절단·슬라이싱 기계 세팅원, 조작원 및 관리원
생산직Cutting and Slicing Machine Setters, Operators, and Tenders
- O*NET-SOC 코드
- 51-9032.00
Set up, operate, or tend machines that cut or slice materials, such as glass, stone, cork, rubber, tobacco, food, paper, or insulating material.
한국어 직업명은 AI Changing Work의 번역입니다. 과업 문장과 원천 값은 공표된 영문 그대로 표시합니다.
AI 노출도
- 데이터 출처: BLS발행 시점: 2026-08
보통· 상대
낮음4단계 상대 범주매우 높음직업군 단위 값
척도 · 모수 · 출처
4단계 상대 범주 (낮음 / 보통 / 높음 / 매우 높음)
BLS 고용전망 표의 세부직업 831개 기준. 값은 NEM(전국고용매트릭스) 코드 단위로 부여되므로, 같은 NEM 코드를 쓰는 직업은 같은 밴드를 받습니다
- 데이터 출처: Anthropic발행 시점: 2026-03
0.032
0.000여기 실린 값의 범위0.745척도 · 모수 · 출처
관측 노출 지수, 발행된 그대로 0–1
O*NET 과업 매핑 기준
SOC 2018 직업 단위로 발행된 값이며, 같은 SOC 2018 코드를 가진 O*NET 직업은 모두 이 값을 받습니다
- 데이터 출처: ILO발행 시점: 2025
0.23
0.09여기 실린 값의 범위0.70직업군 단위 값
척도 · 모수 · 출처
생성형 AI 노출 지수, 발행된 그대로 0–1
ISCO-08 직업군 단위로 발행된 값입니다. 미국 노동통계국(BLS)의 공식 교차표(ISCO-08→2010 SOC, 2010 SOC→2018 SOC)를 그대로 적용해 이 직업에 연결했으며, 연결은 전부 또는 일부 대응입니다
이 원천이 어떤 종류의 값인가
BLS 범주는 절대 수준이 아니라 상대 순위이며, 1차 측정도 아닙니다. 여러 선행 연구가 매긴 직업별 백분위 순위를 4단계로 묶은 값입니다. 고용·임금 예측도, 도입 확률도 아니며 자동화와 증강을 구분하지 않습니다.
AI 노출도 (OpenAI 루브릭)
평가 과업 28개 · β ≥ 0.5 인 과업 2개 (7.1%)
β = 직접 노출(E1) + 0.5 × 도구 활용 시 노출(E2). 원본 저장소의 정의를 따릅니다.
- 원천 단위: O*NET 27.2 과업 → O*NET 31.0 직업 코드
- 채점된 과업이 모두 O*NET 31.0 과업 목록에 있습니다.
- 출처
- OpenAI "GPTs are GPTs" exposure rubric
- 판
- gh-main-0471612
- 라이선스
- MIT License, Copyright (c) 2024 OpenAI
과업
O*NET® 31.0 Database의 과업 문장입니다. 핵심(Core) 과업을 먼저 보입니다.
| 과업 | 유형 | β (OpenAI) |
|---|---|---|
| Examine, measure, and weigh materials or products to verify conformance to specifications, using measuring devices, such as rulers, micrometers, or scales. | 핵심 | 0 |
| Set up, operate, or tend machines that cut or slice materials, such as glass, stone, cork, rubber, tobacco, food, paper, or insulating material. | 핵심 | 0 |
| Stack and sort cut material for packaging, further processing, or shipping, according to types and sizes of material. | 핵심 | 0 |
| Review work orders, blueprints, specifications, or job samples to determine components, settings, and adjustments for cutting and slicing machines. | 핵심 | 0.5 |
| Type instructions on computer keyboards, push buttons to activate computer programs, or manually set cutting guides, clamps, and knives. | 핵심 | 0 |
| Remove defective or substandard materials from machines, and readjust machine components so that products meet standards. | 핵심 | 0 |
| Press buttons, pull levers, or depress pedals to start and operate cutting and slicing machines. | 핵심 | 0 |
| Adjust machine controls to alter position, alignment, speed, or pressure. | 핵심 | 0 |
| Maintain production records, such as quantities, types, and dimensions of materials produced. | 핵심 | 1 |
| Monitor operation of cutting or slicing machines to detect malfunctions or to determine whether supplies need replenishment. | 핵심 | 0 |
| Start machines to verify setups, and make any necessary adjustments. | 핵심 | 0 |
| Remove completed materials or products from cutting or slicing machines, and stack or store them for additional processing. | 핵심 | 0 |
| Select and install machine components, such as cutting blades, rollers, and templates, according to specifications, using hand tools. | 핵심 | 0 |
| Move stock or scrap to and from machines manually, or by using carts, handtrucks, or lift trucks. | 핵심 | 0 |
| Clean and lubricate cutting machines, conveyors, blades, saws, or knives, using steam hoses, scrapers, brushes, or oil cans. | 핵심 | 0 |
| Feed stock into cutting machines, onto conveyors, or under cutting blades, by threading, guiding, pushing, or turning handwheels. | 핵심 | 0 |
| Position stock along cutting lines, or against stops on beds of scoring or cutting machines. | 핵심 | 0 |
| Change or replace saw blades, cables, cutter heads, and grinding wheels, using hand tools. | 핵심 | 0 |
