자동차 차체 및 관련 수리원
설치·정비·수리직Automotive Body and Related Repairers
- O*NET-SOC 코드
- 49-3021.00
Repair and refinish automotive vehicle bodies and straighten vehicle frames.
한국어 직업명은 AI Changing Work의 번역입니다. 과업 문장과 원천 값은 공표된 영문 그대로 표시합니다.
AI 노출도
- 데이터 출처: BLS발행 시점: 2026-08
낮음· 상대
낮음4단계 상대 범주매우 높음직업군 단위 값
척도 · 모수 · 출처
4단계 상대 범주 (낮음 / 보통 / 높음 / 매우 높음)
BLS 고용전망 표의 세부직업 831개 기준. 값은 NEM(전국고용매트릭스) 코드 단위로 부여되므로, 같은 NEM 코드를 쓰는 직업은 같은 밴드를 받습니다
- 데이터 출처: Anthropic발행 시점: 2026-03
0.000
0.000여기 실린 값의 범위0.745척도 · 모수 · 출처
관측 노출 지수, 발행된 그대로 0–1
O*NET 과업 매핑 기준
SOC 2018 직업 단위로 발행된 값이며, 같은 SOC 2018 코드를 가진 O*NET 직업은 모두 이 값을 받습니다
- 데이터 출처: ILO발행 시점: 2025
0.18
0.09여기 실린 값의 범위0.70직업군 단위 값
척도 · 모수 · 출처
생성형 AI 노출 지수, 발행된 그대로 0–1
ISCO-08 직업군 단위로 발행된 값입니다. 미국 노동통계국(BLS)의 공식 교차표(ISCO-08→2010 SOC, 2010 SOC→2018 SOC)를 그대로 적용해 이 직업에 연결했으며, 연결은 전부 또는 일부 대응입니다
이 원천이 어떤 종류의 값인가
BLS 범주는 절대 수준이 아니라 상대 순위이며, 1차 측정도 아닙니다. 여러 선행 연구가 매긴 직업별 백분위 순위를 4단계로 묶은 값입니다. 고용·임금 예측도, 도입 확률도 아니며 자동화와 증강을 구분하지 않습니다.
AI 노출도 (OpenAI 루브릭)
평가 과업 25개 · β ≥ 0.5 인 과업 2개 (8.0%)
β = 직접 노출(E1) + 0.5 × 도구 활용 시 노출(E2). 원본 저장소의 정의를 따릅니다.
- 원천 단위: O*NET 27.2 과업 → O*NET 31.0 직업 코드
- 채점된 과업이 모두 O*NET 31.0 과업 목록에 있습니다.
- 출처
- OpenAI "GPTs are GPTs" exposure rubric
- 판
- gh-main-0471612
- 라이선스
- MIT License, Copyright (c) 2024 OpenAI
과업
O*NET® 31.0 Database의 과업 문장입니다. 핵심(Core) 과업을 먼저 보입니다.
| 과업 | 유형 | β (OpenAI) |
|---|---|---|
| File, grind, sand, and smooth filled or repaired surfaces, using power tools and hand tools. | 핵심 | 0 |
| Sand body areas to be painted and cover bumpers, windows, and trim with masking tape or paper to protect them from the paint. | 핵심 | 0 |
| Follow supervisors' instructions as to which parts to restore or replace and how much time the job should take. | 핵심 | 0 |
| Remove damaged sections of vehicles using metal-cutting guns, air grinders and wrenches, and install replacement parts using wrenches or welding equipment. | 핵심 | 0 |
| Cut and tape plastic separating film to outside repair areas to avoid damaging surrounding surfaces during repair procedure and remove tape and wash surfaces after repairs are complete. | 핵심 | 0 |
| Prime and paint repaired surfaces, using paint sprayguns and motorized sanders. | 핵심 | 0 |
| Mix polyester resins and hardeners to be used in restoring damaged areas. | 핵심 | 0 |
| Chain or clamp frames and sections to alignment machines that use hydraulic pressure to align damaged components. | 핵심 | 0 |
| Fill small dents that cannot be worked out with plastic or solder. | 핵심 | 0 |
| Fit and weld replacement parts into place, using wrenches and welding equipment, and grind down welds to smooth them, using power grinders and other tools. | 핵심 | 0 |
| Position dolly blocks against surfaces of dented areas and beat opposite surfaces to remove dents, using hammers. | 핵심 | 0 |
| Remove damaged panels, and identify the family and properties of the plastic used on a vehicle. | 핵심 | 0.5 |
| Review damage reports, prepare or review repair cost estimates, and plan work to be performed. | 핵심 | 0.5 |
| Remove small pits and dimples in body metal, using pick hammers and punches. | 핵심 | 0 |
| Remove upholstery, accessories, electrical window-and-seat-operating equipment, and trim to gain access to vehicle bodies and fenders. | 핵심 | 0 |
| Clean work areas, using air hoses, to remove damaged material and discarded fiberglass strips used in repair procedures. | 핵심 | 0 |
| Adjust or align headlights, wheels, and brake systems. | 핵심 | 0 |
| Apply heat to plastic panels, using hot-air welding guns or immersion in hot water, and press the softened panels back into shape by hand. | 핵심 | 0 |
| Soak fiberglass matting in resin mixtures and apply layers of matting over repair areas to specified thicknesses. | 핵심 | 0 |
