석유 펌프 시스템 운전원, 정유 공장 운전원 및 검량원
생산직Petroleum Pump System Operators, Refinery Operators, and Gaugers
- O*NET-SOC 코드
- 51-8093.00
Operate or control petroleum refining or processing units. May specialize in controlling manifold and pumping systems, gauging or testing oil in storage tanks, or regulating the flow of oil into pipelines.
- 데이터 출처: BLS발행 시점: 2026-08
보통· 상대
낮음4단계 상대 범주매우 높음직업군 단위 값
척도 · 모수 · 출처
4단계 상대 범주 (낮음 / 보통 / 높음 / 매우 높음)
BLS 고용전망 표의 세부직업 831개 기준. 값은 NEM(전국고용매트릭스) 코드 단위로 부여되므로, 같은 NEM 코드를 쓰는 직업은 같은 밴드를 받습니다
- 데이터 출처: Anthropic발행 시점: 2026-03
0.041
0.000여기 실린 값의 범위0.745척도 · 모수 · 출처
관측 노출 지수, 발행된 그대로 0–1
O*NET 작업 매핑 기준
SOC 2018 직업 단위로 발행된 값이며, 같은 SOC 2018 코드를 가진 O*NET 직업은 모두 이 값을 받습니다
- 데이터 출처: ILO발행 시점: 2025
0.29
0.09여기 실린 값의 범위0.70직업군 단위 값
척도 · 모수 · 출처
생성형 AI 노출 지수, 발행된 그대로 0–1
ISCO-08 직업군 단위로 발행된 값입니다. 미국 노동통계국(BLS)의 공식 교차표(ISCO-08→2010 SOC, 2010 SOC→2018 SOC)를 그대로 적용해 이 직업에 연결했으며, 연결은 전부 또는 일부 대응입니다
이 원천이 어떤 종류의 값인가
BLS 범주는 절대 수준이 아니라 상대 순위이며, 1차 측정도 아닙니다. 여러 선행 연구가 매긴 직업별 백분위 순위를 4단계로 묶은 값입니다. 고용·임금 예측도, 도입 확률도 아니며 자동화와 증강을 구분하지 않습니다.
작업별 노출도
노출된 작업만평가 작업 24개 · β ≥ 0.5 인 작업 9개 (37.5%)
β = 직접 노출(E1) + 0.5 × 도구 활용 시 노출(E2). 원본 저장소의 정의를 따릅니다.
- 원천 단위: O*NET 27.2 작업 → O*NET 31.0 직업 코드
- 채점된 작업이 모두 O*NET 31.0 작업 목록에 있습니다.
- 출처
- OpenAI "GPTs are GPTs" exposure rubric
- 판
- gh-main-0471612
- 라이선스
- MIT License, Copyright (c) 2024 OpenAI
| 작업 (O*NET 20.1) | Claude.ai원천값 / 비중 % | API원천값 / 비중 % |
|---|---|---|
표준 공식을 사용해 테스트 결과 값을 계산한다.Calculate test result values, using standard formulas. 51-8093.00 | 0.0041100.0 | 0.00238.9 |
운전 데이터·계기 판독값·문서·실험실 분석 결과를 기록하고 취합한다.Record and compile operating data, instrument readings, documentation, and results of laboratory analyses. | —0 | 0.023891.1 |
| 모든 표면에서 관측 없음 22건 — 원천에 해당 릴리스 행이 없는 작업입니다. 비중 0은 표시 단계의 구성비이고, 부재는 원천값 칸의 —가 나타냅니다. | ||
Monitor process indicators, instruments, gauges, and meters to detect and report any possible problems. | —0 | —0 |
Start pumps and open valves or use automated equipment to regulate the flow of oil in pipelines and into and out of tanks. | —0 | —0 |
Control or operate manifold and pumping systems to circulate liquids through a petroleum refinery. | —0 | —0 |
Operate control panels to coordinate and regulate process variables such as temperature and pressure, and to direct product flow rate, according to process schedules. | —0 | —0 |
Signal other workers by telephone or radio to operate pumps, open and close valves, and check temperatures. | —0 | —0 |
들어오고 나가는 제품이 올바른 계량기를 거치는지, 계량기가 제대로 작동하는지 검증한다.Verify that incoming and outgoing products are moving through the correct meters, and that meters are working properly. | —0 | —0 |
Read automatic gauges at specified intervals to determine the flow rate of oil into or from tanks, and the amount of oil in tanks. | —0 | —0 |
Operate auxiliary equipment and control multiple processing units during distilling or treating operations, moving controls that regulate valves, pumps, compressors, and auxiliary equipment. | —0 | —0 |
