석유·가스 서비스 유닛 조작원
건설·채굴직Service Unit Operators, Oil and Gas
- O*NET-SOC 코드
- 47-5013.00
Operate equipment to increase oil flow from producing wells or to remove stuck pipe, casing, tools, or other obstructions from drilling wells. Includes fishing-tool technicians.
- 데이터 출처: BLS발행 시점: 2026-08
낮음· 상대
낮음4단계 상대 범주매우 높음직업군 단위 값
척도 · 모수 · 출처
4단계 상대 범주 (낮음 / 보통 / 높음 / 매우 높음)
BLS 고용전망 표의 세부직업 831개 기준. 값은 NEM(전국고용매트릭스) 코드 단위로 부여되므로, 같은 NEM 코드를 쓰는 직업은 같은 밴드를 받습니다
- 데이터 출처: Anthropic발행 시점: 2026-03
0.000
0.000여기 실린 값의 범위0.745척도 · 모수 · 출처
관측 노출 지수, 발행된 그대로 0–1
O*NET 작업 매핑 기준
SOC 2018 직업 단위로 발행된 값이며, 같은 SOC 2018 코드를 가진 O*NET 직업은 모두 이 값을 받습니다
- 데이터 출처: ILO발행 시점: 2025
0.19
0.09여기 실린 값의 범위0.70직업군 단위 값
척도 · 모수 · 출처
생성형 AI 노출 지수, 발행된 그대로 0–1
ISCO-08 직업군 단위로 발행된 값입니다. 미국 노동통계국(BLS)의 공식 교차표(ISCO-08→2010 SOC, 2010 SOC→2018 SOC)를 그대로 적용해 이 직업에 연결했으며, 연결은 전부 또는 일부 대응입니다
이 원천이 어떤 종류의 값인가
BLS 범주는 절대 수준이 아니라 상대 순위이며, 1차 측정도 아닙니다. 여러 선행 연구가 매긴 직업별 백분위 순위를 4단계로 묶은 값입니다. 고용·임금 예측도, 도입 확률도 아니며 자동화와 증강을 구분하지 않습니다.
작업별 노출도
숨긴 작업 18개 보기평가 작업 19개 · β ≥ 0.5 인 작업 1개 (5.3%)
β = 직접 노출(E1) + 0.5 × 도구 활용 시 노출(E2). 원본 저장소의 정의를 따릅니다.
- 원천 단위: O*NET 27.2 작업 → O*NET 31.0 직업 코드
- 채점된 작업이 모두 O*NET 31.0 작업 목록에 있습니다.
- 출처
- OpenAI "GPTs are GPTs" exposure rubric
- 판
- gh-main-0471612
- 라이선스
- MIT License, Copyright (c) 2024 OpenAI
이 탭의 값은 관측이 아니라 예측 라벨입니다. Eloundou et al.(2023)은 인간 평가자와 GPT-4 두 평가 기준을 공개했고, 이 표의 β는 그중 GPT-4 평가 기준 하나로만 유도한 값입니다 — 평가 기준이 다르면 같은 작업이라도 값이 달라질 수 있습니다. 다른 탭의 관측 비중(%)과는 단위도 의미도 다르니 같은 축에 놓고 비교하지 마세요.
| 작업 (O*NET 27.2) | βE1 + 0.5 × E2 |
|---|---|
청구를 위해 제공한 서비스·사용한 도구·소요 시간의 보고서를 작성한다.Prepare reports of services rendered, tools used, or time required, for billing purposes. O*NET 작업 ID 7083 | 1.0 |
β = E1 + 0.5 × E2 · E1 = LLM에 직접 접근하는 것만으로 소요시간이 50% 이상 줄어드는 작업, E2 = LLM 위에 별도 소프트웨어를 얹으면 50% 이상 줄어드는 작업. 값은 0 / 0.5 / 1.0 세 단계뿐입니다.
데이터 출처·라이선스 — O*NET®, Eloundou et al. (2023): 상세 고지는 크레딧 및 출처 페이지 참조
O*NET 31.0 작업 전체 (19개)
이 직업의 O*NET 31.0 작업 전체(영문 원문, 유형 핵심·보조). 노출값은 이 목록에 싣지 않으며, 위 표에서 각 원천이 사용한 O*NET 판의 문면 옆에 있습니다.