| Mark cutting lines or identifying information on stock, using marking pencils, rulers, or scribes. | 핵심 | 0 |
| Operate cranes, or signal crane operators to position or remove stone from cars or saw beds. | 보조 | 0 |
| Start pumps to circulate water and abrasives onto blades or cables during cutting. | 보조 | 0 |
| Turn cranks or press buttons to activate winches that move cars under sawing cables or saw frames. | 보조 | 0 |
| Position width gauge blocks between blades, and level blades and insert wedges into frames to secure blades to frames. | 보조 | 0 |
| Direct workers on cutting teams. | 보조 | 0 |
| Tighten pulleys or add abrasives to maintain cutting speeds. | 보조 | 0 |
| Cut stock manually to prepare for machine cutting, using tools such as knives, cleavers, handsaws, or hammers and chisels. | 보조 | 0 |
| Sharpen cutting blades, knives, or saws, using files, bench grinders, or honing stones. | 보조 | 0 |
| Wash stones, using water hoses. | 보조 | 0 |
직업 정보
출처와 귀속
This page includes information from the O*NET® 31.0 Database (https://www.onetcenter.org/database.html) by the U.S. Department of Labor, Employment and Training Administration (USDOL/ETA). Used under the CC BY 4.0 license (https://creativecommons.org/licenses/by/4.0/). O*NET® is a trademark of USDOL/ETA. AI Changing Work has modified all or some of this information: the O*NET-SOC code, title and task statements are reproduced in English without change; task-type labels are shown in the page's language and tasks are listed core first; any Korean occupation title shown on the Korean-language page is AI Changing Work's translation; any KSCO-8 unit groups linked to this occupation were paired with it by AI Changing Work's judgment, and the relation labels and statuses are AI Changing Work's additions. USDOL/ETA has not approved, endorsed, or tested these modifications.
Any AI exposure figures on this page are published by third parties, not by AI Changing Work, and none is part of the O*NET information. OpenAI publishes task-level scores (MIT License) for O*NET 27.2 task statements; each is shown next to the O*NET 31.0 task statement with the same task ID, whose wording can differ from the 27.2 statement that was scored. OpenAI also publishes occupation-level scores for O*NET-SOC codes in the same release, and any such score is shown on the O*NET occupation with the same code. Anthropic publishes an observed exposure index in the Anthropic Economic Index (CC-BY), and the U.S. Bureau of Labor Statistics publishes relative AI exposure categories (public domain); both are published per SOC code, and each value is shown on every O*NET occupation with that code. The International Labour Organization publishes a generative AI exposure index in ILO Working Paper 140 (CC BY 4.0) for ISCO-08 unit groups; AI Changing Work links those groups to O*NET occupations by applying the U.S. Bureau of Labor Statistics ISCO-08 to 2010 SOC and 2010 SOC to 2018 SOC crosswalks as published, without case-by-case selection, and these crosswalks match many groups only in part. Where several unit groups are linked, each group's published value is listed, and any summary shows only the lowest and highest of those values with the number of groups; no exposure figure is averaged or recalculated. Any employment figures are published by the U.S. Bureau of Labor Statistics for the SOC group containing this occupation. Each source is credited where its figures are shown.
O*NET OnLine: 51-9032.00 Cutting and Slicing Machine Setters, Operators, and Tenders
KSCO 코드·명칭: 한국표준직업분류(제8차 개정) — 통계청 고시 제2024-328호 (2024-07-01 고시, 2025-01-01 시행). 저작권법 제7조 제2호의 고시 항목이다. 명칭 표기(가운뎃점·띄어쓰기)는 해설서 2차 정오 반영판의 표기를 따랐으며, 고시 항목표와는 18개 명칭에서 가운뎃점 글리프나 띄어쓰기만 다르다. 통계청은 2025년 10월 국가데이터처로 개편되었다. 이 페이지의 KSCO 연결은 통계청·국가데이터처의 공식 연계표가 아니다.