Plan movement of products through lines to processing, storage, and shipping units, using knowledge of system interconnections and capacities. | —0 | —0 |
요구되는 품질과 수량의 제품을 생산하도록 장비 제어를 어떻게 설정할지 결정하기 위해 사양·일정·기록지·테스트 결과·실험실 권고를 읽고 분석한다.Read and analyze specifications, schedules, logs, test results, and laboratory recommendations to determine how to set equipment controls to produce the required qualities and quantities of products. | —0 | —0 |
Synchronize activities with other pumphouses to ensure a continuous flow of products and a minimum of contamination between products. | —0 | —0 |
Patrol units to monitor the amount of oil in storage tanks, and to verify that activities and operations are safe, efficient, and in compliance with regulations. | —0 | —0 |
Maintain and repair equipment, or report malfunctioning equipment to supervisors so that repairs can be scheduled. | —0 | —0 |
Collect product samples by turning bleeder valves, or by lowering containers into tanks to obtain oil samples. | —0 | —0 |
Inspect pipelines, tightening connections and lubricating valves as necessary. | —0 | —0 |
Conduct general housekeeping of units, including wiping up oil spills and performing general cleaning duties. | —0 | —0 |
Coordinate shutdowns and major projects. | —0 | —0 |
Perform tests to check the qualities and grades of products, such as assessing levels of bottom sediment, water, and foreign materials in oil samples, using centrifugal testers. | —0 | —0 |
Prepare calculations for receipts and deliveries of oil and oil products. | —0 | —0 |
Lower thermometers into tanks to obtain temperature readings. | —0 | —0 |
Clean interiors of processing units by circulating chemicals and solvents within units. | —0 | —0 |
Clamp seals around valves to secure tanks. | —0 | —0 |
이 탭의 값은 관측이 아니라 예측 라벨입니다. Eloundou et al.(2023)은 인간 평가자와 GPT-4 두 평가 기준을 공개했고, 이 표의 β는 그중 GPT-4 평가 기준 하나로만 유도한 값입니다 — 평가 기준이 다르면 같은 작업이라도 값이 달라질 수 있습니다. 다른 탭의 관측 비중(%)과는 단위도 의미도 다르니 같은 축에 놓고 비교하지 마세요.
| 작업 (O*NET 27.2) | βE1 + 0.5 × E2 |
|---|---|
Prepare calculations for receipts and deliveries of oil and oil products.O*NET 작업 ID 14324 | 1.0 |
표준 공식을 사용해 테스트 결과 값을 계산한다.Calculate test result values, using standard formulas. O*NET 작업 ID 14328 | 1.0 |
Monitor process indicators, instruments, gauges, and meters to detect and report any possible problems.O*NET 작업 ID 14305 | 0.5 |
Read automatic gauges at specified intervals to determine the flow rate of oil into or from tanks, and the amount of oil in tanks.O*NET 작업 ID 14311 | 0.5 |
Plan movement of products through lines to processing, storage, and shipping units, using knowledge of system interconnections and capacities.O*NET 작업 ID 14313 | 0.5 |
요구되는 품질과 수량의 제품을 생산하도록 장비 제어를 어떻게 설정할지 결정하기 위해 사양·일정·기록지·테스트 결과·실험실 권고를 읽고 분석한다.Read and analyze specifications, schedules, logs, test results, and laboratory recommendations to determine how to set equipment controls to produce the required qualities and quantities of products. O*NET 작업 ID 14314 | 0.5 |