| 작업 (O*NET 31.0) | 유형 |
|---|---|
| Confer with others to gather information regarding pipe or tool sizes or borehole conditions in wells. | 핵심 |
| Drive truck-mounted units to well sites. | 핵심 |
| Install pressure-control devices onto wellheads. | 핵심 |
| Thread cables through derrick pulleys, using hand tools. | 핵심 |
| Operate pumps that circulate water, oil, or other fluids through wells to remove sand or other materials obstructing the free flow of oil. | 핵심 |
| Close and seal wells no longer in use. | 핵심 |
| Operate controls that raise derricks or level rigs. | 핵심 |
| Prepare reports of services rendered, tools used, or time required, for billing purposes. | 핵심 |
| Select fishing methods or tools for removing obstacles such as liners, broken casing, screens, or drill pipe. | 핵심 |
| Interpret instrument readings to ascertain the depth of obstruction. | 핵심 |
| Maintain and perform safety inspections on equipment and tools. | 핵심 |
| Listen to engines, rotary chains, or other equipment to detect faulty operations or unusual well conditions. | 핵심 |
| Direct drilling crews performing activities such as assembling and connecting pipe, applying weights to drill pipes, or drilling around lodged obstacles. | 보조 |
| Perforate well casings or sidewalls of boreholes with explosive charges. | 보조 |
| Operate specialized equipment to remove obstructions by backing off or severing pipes by chemical or explosive action. | 보조 |
| Examine unserviceable wells to determine actions to be taken to improve well conditions. | 보조 |
| Insert detection instruments into wells with obstructions. | 보조 |
| Monitor sound wave-generating or detecting mechanisms to determine well fluid levels. | 보조 |
| Apply green technologies or techniques, such as the use of coiled tubing, slim-hole drilling, horizontal drilling, hydraulic fracturing, or gas lift systems. | 보조 |
0.75/ 3· 로봇 노출 지수
척도 · 모수 · 출처
물리 작업마다 실제 배치·판매·시연된 로봇이 해낼 수 있는 환경으로 매긴 0–3 등급(0 불가 · 1 펜스 셀·병입 라인 같은 로봇 전용 설비 · 2 병원 약제실·컨테이너 항만 같은 관리된 시설 · 3 가정·건설 현장 같은 비정형 환경)을 근무시간 비중으로 평균한 값
이 직업의 O*NET 29.3 작업 중 물리 작업 기준
등급과 시간 비중은 Anthropic이 Claude Opus 5(웹 검색)로 추정했습니다(2026년 기준).
로봇 노출 지수는 이 사이트의 AI 노출도와는 다른 지표라 더하거나 견줄 수 없습니다. 실제 도입이나 비용 경쟁력을 뜻하지 않으며, 0에는 물리 작업이 없는 직업도 포함됩니다.
물리 작업별 등급
로봇 환경 등급 (E0–E3)
E0 로봇 불가자세히
실제 배치·판매·시연된 로봇으로는 로봇 전용 설비에서도 해낼 수 없다고 평가됨
E1 로봇 전용 설비자세히
펜스 셀·병입 라인처럼 기계를 중심으로 꾸민 설비에서 해낼 수 있다고 평가됨
E2 관리된 시설자세히
병원 약제실·컨테이너 항만처럼 기관이 관리하는 사람의 작업 시설에서 해낼 수 있다고 평가됨
E3 비정형 환경자세히
가정·건설 현장처럼 기관이 관리하지 않는 환경에서 해낼 수 있다고 평가됨
물리 작업으로 분류된 작업만 싣습니다. 그 밖의 작업은 원천에 등급이 없어 넣지 않았습니다.
| 작업 (O*NET 29.3) | 로봇 환경 등급 |
|---|---|
| Drive truck-mounted units to well sites. | E2 관리된 시설 |
| Install pressure-control devices onto wellheads. | E0 로봇 불가 |
| Thread cables through derrick pulleys, using hand tools. | E0 로봇 불가 |
| Operate pumps that circulate water, oil, or other fluids through wells to remove sand or other materials obstructing the free flow of oil. | E2 관리된 시설 |
| Close and seal wells no longer in use. | E0 로봇 불가 |
| Operate controls that raise derricks or level rigs. | E2 관리된 시설 |
| Maintain and perform safety inspections on equipment and tools. | E0 로봇 불가 |
| Listen to engines, rotary chains, or other equipment to detect faulty operations or unusual well conditions. | E2 관리된 시설 |
| Perforate well casings or sidewalls of boreholes with explosive charges. | E0 로봇 불가 |
| Operate specialized equipment to remove obstructions by backing off or severing pipes by chemical or explosive action. | E1 로봇 전용 설비 |
| Examine unserviceable wells to determine actions to be taken to improve well conditions. | E0 로봇 불가 |
| Insert detection instruments into wells with obstructions. | E1 로봇 전용 설비 |
| Monitor sound wave-generating or detecting mechanisms to determine well fluid levels. | E1 로봇 전용 설비 |
| Apply green technologies or techniques, such as the use of coiled tubing, slim-hole drilling, horizontal drilling, hydraulic fracturing, or gas lift systems. | E0 로봇 불가 |
직업 정보
고용 전망 (BLS)
- 고용, 2025
- 44K
- 고용 전망, 2035
- 44K
- 변화율 (2025–35)
- +1.1%
- 연간 임금 중위값, 2025
- $58,160
- 진입 시 일반적 학력
- No formal educational credential
한국 직업분류 연결 (KSCO)
AI Changing Work가 만든 한국 직업분류 직결표 v1.1 현행 판의 연결입니다. 관계 값은 O*NET-SOC 직업 쪽에서 읽습니다.
