전력선 설치 및 수리공

건설, 유지보수 및 수리

AI 노출도

  • 데이터 출처: BLS발행 시점: 2026-08

    낮음· 상대

    낮음4단계 상대 범주매우 높음

    직업군 단위 값

    척도 · 모수 · 출처

    4단계 상대 범주 (낮음 / 보통 / 높음 / 매우 높음)

    BLS 고용전망 표의 세부직업 831개 기준. 값은 NEM(전국고용매트릭스) 코드 단위로 부여되므로, 같은 NEM 코드를 쓰는 직업은 같은 밴드를 받습니다

    원천 데이터셋 (XLSX 파일 내려받기)

  • 데이터 출처: Anthropic발행 시점: 2026-03

    0.000

    0.000여기 실린 값의 범위0.745
    척도 · 모수 · 출처

    관측 노출 지수, 발행된 그대로 0–1

    O*NET 과업 매핑 기준

    원천 데이터셋

  • 데이터 출처: ILO발행 시점: 2025

    0.15

    0.09여기 실린 값의 범위0.70

    직업군 단위 값

    척도 · 모수 · 출처

    생성형 AI 노출 지수, 발행된 그대로 0–1

    ISCO-08 직업군 단위 — 같은 코드를 쓰는 직업은 모두 같은 값

    본 사이트 산출이며 ILO가 발행한 수치가 아닙니다. 본 사이트가 ILO 데이터셋에 연결한 직업 1,012개 가운데 이 값 이상인 직업이 92%입니다.

    원천 데이터셋

이 원천이 어떤 종류의 값인가

BLS 범주는 절대 수준이 아니라 상대 순위이며, 1차 측정도 아닙니다. 여러 선행 연구가 매긴 직업별 백분위 순위를 4단계로 묶은 값입니다. 고용·임금 예측도, 도입 확률도 아니며 자동화와 증강을 구분하지 않습니다.

작업별 노출도

노출된 작업만
작업Claude.ai원천값 / 비중 %API원천값 / 비중 %
작업 배정의 준비와 완료를 다른 작업자와 조율한다.

Coordinate work assignment preparation and completion with other workers.

49-9051

0.00000.00.0100100.0
모든 표면에서 관측 없음 22건 — 원천에 해당 릴리스 행이 없는 태스크입니다. 비중 0은 표시 단계의 구성비이고, 부재는 원천값 칸의 —가 나타냅니다.
장비를 정기적으로 확인하고 작업 구역 둘레에 차단벽을 세우는 것 같은 안전 관행과 절차를 지킨다.

Adhere to safety practices and procedures, such as checking equipment regularly and erecting barriers around work areas.

—0—0
손상되거나 끊어진 전선의 전기 위험을 없애거나 수리를 쉽게 하기 위해 개폐기를 열거나 접지 장치를 붙인다.

Open switches or attach grounding devices to remove electrical hazards from disturbed or fallen lines or to facilitate repairs.

—0—0
장비에 접근하려고 전주를 오르거나 트럭 탑재형 버킷을 쓴다.

Climb poles or use truck-mounted buckets to access equipment.

—0—0
도체와 접합부 위에 절연 자재나 내화 자재를 덮는다.

Place insulating or fireproofing materials over conductors and joints.

—0—0
전선관·케이블·전선과 변압기·차단기·개폐기 같은 관련 장비를 포함해 배전 설비와 송전 설비를 설치·유지보수하고 수리한다.

Install, maintain, and repair electrical distribution and transmission systems, including conduits, cables, wires, and related equipment, such as transformers, circuit breakers, and switches.

—0—0
배선도와 전기 시험 계측기를 사용해 결함이 있는 구분 개폐 장치·차단기·퓨즈·전압 조정기·변압기·스위치·계전기·배선을 파악한다.

Identify defective sectionalizing devices, circuit breakers, fuses, voltage regulators, transformers, switches, relays, or wiring, using wiring diagrams and electrical-testing instruments.

—0—0
공구와 자재를 실은 차량을 작업 현장까지 운전한다.

Drive vehicles equipped with tools and materials to job sites.

—0—0
판독 계기와 시험 계기를 사용해 문제의 위치를 찾고 문제를 파악하려고 송전선과 보조 장비를 점검하고 테스트한다.

Inspect and test power lines and auxiliary equipment to locate and identify problems, using reading and testing instruments.

—0—0
전주·철탑·굴착 도랑·파일런·건물 사이에 전선과 케이블을 가설하며, 선을 제자리에 놓고 윈치로 장력을 조정한다.

String wire conductors and cables between poles, towers, trenches, pylons, and buildings, setting lines in place and using winches to adjust tension.

—0—0
대응하는 도체를 파악하고 잘못된 결선을 막기 위해 전기 도면과 사양에 따라 도체를 검사한다.

Test conductors, according to electrical diagrams and specifications, to identify corresponding conductors and to prevent incorrect connections.

—0—0
손상된 전주를 교체하거나 바로 세운다.

Replace or straighten damaged poles.

—0—0
전력량계를 설치하고 배전선과 수용가 설비 사이의 인입선을 연결한다.

Install watt-hour meters and connect service drops between power lines and consumers' facilities.

—0—0
전주를 세우기 전에 완목·애자·보조 장비를 전주에 붙인다.

Attach cross-arms, insulators, and auxiliary equipment to poles prior to installing them.

—0—0
트럭·헬리콥터·비행기를 타고 이동하며 선로에 장애물이 없는지와 절연이 충분한지 점검한다.

Travel in trucks, helicopters, and airplanes to inspect lines for freedom from obstruction and adequacy of insulation.

—0—0
오거를 사용해 구덩이를 파고, 크레인과 동력 장비를 사용해 기둥을 세운다.

Dig holes, using augers, and set poles, using cranes and power equipment.

—0—0
케이블이나 전선의 기능에 위험이 될 수 있는 나무를 가지치기한다.

Trim trees that could be hazardous to the functioning of cables or wires.

—0—0
수공구·에폭시·전용 장비로 케이블끼리 또는 케이블을 가공 송전선·수용가 인입선·가로등 선에 접속하거나 납땜한다.

Splice or solder cables together or to overhead transmission lines, customer service lines, or street light lines, using hand tools, epoxies, or specialized equipment.

—0—0
접속 작업에 앞서 결함이 있거나 새로 설치한 케이블과 전선관에서 납 피복과 절연재를 잘라 벗겨 낸다.

Cut and peel lead sheathing and insulation from defective or newly installed cables and conduits prior to splicing.

—0—0
트럭에 실린 대형 릴에서 케이블을 손으로 끌어 올린다.

Pull up cable by hand from large reels mounted on trucks.

—0—0
지하 케이블을 도랑에 직접 매설하거나, 도랑을 지나는 관로에 꿰어 넣는다.

Lay underground cable directly in trenches, or string it through conduit running through the trenches.

—0—0
트렌처와 케이블 플라우를 사용해 지중 케이블을 매설할 도랑을 판다.

Cut trenches for laying underground cables, using trenchers and cable plows.

—0—0
끝을 서로 꼬거나 금속 클램프로 이어 붙이고 납땜해 대응하는 도체를 세척·주석 도금하고 접속한다.

Clean, tin, and splice corresponding conductors by twisting ends together or by joining ends with metal clamps and soldering connections.

—0—0

데이터 출처·라이선스 — O*NET®, Anthropic Economic Index, Eloundou et al. (2023): 상세 고지는 크레딧 및 출처 페이지 참조

직업 정보