항공기 정비사 및 서비스 기술자
설치·정비·수리직Aircraft Mechanics and Service Technicians
- O*NET-SOC 코드
- 49-3011.00
Diagnose, adjust, repair, or overhaul aircraft engines and assemblies, such as hydraulic and pneumatic systems.
한국어 직업명은 AI Changing Work의 번역입니다. 과업 문장과 원천 값은 공표된 영문 그대로 표시합니다.
AI 노출도
- 데이터 출처: BLS발행 시점: 2026-08
낮음· 상대
낮음4단계 상대 범주매우 높음직업군 단위 값
척도 · 모수 · 출처
4단계 상대 범주 (낮음 / 보통 / 높음 / 매우 높음)
BLS 고용전망 표의 세부직업 831개 기준. 값은 NEM(전국고용매트릭스) 코드 단위로 부여되므로, 같은 NEM 코드를 쓰는 직업은 같은 밴드를 받습니다
- 데이터 출처: Anthropic발행 시점: 2026-03
0.000
0.000여기 실린 값의 범위0.745척도 · 모수 · 출처
관측 노출 지수, 발행된 그대로 0–1
O*NET 과업 매핑 기준
SOC 2018 직업 단위로 발행된 값이며, 같은 SOC 2018 코드를 가진 O*NET 직업은 모두 이 값을 받습니다
- 데이터 출처: ILO발행 시점: 2025
0.19
0.09여기 실린 값의 범위0.70직업군 단위 값
척도 · 모수 · 출처
생성형 AI 노출 지수, 발행된 그대로 0–1
ISCO-08 직업군 단위로 발행된 값입니다. 미국 노동통계국(BLS)의 공식 교차표(ISCO-08→2010 SOC, 2010 SOC→2018 SOC)를 그대로 적용해 이 직업에 연결했으며, 연결은 전부 또는 일부 대응입니다
이 원천이 어떤 종류의 값인가
BLS 범주는 절대 수준이 아니라 상대 순위이며, 1차 측정도 아닙니다. 여러 선행 연구가 매긴 직업별 백분위 순위를 4단계로 묶은 값입니다. 고용·임금 예측도, 도입 확률도 아니며 자동화와 증강을 구분하지 않습니다.
AI 노출도 (OpenAI 루브릭)
평가 과업 38개 · β ≥ 0.5 인 과업 7개 (18.4%)
β = 직접 노출(E1) + 0.5 × 도구 활용 시 노출(E2). 원본 저장소의 정의를 따릅니다.
- 원천 단위: O*NET 27.2 과업 → O*NET 31.0 직업 코드
- 채점된 과업이 모두 O*NET 31.0 과업 목록에 있습니다.
- 출처
- OpenAI "GPTs are GPTs" exposure rubric
- 판
- gh-main-0471612
- 라이선스
- MIT License, Copyright (c) 2024 OpenAI
과업
O*NET® 31.0 Database의 과업 문장입니다. 핵심(Core) 과업을 먼저 보입니다.
| 과업 | 유형 | β (OpenAI) |
|---|---|---|
| Read and interpret maintenance manuals, service bulletins, and other specifications to determine the feasibility and method of repairing or replacing malfunctioning or damaged components. | 핵심 | 1 |
| Inspect completed work to certify that maintenance meets standards and that aircraft are ready for operation. | 핵심 | 0 |
| Maintain repair logs, documenting all preventive and corrective aircraft maintenance. | 핵심 | 1 |
| Conduct routine and special inspections as required by regulations. | 핵심 | 0 |
| Examine and inspect aircraft components, including landing gear, hydraulic systems, and deicers to locate cracks, breaks, leaks, or other problems. | 핵심 | 0 |
| Inspect airframes for wear or other defects. | 핵심 | 0.5 |
| Maintain, repair, and rebuild aircraft structures, functional components, and parts, such as wings and fuselage, rigging, hydraulic units, oxygen systems, fuel systems, electrical systems, gaskets, or seals. | 핵심 | 0 |
| Measure the tension of control cables. | 핵심 | 0 |
| Replace or repair worn, defective, or damaged components, using hand tools, gauges, and testing equipment. | 핵심 | 0 |
| Measure parts for wear, using precision instruments. | 핵심 | 0 |
| Assemble and install electrical, plumbing, mechanical, hydraulic, and structural components and accessories, using hand or power tools. | 핵심 | 0 |
| Test operation of engines and other systems, using test equipment, such as ignition analyzers, compression checkers, distributor timers, or ammeters. | 핵심 | 0 |
| Obtain fuel and oil samples and check them for contamination. | 핵심 | 0 |
| Reassemble engines following repair or inspection and reinstall engines in aircraft. | 핵심 | 0 |
| Read and interpret pilots' descriptions of problems to diagnose causes. | 핵심 | 1 |
| Modify aircraft structures, space vehicles, systems, or components, following drawings, schematics, charts, engineering orders, and technical publications. | 핵심 | 0 |
| Install and align repaired or replacement parts for subsequent riveting or welding, using clamps and wrenches. | 핵심 | 0 |
| Locate and mark dimensions and reference lines on defective or replacement parts, using templates, scribes, compasses, and steel rules. | 핵심 | 0 |
| Clean, strip, prime, and sand structural surfaces and materials to prepare them for bonding. | 핵심 | 0 |
| Service and maintain aircraft and related apparatus by performing activities such as flushing crankcases, cleaning screens, and or moving parts. | 핵심 | 0 |
| Examine engines through specially designed openings while working from ladders or scaffolds, or use hoists or lifts to remove the entire engine from an aircraft. | 핵심 | 0 |
| Remove or install aircraft engines, using hoists or forklift trucks. | 핵심 | 0 |
| Inventory and requisition or order supplies, parts, materials, and equipment. | 핵심 | 0.5 |
| Fabricate defective sections or parts, using metal fabricating machines, saws, brakes, shears, and grinders. | 핵심 | 0 |