| KSCO 코드 | KSCO 명칭 | 관계 | 상태 |
|---|---|---|---|
| 87402 | 시추 장비 조작원 | 이 직업이 더 좁음 | 확정 |
아래 KNOW 직업은 AI Changing Work가 위 표의 KSCO 세세분류에서 한국고용직업분류를 거쳐 분류 코드로 이은 것입니다. 묶음마다 한 분류 칸에 속한 KNOW 직업을 모두 보여 주며, 여러 KSCO 세세분류가 같은 칸으로 이어지면 한 번만 싣습니다. 한국고용정보원이 정한 대응 관계가 아니며, 이 직업과 같은 일이라는 뜻도 아닙니다.
출처: 한국고용정보원 워크넷 직업정보(KNOW) · 공공누리 제4유형
KSCO 87402 에서 이어짐
건설 및 채굴 기계 운전원
임금(만원): 하위(25%) 3.9K 평균(50%) 4.8K 상위(25%) 5.625K
일자리 전망: 증가(10%) 현상유지(13%) 감소(77%)
직업만족도: 66.2
수행직무
- -작업지시서 또는 작업현장을 파악하고 작업에 필요한 부품, 작업시간, 작업절차 등을 결정한다.
- -작업에 필요한 부속품을 설치, 조정하고, 연료를 채우며 기계를 점검한다.
- -예정된 절차와 순서에 따라 중기를 운전, 조작하여 작업을 수행한다.
- -공사책임자, 다른 중기운전원 또는 작업인부와 필요한 의사교환을 한다.
- -작업의 정확도를 확인하고 필요한 수정을 한다.
- -중기를 소제하고, 닦고, 기름치며 간단한 정비를 한다.
한국고용정보원 직업정보(KNOW)에서 상세 확인 (외부 사이트)
관계·상태 정의(kr-direct v1.1)
ILO(국제노동기구) 직업설명
아래 ISCO-08 직업군은 AI Changing Work가 미국 노동통계국(BLS)이 발행한 교차표(2018 SOC→2010 SOC, 2010 SOC→ISCO-08)를 사례별 선택 없이 그대로 적용해 이 직업에 연결한 것입니다. 연결은 전부 또는 일부 대응일 수 있습니다.
- ISCO-08 8113Well Drillers and Borers and Related Workers
시추원, 굴착원 및 관련 종사자
출처: 본 저작물은 '국가데이터처'에서 2026년 작성하여 공공누리 제3유형(출처표시-변경금지)으로 개방한 '한국표준직업분류(KSCO 8차)-국제표준직업분류(ISCO-08) 연계표'를 이용하였으며, 해당 저작물은 '국가데이터처 통계분류포털, https://kssc.mods.go.kr'에서 무료로 다운받으실 수 있습니다. 원문을 변경하지 않고 그대로 인용하였습니다.
아래 정의·작업·예시 직업은 이 직업이 아니라 해당 ISCO-08 직업군에 대한 ILO의 설명입니다.
Well drillers and borers and related workers position, assemble and operate drilling machinery and related equipment to sink wells, extract rock samples, liquids and gases or for a variety of other purposes.
작업
- (a) dismantling, moving and assembling drilling rigs and auxiliary equipment;
- (b) assembling and dismantling pipes, casings and drill heads, and replacing dysfunctional equipment;
- (c) operating controls to lower and raise drill pipes and casings in and out of wells, regulate pressure in the well and control the speed of tools;
- (d) preparing drilling fluid and checking the operation of pumps to ensure adequate circulation of fluid in drill pipe and well;
- (e) monitoring gauges and other indicators and listening to equipment to detect malfunctions and unusual well conditions, and determining the need to change drilling or equipment;
- (f) maintaining, adjusting, repairing and cleaning drilling rigs, hoisting and other machinery;
- (g) maintaining records of drilling and servicing operations;
- (h) operating machines and tools to extract dust, cuttings and lost and broken drilling equipment from holes and wells;
- (i) closing and sealing wells no longer in use;
- (j) supervising and training crew members.
예시 직업
Bore sinker · Boring equipment operator · Derrickman · Derrick operator · Developmental driller · Directional driller · Driller (oil or gas well) · Drilling plant operator · Drilling rig operator · Power-tong operator · Toolpusher · Tourpusher
출처: ILO ISCO-08 · KSCO 명칭: 국가데이터처 연계표 — 상세: 크레딧 및 출처
ESCO 직업 어휘
아래 각 항목은 공개된 ESCO-O*NET 크로스워크(버전 1, 2022)에서 이 직업과 하나씩 대응된 것입니다. 대응 유형은 그 크로스워크의 것이고, 표현은 AI Changing Work의 것입니다.