운전 데이터·계기 판독값·문서·실험실 분석 결과를 기록하고 취합한다.Record and compile operating data, instrument readings, documentation, and results of laboratory analyses. O*NET 작업 ID 14315 | 0.5 |
Coordinate shutdowns and major projects.O*NET 작업 ID 14322 | 0.5 |
Perform tests to check the qualities and grades of products, such as assessing levels of bottom sediment, water, and foreign materials in oil samples, using centrifugal testers.O*NET 작업 ID 14323 | 0.5 |
Start pumps and open valves or use automated equipment to regulate the flow of oil in pipelines and into and out of tanks.O*NET 작업 ID 14306 | 0.0 |
Control or operate manifold and pumping systems to circulate liquids through a petroleum refinery.O*NET 작업 ID 14307 | 0.0 |
Operate control panels to coordinate and regulate process variables such as temperature and pressure, and to direct product flow rate, according to process schedules.O*NET 작업 ID 14308 | 0.0 |
Signal other workers by telephone or radio to operate pumps, open and close valves, and check temperatures.O*NET 작업 ID 14309 | 0.0 |
들어오고 나가는 제품이 올바른 계량기를 거치는지, 계량기가 제대로 작동하는지 검증한다.Verify that incoming and outgoing products are moving through the correct meters, and that meters are working properly. O*NET 작업 ID 14310 | 0.0 |
Operate auxiliary equipment and control multiple processing units during distilling or treating operations, moving controls that regulate valves, pumps, compressors, and auxiliary equipment.O*NET 작업 ID 14312 | 0.0 |
Synchronize activities with other pumphouses to ensure a continuous flow of products and a minimum of contamination between products.O*NET 작업 ID 14316 | 0.0 |
Patrol units to monitor the amount of oil in storage tanks, and to verify that activities and operations are safe, efficient, and in compliance with regulations.O*NET 작업 ID 14317 | 0.0 |
Maintain and repair equipment, or report malfunctioning equipment to supervisors so that repairs can be scheduled.O*NET 작업 ID 14318 | 0.0 |
Collect product samples by turning bleeder valves, or by lowering containers into tanks to obtain oil samples.O*NET 작업 ID 14319 | 0.0 |
Inspect pipelines, tightening connections and lubricating valves as necessary.O*NET 작업 ID 14320 | 0.0 |
Conduct general housekeeping of units, including wiping up oil spills and performing general cleaning duties.O*NET 작업 ID 14321 | 0.0 |
Lower thermometers into tanks to obtain temperature readings.O*NET 작업 ID 14325 | 0.0 |
Clean interiors of processing units by circulating chemicals and solvents within units.O*NET 작업 ID 14326 | 0.0 |
Clamp seals around valves to secure tanks.O*NET 작업 ID 14327 | 0.0 |
β = E1 + 0.5 × E2 · E1 = LLM에 직접 접근하는 것만으로 소요시간이 50% 이상 줄어드는 작업, E2 = LLM 위에 별도 소프트웨어를 얹으면 50% 이상 줄어드는 작업. 값은 0 / 0.5 / 1.0 세 단계뿐입니다.
데이터 출처·라이선스 — O*NET®, Anthropic Economic Index, Eloundou et al. (2023): 상세 고지는 크레딧 및 출처 페이지 참조
O*NET 31.0 작업 전체 (24개)
이 직업의 O*NET 31.0 작업 전체(영문 원문, 유형 핵심·보조). 노출값은 이 목록에 싣지 않으며, 위 표에서 각 원천이 사용한 O*NET 판의 문면 옆에 있습니다.