| Fit and secure windows, vinyl roofs, and metal trim to vehicle bodies, using caulking guns, adhesive brushes, and mallets. | 핵심 | 0 |
| Replace damaged glass on vehicles. | 핵심 | 0 |
| Inspect repaired vehicles for proper functioning, completion of work, dimensional accuracy, and overall appearance of paint job, and test-drive vehicles to ensure proper alignment and handling. | 핵심 | 0 |
| Cut openings in vehicle bodies for the installation of customized windows, using templates and power shears or chisels. | 보조 | 0 |
| Read specifications or confer with customers to determine the desired custom modifications for altering the appearance of vehicles. | 보조 | 0 |
| Measure and mark vinyl material and cut material to size for roof installation, using rules, straightedges, and hand shears. | 보조 | 0 |
직업 정보
출처와 귀속
This page includes information from the O*NET® 31.0 Database (https://www.onetcenter.org/database.html) by the U.S. Department of Labor, Employment and Training Administration (USDOL/ETA). Used under the CC BY 4.0 license (https://creativecommons.org/licenses/by/4.0/). O*NET® is a trademark of USDOL/ETA. AI Changing Work has modified all or some of this information: the O*NET-SOC code, title and task statements are reproduced in English without change; task-type labels are shown in the page's language and tasks are listed core first; any Korean occupation title shown on the Korean-language page is AI Changing Work's translation; any KSCO-8 unit groups linked to this occupation were paired with it by AI Changing Work's judgment, and the relation labels and statuses are AI Changing Work's additions. USDOL/ETA has not approved, endorsed, or tested these modifications.
Any AI exposure figures on this page are published by third parties, not by AI Changing Work, and none is part of the O*NET information. OpenAI publishes task-level scores (MIT License) for O*NET 27.2 task statements; each is shown next to the O*NET 31.0 task statement with the same task ID, whose wording can differ from the 27.2 statement that was scored. OpenAI also publishes occupation-level scores for O*NET-SOC codes in the same release, and any such score is shown on the O*NET occupation with the same code. Anthropic publishes an observed exposure index in the Anthropic Economic Index (CC-BY), and the U.S. Bureau of Labor Statistics publishes relative AI exposure categories (public domain); both are published per SOC code, and each value is shown on every O*NET occupation with that code. The International Labour Organization publishes a generative AI exposure index in ILO Working Paper 140 (CC BY 4.0) for ISCO-08 unit groups; AI Changing Work links those groups to O*NET occupations by applying the U.S. Bureau of Labor Statistics ISCO-08 to 2010 SOC and 2010 SOC to 2018 SOC crosswalks as published, without case-by-case selection, and these crosswalks match many groups only in part. Where several unit groups are linked, each group's published value is listed, and any summary shows only the lowest and highest of those values with the number of groups; no exposure figure is averaged or recalculated. Any employment figures are published by the U.S. Bureau of Labor Statistics for the SOC group containing this occupation. Each source is credited where its figures are shown.
O*NET OnLine: 49-3021.00 Automotive Body and Related Repairers
KSCO 코드·명칭: 한국표준직업분류(제8차 개정) — 통계청 고시 제2024-328호 (2024-07-01 고시, 2025-01-01 시행). 저작권법 제7조 제2호의 고시 항목이다. 명칭 표기(가운뎃점·띄어쓰기)는 해설서 2차 정오 반영판의 표기를 따랐으며, 고시 항목표와는 18개 명칭에서 가운뎃점 글리프나 띄어쓰기만 다르다. 통계청은 2025년 10월 국가데이터처로 개편되었다. 이 페이지의 KSCO 연결은 통계청·국가데이터처의 공식 연계표가 아니다.