| Remove or cut out defective parts or drill holes to gain access to internal defects or damage, using drills and punches. | 핵심 | 0 |
| Clean, refuel, and change oil in line service aircraft. | 핵심 | 0 |
| Communicate with other workers to coordinate fitting and alignment of heavy parts, or to facilitate processing of repair parts. | 핵심 | 0 |
| Clean engines, sediment bulk and screens, and carburetors, adjusting carburetor float levels. | 핵심 | 0 |
| Spread plastic film over areas to be repaired to prevent damage to surrounding areas. | 핵심 | 0 |
| Check for corrosion, distortion, and invisible cracks in the fuselage, wings, and tail, using x-ray and magnetic inspection equipment. | 핵심 | 0.5 |
| Listen to operating engines to detect and diagnose malfunctions, such as sticking or burned valves. | 핵심 | 0 |
| Accompany aircraft on flights to make in-flight adjustments and corrections. | 핵심 | 0 |
| Trim and shape replacement body sections to specified sizes and fits and secure sections in place, using adhesives, hand tools, and power tools. | 보조 | 0 |
| Prepare and paint aircraft surfaces. | 보조 | 0 |
| Disassemble engines and inspect parts, such as turbine blades or cylinders, for corrosion, wear, warping, cracks, and leaks, using precision measuring instruments, x-rays, and magnetic inspection equipment. | 보조 | 0.5 |
| Determine repair limits for engine hot section parts. | 보조 | 0 |
| Cure bonded structures, using portable or stationary curing equipment. | 보조 | 0 |
| Remove, inspect, repair, and install in-flight refueling stores and external fuel tanks. | 보조 | 0 |
직업 정보
출처와 귀속
This page includes information from the O*NET® 31.0 Database (https://www.onetcenter.org/database.html) by the U.S. Department of Labor, Employment and Training Administration (USDOL/ETA). Used under the CC BY 4.0 license (https://creativecommons.org/licenses/by/4.0/). O*NET® is a trademark of USDOL/ETA. AI Changing Work has modified all or some of this information: the O*NET-SOC code, title and task statements are reproduced in English without change; task-type labels are shown in the page's language and tasks are listed core first; any Korean occupation title shown on the Korean-language page is AI Changing Work's translation; any KSCO-8 unit groups linked to this occupation were paired with it by AI Changing Work's judgment, and the relation labels and statuses are AI Changing Work's additions. USDOL/ETA has not approved, endorsed, or tested these modifications.
Any AI exposure figures on this page are published by third parties, not by AI Changing Work, and none is part of the O*NET information. OpenAI publishes task-level scores (MIT License) for O*NET 27.2 task statements; each is shown next to the O*NET 31.0 task statement with the same task ID, whose wording can differ from the 27.2 statement that was scored. OpenAI also publishes occupation-level scores for O*NET-SOC codes in the same release, and any such score is shown on the O*NET occupation with the same code. Anthropic publishes an observed exposure index in the Anthropic Economic Index (CC-BY), and the U.S. Bureau of Labor Statistics publishes relative AI exposure categories (public domain); both are published per SOC code, and each value is shown on every O*NET occupation with that code. The International Labour Organization publishes a generative AI exposure index in ILO Working Paper 140 (CC BY 4.0) for ISCO-08 unit groups; AI Changing Work links those groups to O*NET occupations by applying the U.S. Bureau of Labor Statistics ISCO-08 to 2010 SOC and 2010 SOC to 2018 SOC crosswalks as published, without case-by-case selection, and these crosswalks match many groups only in part. Where several unit groups are linked, each group's published value is listed, and any summary shows only the lowest and highest of those values with the number of groups; no exposure figure is averaged or recalculated. Any employment figures are published by the U.S. Bureau of Labor Statistics for the SOC group containing this occupation. Each source is credited where its figures are shown.
O*NET OnLine: 49-3011.00 Aircraft Mechanics and Service Technicians
KSCO 코드·명칭: 한국표준직업분류(제8차 개정) — 통계청 고시 제2024-328호 (2024-07-01 고시, 2025-01-01 시행). 저작권법 제7조 제2호의 고시 항목이다. 명칭 표기(가운뎃점·띄어쓰기)는 해설서 2차 정오 반영판의 표기를 따랐으며, 고시 항목표와는 18개 명칭에서 가운뎃점 글리프나 띄어쓰기만 다르다. 통계청은 2025년 10월 국가데이터처로 개편되었다. 이 페이지의 KSCO 연결은 통계청·국가데이터처의 공식 연계표가 아니다.