- gaugerESCO 8131.8겹침(같지 않음)
Gaugers test oil during the processing and before dispatch. They control pumping systems and regulate the flow of oil into the pipelines.
- oil rig motorhandESCO 8113.3겹침(같지 않음)
Oil rig motorhands assume responsibility for the engines powering the drilling equipment. They ensure that all other rig equipment operates correctly.
출처: European Commission, DG EMPL — ESCO API 2026-08-08 (bridge v1.2.1)
라이선스: CC BY 4.0 (EU Reuse Notice)
ESCO 재이용 조건과 수정 고지는 크레딧 및 출처에 있습니다.
프랑스 직업분류 연결 (ROME)
이 직업과 ROME 4.0 직업(fiche)을 AI Changing Work가 AI 모델로 판정해 이은 연결입니다. 관계 값은 이 직업 쪽에서 읽습니다. 「잠정」 표시 연결은 같은 모델 계열(Claude)의 두 판단자 판정만으로, 또는 그 판정에 운영자 규칙을 적용해 채택한 연결이라 확정 연결보다 근거가 약합니다.
| ROME 코드 | ROME 명칭 (프랑스어) | 관계 |
|---|---|---|
| F1403 | Foreur / Foreuse pétrole et gaz | 관련(대응 아님)잠정 |
| F1404 | Technicien / Technicienne de forage pétrole et gaz | 관련(대응 아님)잠정 |
Source: France Travail — Répertoire Opérationnel des Métiers et des Emplois (ROME 4.0), version 61, last updated 15 June 2026 (https://www.data.gouv.fr/datasets/repertoire-operationnel-des-metiers-et-des-emplois-rome). Licence Ouverte 2.0.
ROME codes and titles are reproduced unchanged; the links to O*NET-SOC occupations are AI Changing Work's own judgment and are not a France Travail correspondence.
(AI Changing Work link release: fr-direct v1)
스페인 직업분류 연결 (CNO-11)
이 직업과 CNO-11 직업을 AI Changing Work가 AI 모델로 판정해 이은 연결입니다. 관계 값은 이 직업 쪽에서 읽습니다.
| CNO-11 코드 | CNO-11 명칭 (스페인어) | 관계 |
|---|---|---|
| 8113 | Sondistas y trabajadores afines | 이 직업이 더 좁음 |
출처: 스페인 국립통계청(INE), 국가직업분류 2011(CNO-11, 왕령 1591/2010) — www.ine.es · CC BY 4.0. CNO-11 코드와 스페인어 직업명은 변경 없이 표시하며, O*NET 직업과의 연결은 AI Changing Work 자체 판단으로 INE의 대응표가 아닙니다.
(AI Changing Work link release: es-direct v1)
독일 직업분류 연결 (KldB)
이 직업과 KldB 직업을 AI Changing Work가 AI 모델로 판정해 이은 연결입니다. 관계 값은 이 직업 쪽에서 읽습니다.
| KldB 코드 | KldB 명칭 (독일어) | 관계 |
|---|---|---|
| 21112 | Berufe im Berg- und Tagebau - fachlich ausgerichtete Tätigkeiten | 이 직업이 더 좁음 |
출처: © Statistik der Bundesagentur für Arbeit — Klassifikation der Berufe 2010 – überarbeitete Fassung 2020, https://statistik.arbeitsagentur.de. KldB 코드와 직업명은 변경 없이 표시하며, O*NET 직업과의 연결은 AI Changing Work 자체 매핑(eigene Zuordnung)으로 연방고용청의 대응표가 아닙니다.
(AI Changing Work link release: de-direct v1)
일본 직업분류 연결 (JSCO)
이 직업과 JSCO 직업을 AI Changing Work가 AI 모델로 판정해 이은 연결입니다. 관계 값은 이 직업 쪽에서 읽습니다.
| JSCO 코드 | JSCO 명칭 (일본어) | 관계 |
|---|---|---|
| 646 | 採油・天然ガス採取機械運転従事者 | 이 직업이 더 좁음 |
| 645 | 建設・さく井機械運転従事者 | 관련(대응 아님) |
출처: 일본 총무성, 일본표준직업분류(2009년 12월, 총무성 고시 제555호). JSCO 코드와 일본어 직업명은 변경 없이 표시하며, O*NET 직업과의 연결은 AI Changing Work 자체 판단으로 총무성의 대응표가 아닙니다.
(AI Changing Work link release: jp-direct v1)
이 페이지의 데이터 출처·라이선스와 AI Changing Work의 수정·번역 고지: 크레딧 및 출처