| 작업 (O*NET 31.0) | 유형 |
|---|---|
| Monitor process indicators, instruments, gauges, and meters to detect and report any possible problems. | 핵심 |
| Start pumps and open valves or use automated equipment to regulate the flow of oil in pipelines and into and out of tanks. | 핵심 |
| Control or operate manifold and pumping systems to circulate liquids through a petroleum refinery. | 핵심 |
| Operate control panels to coordinate and regulate process variables such as temperature and pressure, and to direct product flow rate, according to process schedules. | 핵심 |
| Signal other workers by telephone or radio to operate pumps, open and close valves, and check temperatures. | 핵심 |
| Verify that incoming and outgoing products are moving through the correct meters, and that meters are working properly. | 핵심 |
| Read automatic gauges at specified intervals to determine the flow rate of oil into or from tanks, and the amount of oil in tanks. | 핵심 |
| Operate auxiliary equipment and control multiple processing units during distilling or treating operations, moving controls that regulate valves, pumps, compressors, and auxiliary equipment. | 핵심 |
| Plan movement of products through lines to processing, storage, and shipping units, using knowledge of system interconnections and capacities. | 핵심 |
| Record and compile operating data, instrument readings, documentation, and results of laboratory analyses. | 핵심 |
| Synchronize activities with other pumphouses to ensure a continuous flow of products and a minimum of contamination between products. | 핵심 |
| Patrol units to monitor the amount of oil in storage tanks, and to verify that activities and operations are safe, efficient, and in compliance with regulations. | 핵심 |
| Maintain and repair equipment, or report malfunctioning equipment to supervisors so that repairs can be scheduled. | 핵심 |
| Collect product samples by turning bleeder valves, or by lowering containers into tanks to obtain oil samples. | 핵심 |
| Inspect pipelines, tightening connections and lubricating valves as necessary. | 핵심 |
| Conduct general housekeeping of units, including wiping up oil spills and performing general cleaning duties. | 핵심 |
| Read and analyze specifications, schedules, logs, test results, and laboratory recommendations to determine how to set equipment controls to produce the required qualities and quantities of products. | 보조 |
| Coordinate shutdowns and major projects. | 보조 |
| Perform tests to check the qualities and grades of products, such as assessing levels of bottom sediment, water, and foreign materials in oil samples, using centrifugal testers. | 보조 |
| Prepare calculations for receipts and deliveries of oil and oil products. | 보조 |
| Lower thermometers into tanks to obtain temperature readings. | 보조 |
| Clean interiors of processing units by circulating chemicals and solvents within units. | 보조 |
| Clamp seals around valves to secure tanks. | 보조 |
| Calculate test result values, using standard formulas. | 보조 |
0.92/ 3· 로봇 노출 지수
척도 · 모수 · 출처
물리 작업마다 실제 배치·판매·시연된 로봇이 해낼 수 있는 환경으로 매긴 0–3 등급(0 불가 · 1 펜스 셀·병입 라인 같은 로봇 전용 설비 · 2 병원 약제실·컨테이너 항만 같은 관리된 시설 · 3 가정·건설 현장 같은 비정형 환경)을 근무시간 비중으로 평균한 값
이 직업의 O*NET 29.3 작업 중 물리 작업 기준
등급과 시간 비중은 Anthropic이 Claude Opus 5(웹 검색)로 추정했습니다(2026년 기준).
로봇 노출 지수는 이 사이트의 AI 노출도와는 다른 지표라 더하거나 견줄 수 없습니다. 실제 도입이나 비용 경쟁력을 뜻하지 않으며, 0에는 물리 작업이 없는 직업도 포함됩니다.
물리 작업별 등급
로봇 환경 등급 (E0–E3)
E0 로봇 불가자세히
실제 배치·판매·시연된 로봇으로는 로봇 전용 설비에서도 해낼 수 없다고 평가됨
E1 로봇 전용 설비자세히
펜스 셀·병입 라인처럼 기계를 중심으로 꾸민 설비에서 해낼 수 있다고 평가됨
E2 관리된 시설자세히
병원 약제실·컨테이너 항만처럼 기관이 관리하는 사람의 작업 시설에서 해낼 수 있다고 평가됨
E3 비정형 환경자세히
가정·건설 현장처럼 기관이 관리하지 않는 환경에서 해낼 수 있다고 평가됨
물리 작업으로 분류된 작업만 싣습니다. 그 밖의 작업은 원천에 등급이 없어 넣지 않았습니다.
