse de chaîne de tissage이 직업이 더 넓음
H2419Passementier / Passementière이 직업이 더 넓음
H2425Fileur / Fileuse en industrie textile관련(대응 아님)잠정

Source: France Travail — Répertoire Opérationnel des Métiers et des Emplois (ROME 4.0), version 61, last updated 15 June 2026 (https://www.data.gouv.fr/datasets/repertoire-operationnel-des-metiers-et-des-emplois-rome). Licence Ouverte 2.0.

ROME codes and titles are reproduced unchanged; the links to O*NET-SOC occupations are AI Changing Work's own judgment and are not a France Travail correspondence.

(AI Changing Work link release: fr-direct v1)

스페인 직업분류 연결 (CNO-11)

이 직업과 CNO-11 직업을 AI Changing Work가 AI 모델로 판정해 이은 연결입니다. 관계 값은 이 직업 쪽에서 읽습니다.

CNO-11 코드CNO-11 명칭 (스페인어)관계
8152Operadores de telares y otras máquinas tejedoras범위 같음

출처: 스페인 국립통계청(INE), 국가직업분류 2011(CNO-11, 왕령 1591/2010) — www.ine.es · CC BY 4.0. CNO-11 코드와 스페인어 직업명은 변경 없이 표시하며, O*NET 직업과의 연결은 AI Changing Work 자체 판단으로 INE의 대응표가 아닙니다.

(AI Changing Work link release: es-direct v1)

독일 직업분류 연결 (KldB)

이 직업과 KldB 직업을 AI Changing Work가 AI 모델로 판정해 이은 연결입니다. 관계 값은 이 직업 쪽에서 읽습니다.

KldB 코드KldB 명칭 (독일어)관계
28122Berufe in der Textilherstellung - fachlich ausgerichtete Tätigkeiten범위 같음
28102Berufe in der Textiltechnik (ohne Spezialisierung) - fachlich ausgerichtete Tätigkeiten겹침(같지 않음)잠정
28101Berufe in der Textiltechnik (ohne Spezialisierung) - Helfer-/Anlerntätigkeiten관련(대응 아님)

출처: © Statistik der Bundesagentur für Arbeit — Klassifikation der Berufe 2010 – überarbeitete Fassung 2020, https://statistik.arbeitsagentur.de. KldB 코드와 직업명은 변경 없이 표시하며, O*NET 직업과의 연결은 AI Changing Work 자체 매핑(eigene Zuordnung)으로 연방고용청의 대응표가 아닙니다.

(AI Changing Work link release: de-direct v1)

일본 직업분류 연결 (JSCO)

이 직업과 JSCO 직업을 AI Changing Work가 AI 모델로 판정해 이은 연결입니다. 관계 값은 이 직업 쪽에서 읽습니다.

JSCO 코드JSCO 명칭 (일본어)관계
505紡織・衣服・繊維製品生産設備制御・監視員겹침(같지 않음)
535紡織・衣服・繊維製品製造従事者관련(대응 아님)

출처: 일본 총무성, 일본표준직업분류(2009년 12월, 총무성 고시 제555호). JSCO 코드와 일본어 직업명은 변경 없이 표시하며, O*NET 직업과의 연결은 AI Changing Work 자체 판단으로 총무성의 대응표가 아닙니다.

(AI Changing Work link release: jp-direct v1)

이 페이지의 데이터 출처·라이선스와 AI Changing Work의 수정·번역 고지: 크레딧 및 출처