| 작업 (O*NET 29.3) | 로봇 환경 등급 |
|---|---|
| Monitor process indicators, instruments, gauges, and meters to detect and report any possible problems. | E2 관리된 시설 |
| Start pumps and open valves or use automated equipment to regulate the flow of oil in pipelines and into and out of tanks. | E2 관리된 시설 |
| Control or operate manifold and pumping systems to circulate liquids through a petroleum refinery. | E1 로봇 전용 설비 |
| 들어오고 나가는 제품이 올바른 계량기를 거치는지, 계량기가 제대로 작동하는지 검증한다. | E1 로봇 전용 설비 |
| Read automatic gauges at specified intervals to determine the flow rate of oil into or from tanks, and the amount of oil in tanks. | E2 관리된 시설 |
| Operate auxiliary equipment and control multiple processing units during distilling or treating operations, moving controls that regulate valves, pumps, compressors, and auxiliary equipment. | E1 로봇 전용 설비 |
| Patrol units to monitor the amount of oil in storage tanks, and to verify that activities and operations are safe, efficient, and in compliance with regulations. | E2 관리된 시설 |
| Maintain and repair equipment, or report malfunctioning equipment to supervisors so that repairs can be scheduled. | E0 로봇 불가 |
| Collect product samples by turning bleeder valves, or by lowering containers into tanks to obtain oil samples. | E1 로봇 전용 설비 |
| Inspect pipelines, tightening connections and lubricating valves as necessary. | E1 로봇 전용 설비 |
| Conduct general housekeeping of units, including wiping up oil spills and performing general cleaning duties. | E1 로봇 전용 설비 |
| Perform tests to check the qualities and grades of products, such as assessing levels of bottom sediment, water, and foreign materials in oil samples, using centrifugal testers. | E1 로봇 전용 설비 |
| Lower thermometers into tanks to obtain temperature readings. | E1 로봇 전용 설비 |
| Clean interiors of processing units by circulating chemicals and solvents within units. | E1 로봇 전용 설비 |
| Clamp seals around valves to secure tanks. | E1 로봇 전용 설비 |
직업 정보
고용 전망 (BLS)
- 고용, 2025
- 33K
- 고용 전망, 2035
- 32K
- 변화율 (2025–35)
- -1.9%
- 연간 임금 중위값, 2025
- $96,710
- 진입 시 일반적 학력
- High school diploma or equivalent
한국 직업분류 연결 (KSCO)
AI Changing Work가 만든 한국 직업분류 직결표 v1.1 현행 판의 연결입니다. 관계 값은 O*NET-SOC 직업 쪽에서 읽습니다.
| KSCO 코드 | KSCO 명칭 | 관계 | 상태 |
|---|---|---|---|
| 83112 | 석유 및 천연가스 정제 장치 조작원 | 범위 같음 | 확정 |
| 83113 | 폐유 및 재생유 처리 장치 조작원 | 겹침(같지 않음) | 확정 |
아래 KNOW 직업은 AI Changing Work가 위 표의 KSCO 세세분류에서 한국고용직업분류를 거쳐 분류 코드로 이은 것입니다. 묶음마다 한 분류 칸에 속한 KNOW 직업을 모두 보여 주며, 여러 KSCO 세세분류가 같은 칸으로 이어지면 한 번만 싣습니다. 한국고용정보원이 정한 대응 관계가 아니며, 이 직업과 같은 일이라는 뜻도 아닙니다.
출처: 한국고용정보원 워크넷 직업정보(KNOW) · 공공누리 제4유형
KSCO 83112·83113 에서 이어짐
석유 및 천연가스 제조 관련 제어 장치 조작원
임금(만원): 하위(25%) 4.0K 평균(50%) 4.7K 상위(25%) 5.85K
일자리 전망: 증가(3%) 현상유지(27%) 감소(70%)
직업만족도: 68.6
수행직무
- -가스생산량, 압력, 온도 등의 작업내용 및 생산계획을 중앙조종실에서 지시받는다.
- -작업에 임하기 전 먼저 전 조의 운전원으로부터 정확한 작업인수인계를 받고 운전일지(log sheet), 작업지시서 등을 검토한 후 각 계기의 현황과 각 공정에 대한 투입량·생산량을 파악한다.
- -조정실 모니터를 관찰하여 장치 운전조건을 분석하고 필요한 계기조작을 한다.
- -설비의 작동상태를 현장에서 확인하고 점검한다.
- -생산설비를 기동하고 정비하기 위하여 작업절차에 따라 작업을 준비한다.
- -중앙조정실에서 제어되지 않는 주요 전원을 조작한다.
- -생산설비의 운전상황 및 작동상태를 감시한다.
- -동력(스팀, 전기 등)의 변동사항과 운전상태를 일정 시간마다 점검·기록하며 고장난 계기의 결함을 시정·조치한다.
- -제품 가공처리장치내의 조건이 생산에 적합하게 유지되도록 온도, 압력, 유출속도, 반응시간 등을 조절한다.
- -실험실과 연락하여 공정시료 실험결과를 기록하고 불량시 필요한 조치를 취한다.
- -주요 작업 내용과 특이사항을 작업일지에 기록한다.
- -중앙조정실에 주요사항을 보고한다.
- -각 생산공정과 긴밀한 업무협조 및 연락을 취하여 원활한 생산이 이루어지도록 조정한다.
- -현장의 작업내용, 운전변화사항, 주요지시사항등을 다음 근무자에게 인계한다.
화학물 가공 장치 조작원
임금(만원): 하위(25%) 3.7K 평균(50%) 4.25K 상위(25%) 5.65K
일자리 전망: 증가(0%) 현상유지(50%) 감소(50%)
직업만족도: 63
수행직무
- -고형 화학물 및 기타 재료를 파쇄하고 혼합하는 기계를 조작한다.
- -재료를 정화·혼합 또는 합성하고 특수한 성질로 만들거나 화학변화를 일으키는 기계장비를 조작한다.
- -화학물 및 관련 재료의 가공을 위해 건조기를 조작한다.
- -용액을 여과하는 장치 및 분리시키는 기계를 조작한다.
- -천연 액체성 화학물을 화학적·성분별로 분리 또는 정제하는 증류기를 조작한다.
- -화학약품 및 기타 첨가제를 석유와 혼합하는 기계를 조작한다.
- -생산기록을 작성하고 보관한다.
- -장치설비의 이상유무 확인, 간단한 문제 발생시 필요한 조치 활동을 한다.
- -생산제품의 1차 품질검사 업무를 수행한다.
한국고용정보원 직업정보(KNOW)에서 상세 확인 (외부 사이트)
관계·상태 정의(kr-direct v1.1)
ILO(국제노동기구) 직업설명
아래 ISCO-08 직업군은 AI Changing Work가 미국 노동통계국(BLS)이 발행한 교차표(2018 SOC→2010 SOC, 2010 SOC→ISCO-08)를 사례별 선택 없이 그대로 적용해 이 직업에 연결한 것입니다. 연결은 전부 또는 일부 대응일 수 있습니다.
- ISCO-08 3134Petroleum and Natural Gas Refining Plant Operators
석유 및 천연가스 정제 설비 운영자
출처: 본 저작물은 '국가데이터처'에서 2026년 작성하여 공공누리 제3유형(출처표시-변경금지)으로 개방한 '한국표준직업분류(KSCO 8차)-국제표준직업분류(ISCO-08) 연계표'를 이용하였으며, 해당 저작물은 '국가데이터처 통계분류포털, https://kssc.mods.go.kr'에서 무료로 다운받으실 수 있습니다. 원문을 변경하지 않고 그대로 인용하였습니다.
출처: ILO ISCO-08 · KSCO 명칭: 국가데이터처 연계표 — 상세: 크레딧 및 출처
ESCO 직업 어휘
아래 각 항목은 공개된 ESCO-O*NET 크로스워크(버전 1, 2022)에서 이 직업과 하나씩 대응된 것입니다. 대응 유형은 그 크로스워크의 것이고, 표현은 AI Changing Work의 것입니다.
- gaugerESCO 8131.8이 직업이 더 넓음
Gaugers test oil during the processing and before dispatch. They control pumping systems and regulate the flow of oil into the pipelines.
- oil refinery control room operatorESCO 3134.3이 직업이 더 넓음
Oil refinery control room operators perform a range of tasks from the control room of an oil refinery. They monitor the processes through electronic representations shown on monitors, dials, and lights. Control room operators make changes to variables and communicate with other departments to make sure processes keep running smoothly and according to established procedures. They take appropriate actions in case of irregularities or emergencies.
- petroleum pump system operatorESCO 3134.4이 직업이 더 넓음
Petroleum pump system operators tend pumps that keep the circulation of oil and derived products running smoothly. They monitor the flow within the pipes at a refinery and test the equipment to ensure minimum disruptions. Pump systems operators work from a highly automated control room, where they communicate with other workers to coordinate pump activities. Pump system operators undertake minor repairs and maintenance, and report as called for.
출처: European Commission, DG EMPL — ESCO API 2026-08-08 (bridge v1.2.1)
라이선스: CC BY 4.0 (EU Reuse Notice)
ESCO 재이용 조건과 수정 고지는 크레딧 및 출처에 있습니다.
프랑스 직업분류 연결 (ROME)
이 직업과 ROME 4.0 직업(fiche)을 AI Changing Work가 AI 모델로 판정해 이은 연결입니다. 관계 값은 이 직업 쪽에서 읽습니다. 「잠정」 표시 연결은 같은 모델 계열(Claude)의 두 판단자 판정만으로, 또는 그 판정에 운영자 규칙을 적용해 채택한 연결이라 확정 연결보다 근거가 약합니다.
| ROME 코드 | ROME 명칭 (프랑스어) | 관계 |
|---|---|---|
| H2711 | Opérateur / Opératrice consoliste en raffinerie | 범위 같음잠정 |
| F1211 | Responsable d'exploitation de gisements pétrole et gaz | 관련(대응 아님)잠정 |
| K1723 | Opérateur / Opératrice d'exploitation et de maintenance pétrolières de l'Armée | 관련(대응 아님)잠정 |
Source: France Travail — Répertoire Opérationnel des Métiers et des Emplois (ROME 4.0), version 61, last updated 15 June 2026 (https://www.data.gouv.fr/datasets/repertoire-operationnel-des-metiers-et-des-emplois-rome). Licence Ouverte 2.0.
ROME codes and titles are reproduced unchanged; the links to O*NET-SOC occupations are AI Changing Work's own judgment and are not a France Travail correspondence.
(AI Changing Work link release: fr-direct v1)
스페인 직업분류 연결 (CNO-11)
이 직업과 CNO-11 직업을 AI Changing Work가 AI 모델로 판정해 이은 연결입니다. 관계 값은 이 직업 쪽에서 읽습니다.
| CNO-11 코드 | CNO-11 명칭 (스페인어) | 관계 |
|---|---|---|
| 3134 | Técnicos de refinerías de petróleo y gas natural | 범위 같음 |
출처: 스페인 국립통계청(INE), 국가직업분류 2011(CNO-11, 왕령 1591/2010) — www.ine.es · CC BY 4.0. CNO-11 코드와 스페인어 직업명은 변경 없이 표시하며, O*NET 직업과의 연결은 AI Changing Work 자체 판단으로 INE의 대응표가 아닙니다.
(AI Changing Work link release: es-direct v1)
독일 직업분류 연결 (KldB)
이 직업과 KldB 직업을 AI Changing Work가 AI 모델로 판정해 이은 연결입니다. 관계 값은 이 직업 쪽에서 읽습니다.
| KldB 코드 | KldB 명칭 (독일어) | 관계 |
|---|---|---|
| 41312 | Berufe in der Chemie- und Pharmatechnik - fachlich ausgerichtete Tätigkeiten | 이 직업이 더 좁음잠정 |
| 41343 | Steuerer/Steuerinnen von Erdöl- und Erdgasraffinationsanlagen - komplexe Spezialistentätigkeiten | 이 직업이 더 넓음 |
출처: © Statistik der Bundesagentur für Arbeit — Klassifikation der Berufe 2010 – überarbeitete Fassung 2020, https://statistik.arbeitsagentur.de. KldB 코드와 직업명은 변경 없이 표시하며, O*NET 직업과의 연결은 AI Changing Work 자체 매핑(eigene Zuordnung)으로 연방고용청의 대응표가 아닙니다.
(AI Changing Work link release: de-direct v1)
일본 직업분류 연결 (JSCO)
이 직업과 JSCO 직업을 AI Changing Work가 AI 모델로 판정해 이은 연결입니다. 관계 값은 이 직업 쪽에서 읽습니다.
| JSCO 코드 | JSCO 명칭 (일본어) | 관계 |
|---|---|---|
| 501 | 化学製品生産設備制御・監視員 | 이 직업이 더 좁음 |
| 531 | 化学製品製造従事者 | 관련(대응 아님) |
| 644 | ポンプ・ブロワー・コンプレッサー運転従事者 | 관련(대응 아님) |
출처: 일본 총무성, 일본표준직업분류(2009년 12월, 총무성 고시 제555호). JSCO 코드와 일본어 직업명은 변경 없이 표시하며, O*NET 직업과의 연결은 AI Changing Work 자체 판단으로 총무성의 대응표가 아닙니다.
(AI Changing Work link release: jp-direct v1)
이 페이지의 데이터 출처·라이선스와 AI Changing Work의 수정·번역 고지: 크레딧 및 출처